Search
Search Results
-
Prospects for Manufacturing Friction Disks from Cold-Rolled Steel
AbstractAssessment of the influence of design factors on the performance of friction disks is given. The necessity of reduction of warpage of disks...
-
Study of the softening behavior of cold-rolled ribbed steel bars under ultra-fast heating
In this study, the effect of ultra-fast heating was achieved by adopting electromagnetic induction heat treatment technology, and the effects of...
-
Polymerised forms in the zirconium conversion coatings on cold-rolled steel: proof of concept
This study validates the proposed polymerised structure, including tetrameric polynuclear species, of solid amorphous oxyhydroxide zirconium...
-
Phase transformations in cold-rolled 304L stainless steel by dilatometry
Phase transformations in cold-rolled (CR) 304L austenitic stainless steel were studied using different techniques, including dilatometry, X-ray...
-
Effect of Low-temperature Annealing on Mechanical Properties of Warm-rolled High Silicon Steel Produced by Twin-roll Strip Casting
The 1.7-mm-thick as-cast 6.5 wt.%Si steel strip was prepared by a top side-pouring twin-roll caster. The strip is subsequently warm-rolled to 0.4 mm...
-
Evaluation of the type and amplitude of the flatness defect of a hot-rolled steel strip produced on a continuous mill
This work presents a brief overview of approaches to evaluate the flatness of hot-rolled strips and regulatory documents for rolled products. The...
-
Multiscale Microstructure Evolution and Subgrain Strengthening of Warm-Rolled Ultrafine Pearlite Steel
To optimize the synergy between the strength and ductility of ordinary medium-carbon steel, a pseudo-eutectic structure with ultrafine pearlite and...
-
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Hot-Rolled Plate from Duplex Stainless Steel 2205
The structure of a hot-rolled plate from duplex stainless steel 2205 is studied after solution treatment. The morphology and the content of phases in...
-
Quantitative Model for the Prediction of the Corrosion Rate of Cold-Rolled 316L STEEL
The austenitic stainless steel 316L is used for numerous components due to its excellent corrosion resistance. However, forming of components...
-
Characteristics of Cracking Propagation During Sulfide Stress Corrosion of Hot-Rolled Duplex Stainless Steel 2205
Duplex stainless steels are generally selected for applications where resistance to corrosion is the most important criteria. Several duplex...
-
Development of Hot-Rolled High-Strength Coil Steel with a Thickness of 4 mm for Load-Lifting Equipment
AbstractThe results of mastering hot rolling under conditions of a continuous wide-band mill 2000 of Severstal PJSC of coiled steel Powerform 700...
-
Surface and Subsurface Defects Formed in a Cold-Rolled Electrical Steel
The causes for the formation of defects of different characteristics on an electrical-grade cold-rolled steel strip surface are presented. Inspection...
-
Study and Prediction of Plasticization of Hot-Rolled Steel Strip During Straightening Under Conditions of Alternating Deformation
This article presents the results of a study on steel strip plasticization during straightening on roller straightening machines. The studies were...
-
Controlled Coil Chilling As Backbone Link in Hot-Rolled Sheet and Plate Steel Production
AbstractIt is shown that the uneven cooling of hot-rolled coiled material leads to inconsistent lengthwise characteristics of metal in a strip from...
-
Fatigue Properties of Rolled Steel Sheets for Automotive Structure
The drive toward weight reduction in the automotive industry has led to high-strength steel sheets for structural applications. Pressing and stam**...
-
The Defining Role of Local Shear on the Development of As-Rolled Microstructure and Crystallographic Texture in Steel
This study involved laboratory unidirectional (UDR) and reverse (RR) cold rolling of steel, and corresponding direct (and indirect) observations of...
-
Influence of the Variation of Mechanical Properties and Thickness in Hot-Rolled Strips of Electrical Anisotropic Steel to Stabilize Cold Rolling
This paper presents the results of a study of the distribution of thickness and mechanical properties along the length and width of hot-rolled strips...
-
Study on the Micro-Texture and Anisotropy of a Cold-Rolled and Intercritically Annealed DP800 Steel
AbstractThe aim of this study was to investigate the micro-texture and plastic anisotropy of a dual phase steel. A DP800 steel was produced by cold...
-
Effect of Hot-Rolled Oxide Scale on Dry/Wet Cyclic Corrosion Behavior of Q370qNH Steel in Simulated Industrial Atmosphere Environment
The corrosion behavior of Q370qNH steel in the presence and absence of hot-rolled oxide scale in simulated industrial atmospheric environment was...
-
The Combined Effects of Plastic Deformation and Two-Phase Annealing, Applied to Hot-Rolled Bands, on the Final Microstructure and Magnetic Properties of Non-oriented Electrical Steel Sheets
The microstructural changes of hot-rolled electrical steel bands (HRB) produced by deformation and annealing have been recently reported. The effects...
