Search
Search Results
-
Numerical Study on the Combustion Phenomena in the Gas Region of a Top-Blown Converter With Single-Flow Post-Combustion Oxygen Lance
Post-combustion (PC) technology is a clean heat compensation method by introducing an additional amount of oxygen to further oxidize CO into CO 2 , and...
-
Combustion of Inhomogeneous Titanium + Carbon Black Powder Mixture
AbstractThe stability of combustion of titanium + carbon black powder mixture to a local excess of the component was experimentally studied. The...
-
Laser-Induced Fluorescence in Combustion Research
Laser-induced fluorescence (LIF) is a highly regarded diagnostic technique within the field of combustion science. The LIF process primarily involves... -
CFD Numerical Simulation of Operation Optimization for Energy Saving during Combustion Period of Kalugin Top Combustion Hot Blast Stove
A three-dimensional steady-state CFD model of an industrial Kalugin hot stove was established and used to predict flow, temperature and concentration...
-
Explanation of Increase in Combustion Velocity of Ti + C Powder Mixture upon Dilution with Nickel Using Convective–Conductive Combustion Model
AbstractFor the first time, a comparative study of the macrokinetic combustion parameters for granular and powder Ti + C and (Ti + C) + 20% Ni...
-
Nanophotonic catalytic combustion enlightens mid-infrared light source
The tunable mid-infrared source in a broad-spectrum heralds great scientific implications and remains a challenge. Nano-localized catalytic...
-
Combustion Synthesis of Cermets from Granular Mixtures Ti–C–NiCr for Protective Coatings
AbstractThe combustion modes of granular mixtures (100 – X )(Ti + C) + X NiCr, X = 0–30%, were studied. The experimental setup provided filtration of...
-
Nanostructured Metal Foams via Combustion Synthesis
Nanostructured metal foams, unlike the analogous inorganic aerogels, have a backbone that is constructed with zerovalent metal materials – instead of... -
Combustion Initiation in Gas-Free Mixture by Local Hot Spot
AbstractThe combustion initiation of condensed mixture with unlimited mass by limited high-temperature spot was mathematically modelled. It was shown...
-
Influence of Front Instability on the Combustion Initiation in Gas-Free Mixture by Local Hot Point
AbstractThe initiation of combustion of a large mass of condensed mixture being in local contact with the end of the burning layer was mathematically...
-
Toluene combustion on MnOx, CeO2, and Mn-Ce-O solids prepared via citrate complexation, and citrate and urea combustion methods
MnO x , CeO 2 , and MnCe-O (Mn/Ce = 1) solids have been prepared via the citrate complexation and combustion method using citrate and urea precursors....
-
The Effect of Impurity Gas on the Combustion Mode of Granular Mixtures Ti–C–B
AbstractExperimental studies of the combustion of granular mixtures (100 – X )(Ti + C) + X (Ti + 2B), 0 ≤ X ≤ 100 wt %, were carried out. Granules 0.6...
-
Structural Macrokinetics of Combustion of Ti-Based Mixtures with Titanium Particles of Different Sizes
AbstractExperimental dependences of the combustion velocity on the size of titanium particles for powder and granular mixtures of 5Ti + 3Si, Ti + C am ...
-
Stability of Stationary Filtration Combustion Front of Porous Metal Compounds
AbstractThe influence of geometric factors on the filtration combustion of metal powder layer was mathematically modelled and experimentally studied....
-
Combustion of Ti + C and Ti + B Mixtures with Ti Powder Prepared via SHS Hydrogenation and Dehydrogenation
AbstractThe combustion of mixtures consisting of titanium powder prepared by SHS hydrogenation and dehydrogenation and black carbon/ boron was...
-
Effect and Mechanism of Rare Earth Hydrotalcite Inhibiting Coal Spontaneous Combustion
A hydrotalcite(layered double hydroxide, LDH) inhibitor which is suitable for the whole process of coal spontaneous combustion and a LDH inhibitor...
-
Features of Initiation and Combustion of Hf/PTFE Reactive Materials
AbstractThe optimum composition of components in the Hf/PTFE system was determined by thermodynamic calculation. The composition 65Hf/35PTFE (in wt...
-
Combustion synthesis of porous β-SiAlON from aluminum ferrosilicon and aluminosilicate hollow microspheres
SiAlON ceramics is a unique material used in various applications. Producing porous SiAlON material from available industrial waste by combustion is...
-
Efficient construction of Al/F microspheres in Pickering emulsion to regulate combustion reactivity
Aluminum (Al) fluoropolymer composites are widely used in the field of energetic materials. At present, it is a research hotspot to improve the...
-
Cavitation Failure Analysis of Cylinder Liner in Diesel Engines Caused by Increased Combustion Pressure
In this paper, a coupled modeling method considering cylinder liner vibration and coolant cavitation is proposed. The difference in coolant...