Search
Search Results
-
Novel Phosphate Organic Guanidine Salt Water-Based Additive with Integrated Anti-Friction, Anti-Wear and Anti-Corrosion Properties
Two new phosphate organic guanidine salt water-based additives (P4-G, P8-G) were synthesized, and their tribological properties and anti-corrosion...
-
Preparation and Tribological Behavior of N-doped Graphene Oxide Quantum Dots with MoS2 and Al2O3 Nanocomposites as Lubricant Additive in Aqueous Glycerol
N-doped graphene oxide quantum dots (NGOQDs) with MoS 2 and Al 2 O 3 nanocomposites were prepared by solvothermal method. The morphology and the...
-
Preparation and tribological behavior of TiO2@WO3:Eu3+ powders as lubricant nano-additive for steel-steel contacts
Eu-doped WO 3 (WO 3 :Eu 3+ ) nanoparticles were prepared by the Pechini method. Tetrabutyl titanate (TBOT) was used to prepare TiO 2 -encapsulated WO 3 :Eu 3+ ...
-
Nanofillers in Oil, Lubricant, and Fuel Industry
Scientific tribology is the study of the administration and control of friction, wear, and lubrication. As a consequence, it is everywhere, from... -
Tribological Properties of the Functionalized Graphene/Montmorillonite Nanosheets as a Lubricant Additive
The functionalized graphene/montmorillonite (FG/MTT) nanosheet was synthesized through chemical bonding by a simple, green method, which had...
-
Clarification of the Effect of Surface Energy on Tribological Behavior of Two-Phase Lubricant Using Reflectance Spectroscopy and Hydrodynamic Analysis
Recently, a new type of lubricant called two-phase lubricants has been developed to realize a high viscosity index. Two-phase lubricants are mixtures...
-
Tribological assessment of a water-based nanofluid containing CeO2 nanoparticles supported on multiwalled carbon nanotubes
This work reports the tribological assessment of ceria (CeO 2 ) nanoparticles supported on multiwalled carbon nanotubes as water-based lubricant...
-
A Tribological and Electrochemical Study of Protic Ionic Liquid and Bentonite Particles Used as Lubricating Additives in Water-Based Lubricants
The objective of this work is to evaluate the wear and corrosion behaviours of different formulations of water-based lubricants containing protic...
-
Tribological behaviors of graphene oxide partly substituted with nano-SiO2 as lubricant additives in water for magnesium alloy/steel interfaces
Although graphene oxide (GO) has emerged as an excellent lubricant additive in water, there remain great challenges in their practical application...
-
Organic-Sulfonate Functionalized Graphene as a High Temperature Lubricant for Efficient Antifriction and Antiwear in Water Based Drilling Fluid
The lubricity of drilling fluid resistant to high-temperature over 200 ℃ is still one of the technological breakthroughs. In this study, the graphene...
-
Tribological Behavior of 1,8-Diazabicyclo[5.4.0]Undecane-7-Ene–Organophosphoric Acid-Based Protic Ionic Liquids as Lubricant Additives
Ionic liquids have been found abroad application as lubricant additives due to their unique physic properties, as well as the powerful...
-
Experimental Investigation of Lubricant Oil Tribology and Cylinder Liner Wear in a Compression Ignition Engine Fueled with Biodiesel
This research investigates the impact on lubricating oil tribology and cylinder liner wear when used cooking oil-derived biodiesel is utilized as a...
-
Impact of Multi-walled Carbon Nanotubes as an Additive in Lithium Grease to Enhance the Tribological and Dynamic Performance of Roller Bearing
Multi-walled carbon nanotubes (MWCNTs) have gained a lot of interest in recent years as a lubricant additive for enhancing sliding and rolling...
-
The Comparison of Tribological Characteristics of TMP Based Cotton-Bio Lubricant and Commercial Lubricant for Cylinder Liner-Piston Ring Combination
Globally, bio-lubricants are getting attention as these are sustainable, environment friendly, having good lubricity and can easily be extracted from... -
Short Chain Imidazolium Ionic Liquids: Synthesis and Oil Miscibility in Various Base Oil by use of Surfactant as High Performance Friction and Antiwear Lubricant Additive
The short chain ILs [BMIM] Oleate and [BMIM] Phosphate were explored as lubricant additives in both polar and non-polar base oils through using the...
-
Study on thermal transport behavior of magnesium oxide (MgO) nanostructures as lubricant additives in vegetable oils
Due to harmful impact of petroleum-based fluids and lubricants on the environment and Mankind, vegetable oil-based fluids with incorporation of...
-
Friction and Lubrication of Eye/Lens/Lid Interface: The Effect of Lubricant and Contact Lens Material
Irritation of the eye in the case of contact lens users may imply dry eye syndrome (DES), commonly treated by eye drops. The paper focuses on...
-
Effects of Thickness and Particle Size on Tribological Properties of Graphene as Lubricant Additive
Increasing studies have demonstrated excellent tribological properties of graphene as lubricant additive. Thus, extended explanations of the...
-
Comparing the Tribological Performance of Water-Based and Oil-Based Drilling Fluids in Diamond–Rock Contacts
Oil-based drilling fluids are usually assumed to provide lower friction compared to their water-based alternatives. However, clear evidence for this...
-
Synthesis of nanoSiO2/graphene oxide nanocomposite as a novel engine oil additive for reducing friction and wear
The limited dispersion stability of graphene in lubricating oils and the high cost of chemical deposition method to prepare SiO 2 /GO composite...