Search

Search Results

1. Phosphorus Enrichment Capacity of Calcium Silicates in Multiphase Dephosphorization Slag Based on Laboratory High Temperature Experiments and IMCT

   The present work aims to study the phosphorus enrichment capacity of four kinds of calcium silicate in multiphase dephosphorization slag under...

   Han Sun, Wen-Kui Yang, ... Jian Yang in Metallurgical and Materials Transactions B

   Article 16 May 2023
   

2. Dissolution of Calcium Silicates in Molten CaCl₂

   Electrodeposition of silicon in molten CaCl ₂ has been drawing increasing attention. Soluble silicate anions in the melt can be reduced and tailored...

   **aotian Cheng, **ao Yang in Metallurgical and Materials Transactions B

   Article 11 November 2022
   

3. Development of Silicates and Spraying Techniques for Environmental Barrier Coatings

   Currently, silicon carbide fibre-reinforced silicon carbide matrix ceramic matrix composites are widely used as high-temperature components for...

   Ayahisa Okawa, Son Thanh Nguyen, ... Koichi Niihara in Ceramic Coatings for High-Temperature Environments

   Chapter 2024
   

4. Influence of samarium do** on the phase stability and optical properties of calcium silicates derived from agro-food wastes

   Calcium silicates are very stable and good hosts for luminescent materials. These calcium silicates are synthesized using cost-effective agro-food...

   Manmeet Kaur Chhina, K. Singh in Journal of Materials Science: Materials in Electronics

   Article 09 October 2021
   

5. Fibroin reinforced, strontium-doped calcium phosphate silicate cements for bone tissue engineering applications

   Calcium phosphate silicate cements (CPSCs) have been developed to overcome problems like high acidity due to presence of brushite and high...

   Gülhan Işık, Ahmet Engin Pazarçeviren, ... Ayşen Tezcaner in Journal of Materials Research

   Article 02 November 2023
   

6. Comparative study of Eu³⁺ doped calcium borate glasses and crystalline calcium hexaborate phosphors

   Calcium borate glasses and crystalline calcium hexaborate phosphors were prepared by do** with varying concentration of Eu ₂ O ₃ . Crystalline samples...

   Suruchi Sharma, Shiffali Middha, ... Banghao Chen in Journal of Materials Science: Materials in Electronics

   Article 16 January 2024
   

7. Flotation separation depressants for scheelite and calcium-bearing minerals: A review

   Owing to the depletion of wolframite, the focus of tungsten extraction has gradually shifted to scheelite. However, separating the associated...

   Ziming Wang, Bo Feng, Yuangan Chen in International Journal of Minerals, Metallurgy and Materials

   Article 25 August 2023

8. Corrosion Resistance of Calcium Aluminate Cements in Sewer Environments

   This chapter provides a compact overview of the durability of calcium aluminate cements (CAC) in comparison to Portland cements (PC) in the context...

   Neven Ukrainczyk, Cyrill Grengg in Microbiologically Influenced Corrosion of Concrete Sewers

   Chapter 2023
   

9. Synthesis of Wollastonite Ceramic Using Lime Production Calcium Containing Waste

   Compositions of ceramic mixes for producing wollastonite-containing ceramics using calcium containing lime production waste are developed. Prototypes...

   R. Yu. Popov, A. S. Samsonova, ... O. M. Reven’ko in Refractories and Industrial Ceramics

   Article 01 March 2023
   

10. Effect of Ca/Mg molar ratio on the calcium-based sorbents

    Steelmaking industry faces urgent demands for both steel slag utilization and CO ₂ abatement. Ca and Mg of steel slag can be extracted by acid...

    Yumeng Li, Qing Zhao, ... Ron Zevenhoven in International Journal of Minerals, Metallurgy and Materials

    Article 15 November 2023

11. Maximising the benefits of calcium carbonate in sustainable cements: opportunities and challenges associated with alkaline waste carbonation

    Cement production significantly contributes to global climate change and implementation of carbon capture, utilisation and storage (CCUS) in...

    Fei **, Mingshan Zhao, ... Liwu Mo in npj Materials Sustainability

    Article Open access 19 January 2024
    

12. Effect of silicon in calcium phosphate cements to obtain nanopore scaffolds for medical applications

    We have developed a new biomaterial based on calcium silicate and calcium phosphate whose structure and properties depend on the silicon content. The...

    Julia Lucas-Aparicio, Carmen Rueda, ... Enrique López-Cabarcos in Emergent Materials

    Article 30 December 2023
    

13. About the Influence of Silicate Binding on Strength of Iron Ore Pellets from Highly Enriched Concentrates

    Abstract

    The strength of the structure of iron ore pellets is one of the conditions for their successful transportation from manufacturer to consumer....

    I. S. Bersenev, G. G. Bardavelidze, ... A. A. Sushkevich in Steel in Translation

    Article 01 August 2023

14. Effect of Calcium Aluminate-Based Additive on Properties of Periclase-Carbon Refractories for Steel-Teeming Ladles

    Premature decommissioning of a steel-teeming ladle lining due to critical localized damage, which significantly reduces lining functional properties,...

    A. O. Migashkin in Refractories and Industrial Ceramics

    Article 01 November 2023
    

15. Physicochemical characteristics of mineral trioxide aggregate depending on the ratio of di- and tricalcium silicates

    Mineral trioxide aggregate (MTA) has gained attention as a bioactive endodontic material used for root-end filling, root repair, pulp cap**, and...

    Se Woong Lee, Okmin Park, ... Sang-il Kim in Journal of the Korean Ceramic Society

    Article 13 September 2023
    

16. Structure, Formation, Properties, and Application of Calcium and Magnesium Silicate Hydrates System—A Review

    In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H), at the same time to make up...

    Jianmin **ao, Hui Li, Yaru Hu in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 25 May 2023

17. Nanoindentation Hardness and Modulus of Al₂O₃–SiO₂–CaO and MnO–SiO₂–FeO Inclusions in Iron

    Oxide inclusions appear in steel as a subproduct of steelmaking. These are generally detrimental to alloy properties; however, variations exist in...

    Alejandra Slagter, Jonathan Aristya Setyadji, ... Andreas Mortensen in Metallurgical and Materials Transactions A

    Article Open access 27 February 2024
    

18. Investigation on bioactivity, mechanical stability, bactericidal activity and in-vitro biocompatibility of magnesium silicates for bone tissue engineering applications

    The current work reports the biocompatibility and mechanical stability of enstatite and forsterite bioceramics prepared by sol–gel combustion method....

    Senthil Kumar Venkatraman, Rajan Choudhary, ... Sasikumar Swamiappan in Journal of Materials Research

    Article 16 January 2022
    

19. Effects of different surface treatment methods on the micro-shear bond strength of calcium silicate–based materials

    The present in vitro study aimed to evaluate the influence of various surface treatments on the micro-shear bond strength (μSBS) of calcium...

    Aliye Tugce Gurcan, Soner Sismanoglu in Journal of the Australian Ceramic Society

    Article 22 August 2023
    

20. Synthesis of Calcium Hydrosilicates by the Hydrothermal Desiliconization of Quartz–Titanium Concentrates Followed by Wollastonite Crystallization

    Abstract

    The results of studying the associated synthesis of calcium hydrosilicates during the hydrometallurgical desiliconization of siliceous...

    Yu. V. Zablotskaya, G. B. Sadykhov, ... A. S. Tuzhilin in Russian Metallurgy (Metally)

    Article 01 November 2021