Search
Search Results
-
A Variational Approach to the Determination of the Dynamic Strength of a Material
AbstractThe problem of the determination of material strength properties through the Kolsky experimental technique is considered. Small size...
-
The Effect of Chemical–Mechanical Processing of Silicon Wafers on Their Surface Morphology and Strength
AbstractThe mechanical strength of various silicon wafers with a thickness of 100 μm has been studied, depending on the methods of their preparation...
-
Increasing vection strength by video processing in the periphery of the visual field in a driving simulator
In this paper, we propose a method to increase vection strength through video image processing in the periphery, rather than the center, of the...
-
Defect Structure and Strength Properties of Layered Metal-Intermetallic Composites
The results of 3D modeling of the distribution and accumulation of dislocations and low-angle boundaries in the volume of a layered...
-
Study of the Mechanical Strength of Thin Silicon Wafers in the Dependence on Their Surface Treatment during Thinning
AbstractThe mechanical strength of silicon wafers of 100 μm thickness was studied. Loading of the wafers was carried out by the “ring-on ring”...
-
Interface strength criterion for elastic bodies
Connection (adhesive layer, welded seam, etc.) of solid bodies at the macro-level looks like a zero-thickness object (surface or line). At the...
-
Experimental investigation on impact strength of hybrid fibre reinforced concrete containing steel and polypropylene
The current research investigates the impact resistance of concrete reinforced with a combination of hybrid fibers– crimped steel and polypropylene....
-
Studying the Ultimate Strength and Service Life of Quartz Glass with Protective Coating for Space Vehicle Windows
The paper focuses on the impact of an optically transparent protective coating of an AlSiN system on the short-time ultimate strength of quartz glass...
-
Calculation of Life Characteristics for Structural Alloys under the Mutual Influence of Fatigue and Long-Term Strength
AbstractThe processes of degradation of the initial strength properties of polycrystalline structural alloys are considered under mechanisms that...
-
Influence of Graphene Additives on Dynamic Strength and Failure of Alumina under Shock Loading
AbstractThe results of dynamic testing of alumina samples with different graphene content are presented. The tests were carried out using a split...
-
Prerequisites for Construction of a Device for Measurements of Electric Field Strength with Determination of the Measurement Error
AbstractA new solution is proposed for construction of a device for measurement of electric field strength with determination of the measurement...
-
On the two-photon quantum Rabi model at the critical coupling strength
In this paper, an investigation on the two-photon quantum Rabi model at the critical coupling strength as a function of a control parameter
... -
Influence of the Rate of Directional Crystallization and Silicon Content on the Structure and Strength of the Al–Si–Cu Alloy
AbstractThe structure and strength of Al x Si–2 wt % Cu ( x = 15, 17, and 20 wt %) alloys obtained by directional solidification at a rate of 0.1 and...
-
An Interplay Between the Weakening and Strengthening Effects of Interstitial Water on the Strength of Porous Brittle Solids
The paper is devoted to a study of factors that provide the nonlinear mechanical influence of pore fluid on the stress state, strength, and fracture...
-
On the application of genetic algorithm for predicting the strength of CNT/ABS filaments using multi-scale modeling
This article investigates the strength of nanocomposite filaments produced through extrusion. It involves incorporating carbon nanotubes (CNTs) into...
-
Effect of Pore Size on Strength and Fracture Toughness of Zirconia Ceramics
The deformation behavior of ZrO 2 under compression of cylindrical and three point bending of V-notched beam-shaped samples has been investigated. The...
-
The Significance of Retained Austenite in the High Strength and Plasticity of Medium Carbon Q&P Steel
AbstractThe Fe–0.44%C–1.8%Si–1.3%Mn–0.82%Cr–0.28%Mo steel treated by the quenching–partitioning process showed a product of strength and elongation...
-
Influence of Sonication on the Structure and Strength of Aluminum-Steel Bimetals Produced by Friction Stir Welding
In this paper, the effects of welding speed and ultrasound on the structure and strength of aluminum-steel bimetals produced by friction stir welding...
-
Static, Dynamic, and Shock-Wave Strengths of 17G1S, 09G2S, 10G2FBYu, and K60 Strength Class Pipe Steels
AbstractIn the development of special explosion-proof chambers that must meet strict requirements for strength reliability, an important issue is the...
-
Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM
Effective alternatives to synthetic fiber composites have been found in natural fiber composites, which are being increasingly used in a wide range...