Search
Search Results
-
Evaluation of EN AW 3003 Aluminium Alloy Homogenization with Specific Electrical Resistivity Measurement
The starting point of the research project was the control of the homogenizationHomogenization process of EN AW 3003 aluminium alloyEN AW 3003... -
Contact Resistivity of Submicron Hybrid Bonding Pads Down to 400 nm
Three-dimensional (3D) stacking using hybrid bonding is the most scalable method for 3D integration. As the hybrid bonding pad width is reduced to...
-
The Effect of Temperature on the Electrical Resistivity of Sn-Bi Alloys
With low liquidus temperatures, low raw material costs, and non-toxicity, Sn-Bi low-temperature solders are promising candidates for the replacement...
-
Determination of Electrical Resistivity and Impurities of Commercial Graphite Flakes
The demand of battery-grade graphite is rising significantly. Electrothermal purification is one of the ways to achieve 99.9+% purity of graphite... -
Investigation of the Stacking Effects on the Electrical Resistivity of Industrial Baked Anodes
Producing anodesAnode with the highest uniformity and consistent properties is essential to improve the energy efficiencyEfficiency and productivity... -
Research on the Resistivity and Infrared Emissivity of Nonstoichiometric TiCrN Films
By adjusting the nitrogen flux of reactive magnetron co-sputtering, nonstoichiometric TiCrN films were prepared, and the resistivity and infrared...
-
Electrical Resistivity of Charge Materials in the Si Process and Its Effect on Energy and CO2 Emissions
The resistivity of mixtures of charge materials in the Si furnace was investigated from 25 to 1600 °C. Char was measured first, followed by char +... -
In-Situ Monitoring of Phase Transition and Microstructure Evolution in Ni-Based Superalloys by Electrical Resistivity: Direct Comparison With Differential Scanning Calorimetry and Application to Case Studies
In this study, resistivity measurements are made during continuous heating and cooling on four different Ni-based superalloys of different grain...
-
Effect of Sodium Citrate as Complexing Agent on the Electrodeposited CuZn Alloys: Electrochemical, Morphology, Structure, and Electrical Resistivity Studies
AbstractIn this study, sodium citrate (SC) ions were applied as a complexing agent in the co-deposition of CuZn alloy thin film coatings from...
-
Effect of annealing temperature on the piezo-resistivity in crystalline silicon formed by aluminum-induced crystallization
Annealing temperature is one of the key factors affecting the structural and electrical properties of aluminum induced crystalline silicon (AIC-Si)...
-
Titanium Electrical Resistivity in Hydrogen and Deuterium
Electrical resistivity of pure titanium has been measured using the electrochemical impedance spectroscopy technique under an atmosphere of hydrogen...
-
Enhancing the Thermoelectric Power Factor by Lowering the Electrical Resistivity of Bi2Se3/NaI Composites Prepared by Solid-State Reaction
The current work is focused on the thermoelectric properties of Bi 2 Se 3 /NaI synthesized by solid-state reaction. X-ray diffraction data show that Bi 2 Se
-
Sign reversal and manipulation of anomalous Hall resistivity in facing-target sputtered Pt/Mn4N bilayers
The magnetic and electronic transport properties manipulated by spin–orbit torque have been devoted much attention as they show a great promise for...
-
Transmittance, structure and resistivity of ZnO films doped with Ga and In elements for TCO applications
The transmittance, structure and electrical characteristics of ZnO crystalline films obtained by spray pyrolysis and doped with Ga and In elements...
-
Microstructure and Electrical Resistivity of In Situ Cu-Fe Microcomposites
This paper studied the electrical resistivity of in situ Cu-Fe microcomposites using theoretical analysis and experiments. The model alloys Cu-XFe ( X ...
-
Wide bandgap Indium-doped SnO2 semiconductor prepared by sol-gel route: Multilayer fabrication and Low resistivity for solar cell application
Pure and In-doped tin oxide (SnO 2 ) thin layers grown by sol-gel route are investigated. Such layers annealed at 500 °C during 1 h exhibit a good...
-
Influence of thickness on the resistivity and infrared emissivity of TiN films
TiN films with low infrared emissivity were obtained using reactive magnetron sputtering. The influence of deposited thickness (309, 645, 1248, and...
-
Sputter-Deposited Mo Thin Films: Multimodal Characterization of Structure, Surface Morphology, Density, Residual Stress, Electrical Resistivity, and Mechanical Response
Multimodal datasets of materials are rich sources of information which can be leveraged for expedited discovery of process–structure–property...
-
Influence of Dry and Wet Etching on AlInSb Contact Resistivity, Transfer Length, and Sheet Resistance Using Circular Transmission Model
The ohmic contact property is a major concern in semiconductors, and in particular InSb 2DEG devices, that is essentially related to the surface...
-
Mullite-bonded porous SiC-based Mn3O4–Ni system: control of electrical resistivity, flexural strength, and extrusion
An electrically conductive mullite-bonded porous SiC-based Mn 3 O 4 –Ni system was designed, which provided low-temperature sintering and excellent...