Search

Search Results

1. Physicomechanical Properties and Structure of Multicomponent Titanium-Matrix-Base Alloy Dispersion Epoxy Composites

   The effect of a dispersed powder filler obtained by thermal synthesis from the reaction mixture of 65 wt.% titanium hydride, 30 wt.% ferrosilicon...

   G. A. Baglyuk, O. V. Baranovska, ... D. I. Baranovskyi in Strength of Materials

   Article 01 May 2023
   

2. Fabrication and Physicomechanical Properties of Amorphous Microwires and Microspirals

   Abstract

   Peculiarities of the fabrication and the physicomechanical properties of amorphous microwires and microspirals made from iron- and...

   V. V. Molokanov, O. V. Moroz, ... S. V. Simakov in Russian Metallurgy (Metally)

   Article 27 April 2022
   

3. Physicomechanical Properties of Polyvinyl-Chloride–Polystyrene Plastics

   We study the influence of the nature of polystyrene modifiers and diester-phthalate plasticizers on the surface hardness, Vicat softening point,...

   A. S. Masiuk, V. E. Levytskyi, ... L. M. Bilyi in Materials Science

   Article 01 January 2022
   

4. The Influence of the Dispersed Filler of the Ni–Fe–Si–C System on the Physicomechanical Properties and Structure of Epoxy Composites

   The influence of a dispersed powder filler obtained by thermal synthesis from a mixture of 65% titanium hydride, 30% ferrosilicon, and 5% technical...

   O. V. Baranovska, G. A. Bagliuk, ... D. I. Baranovskyi in Materials Science

   Article 01 March 2024
   

5. Effect of Adding Nanosize SiO₂ on Physicomechanical Properties and Durability of a Refractory Component Industrial Batch

   Physicomechanical properties and structure of mullite-corundum unmolded refractories are investigated and tests of a pilot batch of refractory...

   D. S. Suvorov, B. B. Khaidarov, ... D. V. Kuznetsov in Refractories and Industrial Ceramics

   Article 01 January 2023
   

6. Influence of Molybdenum and Heat Treatment on the Structure, Physicomechanical Properties, and Corrosion Resistance of a Composite Material Based on Ferritic Powder Steel

   Abstract —The structure, the phase composition, the physicomechanical properties, and the corrosion resistance of a precipitation-hardened composite...

   A. Yu. Ivannikov, Yu. A. Klychevskikh, ... A. G. Kolmakov in Russian Metallurgy (Metally)

   Article 01 April 2023
   

7. Effect of Heat Treatment on the Microstructure and Physicomechanical Properties of a Cold-Rolled Strip Made of a 97NL-VI Alloy for Manufacturing Current-Carrying Parts

   Abstract

   Various conditions of quenching and aging of a cold-rolled strip made of a 97NL-VI (98% Ni–2% Be) alloy intended for producing parts of the...

   A. V. Leonov, N. M. Voznesenskaya, ... D. Yu. Nefedkin in Russian Metallurgy (Metally)

   Article 01 November 2022
   

8. Rheological and physicomechanical properties of rod milling sand-based cemented paste backfill modified by sulfonated naphthalene formaldehyde condensate

   Rod milling sand (RMS)—a coarse sand aggregate—was recycled for cemented paste backfill (CPB) for the underground mined area at the **chuan nickel...

   Qinli Zhang, Hao Wu, ... **aoshuang Li in International Journal of Minerals, Metallurgy and Materials

   Article 21 December 2022

9. Morphology and Physicomechanical Properties of Modified Polyamides

   We study the influence of high-molecular weight modifier, i.e., polyvinylpyrrolidone (PVP), on the morphology of polyamide-6. The data of...

   A. S. Masiuk, V. Ye. Levytskyi, ... L. M. Bilyi in Materials Science

   Article 01 July 2022
   

10. Sustainable development goals for industry, innovation, and infrastructure: demolition waste incorporated with nanoplastic waste enhanced the physicomechanical properties of white cement paste composites

    The COVID-19 pandemic significantly impacts the increase in plastic waste from food packaging, masks, gloves, and personal protective equipment...

    M. A. Abdelzaher in Applied Nanoscience

    Article Open access 25 January 2023
    

11. Influence of the Deforming Tool Parameters on the Physicomechanical Properties of the Surface Layer of a Part Subjected to Orbital Burnishing

    Abstract

    The influence of the deforming tool parameters (radius of orbital rotation, the angle of inclination and the radius of the deforming tool) on...

    S. A. Zaides, Fam Wang An in Russian Metallurgy (Metally)

    Article 01 December 2021
    

12. Comparative study on the physicomechanical, bioactivity, and biocompatibility properties of β-wollastonite and β-wollastonite/maghemite/strontium composites

    This study aimed to fabricate and characterise β-wollastonite/maghemite/strontium composites synthesised via an autoclaving method, with and without...

    Muhammad Azmi Abdul Hamid, Hasmaliza Mohamad, ... Hamisah Ismail in Journal of the Australian Ceramic Society

    Article 23 February 2023
    

13. The Influence of Different Factors on Physicomechanical Properties of High Entropy Alloys with fcc Lattice

    The influence of electron concentration, mixing enthalpy, and dimensional mismatch on the lattice parameter, elastic modulus, and normalized hardness...

    V. F. Gorban, S. A. Firstov, M. O. Krapivka in Materials Science

    Article 01 September 2023
    

14. Influence of Interfacial Layers of High Thermal Conductivity on the Distribution of Physicomechanical Fields in Two-Component Structures

    Based on the theory of complex variable calculus and the Stroh formalism, a mathematical model of the generalized plane...

    Ia.M. Pasternak, H. T. Sulym, ... O. P. Iasniy in Materials Science

    Article 01 May 2023
    

15. Effect of graphene addition on the physicomechanical and tribological properties of Cu nanocomposites

    This paper presents an experimental investigation of the mechanical and tribological properties of Cu-graphene nanosheets (GN) nanocomposites. We...

    Adnan I. Khdair, A. Ibrahim in International Journal of Minerals, Metallurgy and Materials

    Article 15 January 2022

16. Increase in the Physicomechanical Properties of Aluminum Alloys Reinforced with Boron Carbide Particles

    Abstract

    To develop a technology for the production of composite Al–Cu–B ₄ C alloys, the structure and properties of aluminum-based alloy with...

    A. L. Alattar, L. N. Nikitina, V. Yu. Bazhin in Russian Metallurgy (Metally)

    Article 01 June 2023
    

17. Physicomechanical Properties of Compositions Based on Butadiene–Nitrile Rubbers after Long-Term Exposure to a Drilling Fluid

    Abstract

    The influence of a drilling fluid on the physicomechanical properties of commercial rubbers of two types (RTD-1, RTD-2), which are used as...

    A. A. Mironova, V. N. Aptukov, ... V. V. Bulatov in Russian Metallurgy (Metally)

    Article 27 April 2022
    

18. Physicomechanical Parameters of Cutting of Deposited Coatings

    We study the physicomechanical parameters of turning of deposited coatings by tools made of a superhard material based on boron nitride (hexanite-R)....

    V. V. Kolomiyets, R. V. Antoshchenkov, ... І. V. Halych in Materials Science

    Article 01 March 2022
    

19. Physicomechanical Properties of Coatings Based on Max Ti₂AlC and (Ti, Nb)₂AlC Phases at 20°C and 500°C

    Physicomechanical characteristics of 15Kh16k5N2MVFAB-Sh steel (0.15C–16Cr–5Co–2Ni–0.7V–0.6Mo–0.3Nb–0.4N): wear resistance at 20°C and 500°C and...

    V. Ya. Podhurska, O. S. Kuprin, ... M. O. Bortnytska in Materials Science

    Article 01 July 2023
    

20. Influence of Redox Cycling on the Physicomechanical Properties of Ceramics of the ZrO₂ –Y₂O₃ –CeO₂ –Al₂O₃ –NiO–CuO System

    We study the influence of one-time reduction and redox cycling at 600°С in different hydrogencontaining media in the absence and in the presence of...

    B. D. Vasyliv, V. Ya. Podhurska, ... А. V. Shylo in Materials Science

    Article 01 March 2022