Search
Search Results
-
High-Rate Microwave Sintering of Ceramics on the Basis of Barium and Strontium Titanates
Using the method of sintering by microwave heating at a rate of 10–100°C/min to a temperature of 1250 °C without isothermal hold, we obtain ceramic...
-
Improvement in sintering behavior and microwave dielectric properties in CaMgGe2O6 via zn substitution
A series of CaMgGe 2 O 6 ceramics doped with Zn 2+ ions were designed and fabricated using the solid-state reaction method. The impact of cation do**...
-
Multiple relaxation mechanisms in SrBi2Nb2O9 ceramic tweaked by tin and samarium incorporation in assistance with single-step microwave sintering
Non-stoichiometric lead free polycrystalline Sr 0.8 Sn 0.2 Bi 1.75 Sm 0.25 Nb 2 O 9 (SSBSN) ferroelectric ceramics were synthesized through conventional solid...
-
Microwave Heating Mechanism of AZ31/HA Metal Matrix Biocomposites
In the present scenario, advancements in biocomposite processing have become the prime research domain for technocrats and manufacturers.... -
Optimization of Sintering Parameters of Lead Oxide Particles for Solid Oxygen Control in Lead Cooled Fast Reactor
Lead oxide ceramic is a kind of material used for the solid phase oxygen control in lead-cooled fast reactor (LFR) and accelerator driven... -
-
Low-loss and ultra-low sintering temperature ceramics of AgCa1−xMgxVO4 (x = 0–0.09) for microwave applications
Pure and Mg-substituted AgCaVO 4 compounds were explored using the conventional solid-state sintering method and their microwave dielectric properties...
-
Enhancing dielectric properties and thermal stability in microwave-synthesized Nd-modified barium titanate nanoceramics for possible MLCC applications
In pursuing enhanced performance for electronic applications, we synthesized ferroelectric materials, specifically Ba (1-x) Nd 2x/3 TiO 3 (BNdTx)...
-
Effects of Y2O3 and Cr3C2 on the microstructure and properties of WC–Co–Ni alloy prepared by microwave sintering
WC–9Co–1Ni cemented carbides with Y 2 O 3 and Cr 3 C 2 additives were obtained through powder metallurgy and microwave sintering. The effects of additives...
-
Comparative study on coprecipitation and microwave hydrothermal synthesis of magnesium aluminum spinel
MgAl 2 O 4 was synthesized by microwave hydrothermal method and coprecipitation method, respectively. X-ray diffractometer (XRD), scanning electron...
-
Size-dependent thermal properties and sintering behaviors of silver nanoparticles: insights from molecular dynamics simulation
Silver nanoparticles are widely utilized in printed electronics for forming conductive lines due to their exceptional electrical conductivity,...
-
Microwave Radiation: Applications in Metrology and Materials Synthesis
Depending on the power radiation level, different applications based on microwaveMicrowaves radiation can be mentioned. For low power levels, in the... -
Comparative studies of structural and dielectric properties of mullite@zirconia composites synthesized by conventional sintering and thermal plasma sintering
Mullite@zirconia (Al 6 Si 2 O 13 -ZrO 2 ) ceramic composite was effectively fabricated by two different synthesis methods, namely conventional sintering and...
-
Adhesion nanoarchitectonics of inkjet-printed silver nanoparticles on various substrates after furnace sintering
The adhesion behavior of inkjet-printed silver nanoparticles (Ag NPs) on various substrates was investigated after furnace sintering at various...
-
Finite Element Analysis of Melting of Bulk Metals Using Microwave Energy at 2.45 GHz
Microwave material processing is a rapid and cost-effective method with significant advantages over conventional methods of material processing. The... -
Microwave dielectric properties of ultra-low-temperature-sintered TiO2 as a τf compensator
TiO 2 ceramics synthesized from the rutile TiO 2 powders with a mean size of ~ 0.4 μm were sintered at temperatures ranging from 500 to 1300 °C. The...
-
Study of electrical and optical properties of microwave sintered composite ferrites at room temperature
Ferrites with the compositional formula NiFe 2 O 4 and BaFe 12 O 19 were prepared by the sol–gel method. These calcined compounds were taken in weight...
-
Structural, magnetoelectric properties of multidoped Ni–Al ferrites for microwave circulator applications
Multidoped Ni–Al ferrites with the composition formula Ni 0.94 Co 0.03 Mn 0.04 Cu 0.03 Fe 1.96− x Al x O 4 (where x = 0, 0.1, 0.3, 0.5, 0.7, and 0.9) were...
-
Phase composition, microstructure, and microwave dielectric properties of Nd[(Zn0.925Co0.075)1/2Ti1/2]O3 derived from glycine–nitrate combustion method
In this paper, nanocrystalline Nd[(Zn 0.925 Co 0.075 ) 1/2 Ti 1/2 ]O 3 (NZCT75) powders were synthesized through glycine–nitrate combustion method with the...
-
Development and Testing of a Method for Continuous Mass Measurement of Dielectric Material Samples During Microwave Heat Treatment
The paper considers methods for continuous mass measurement of dielectric material samples during microwave heat treatment at a frequency of 2.45...