Search
Search Results
-
Atomistic Simulation of the Effect of H-Phase Precipitate on the Transformation Temperatures and Stress-Induced Phase Transformation in Ni-Rich NiTiHf
Precipitation hardening is considered the most feasible method for strengthening NiTiHf alloys. In order to design the optimum aging treatment to...
-
Solidification Microstructure Reconstruction and Its Effects on Phase Transformation, Grain Boundary Transformation Mechanism, and Mechanical Properties of TC4 Alloy Welded Joint
In this study, the solidification microstructure, reconstructed by the method of parent grain crystallographic reconstruction (PGCR), was studied for...
-
A Phase Transformation Enthalpy Parameter for Modeling Quench Hardening of Steels
The effect of phase transformations on the steel/quenchant interfacial heat flux during quench hardening heat treatment is investigated in the...
-
Phase Composition and Phase Transformation of Additively Manufactured Nickel Alloy 718 AM Bench Artifacts
Additive manufacturing (AM) technologies offer unprecedented design flexibility but are limited by a lack of understanding of the material...
-
Phase Transformation in Al/Zn Multilayers during Mechanical Alloying
In this work, mechanical alloying of the alternating stacked pure Al and Zn thin foils was accomplished via high-pressure torsion (HPT). In the...
-
Relaxation of the Excess Free Volume of the Phase Transformation at the Phase Interface between the Crystal and the Melt
AbstractThe paper analyzes the excess free volume relaxation mechanism of the phase transformation, which is realized in the local dilatation region...
-
Precise regulation of the phase transformation for pyrolusite during the reduction roasting process
The mechanism involved in the phase transformation process of pyrolusite (MnO 2 ) during roasting in a reducing atmosphere was systematically...
-
Ultra-strong metal/high entropy alloy nanolaminates: Utilizing size constraining effects on phase transformation
In this work, the phase stability of non-equiatomic Fe 50 Mn 30 Co 10 Cr 10 and Fe 50 Mn 30 Co 10 Ni 10 high entropy alloys (HEAs) under strong constraining...
-
Flow Characteristics Analysis of TC18 Titanium Alloy during Hot Deformation Based on Phase Transformation
An accurate flow stress model was established by considering the parameters of strain rate, strain and temperature as well as β → α + β phase...
-
Iron Polymorphism. Part 3. Iron Polymorphic Transformation as a Phase Transformation Based on High-Temperature Solid-State Volume Photon Ionization
AbstractThe model of the metal bond structure based on an electrostatic coordination sphere as a basic element of the metal crystal lattice is...
-
Influence of Plastic Anisotropy and Strain path on strain-induced Phase Transformation of Cobalt
The objective of this paper is to contribute to a better understanding of the deformation mechanisms of a rolled polycrystalline cobalt sheet. In...
-
Characterization of Multiaxial Creep Behaviors of 16MND5 Steel at Pre- and Post-phase Transformation
In-vessel retention (IVR) constitutes a pivotal strategy aimed at ensuring the structural integrity of the reactor pressure vessel (RPV). The lower...
-
Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron
We document that in unstressed, undeformed, samples of pure iron containing silica inclusions precipitated by melt deoxidation, the iron matrix and a...
-
Influence of Mn–Si elements on the kinetics of oxidative phase transformation under continuous cooling conditions and modeling study
In this paper, a simultaneous thermal analyzer carried out isothermal eutectoid transformation experiments of Fe–0.4Mn, Fe–1.2Mn, and Fe–1.2Mn–0.2Si...
-
Consequences of Cold Deformation Phase Transformation in Chromonickel Steel
AbstractThe consequences of cold deformation phase transformation in chromium–nickel steel 12Kh18N10T have been studied. A metallographic study of...
-
Grain boundary migration facilitated by phase transformation and twinning in face-centered cubic metals
Migration of symmetric tilt grain boundaries (STGBs) in face-centered cubic (FCC) metals under shear loading is investigated in this work. The STGBs...
-
Repetitive Nanosecond Laser-Induced Oxidation and Phase Transformation in NiTi Alloy
NiTi shape memory alloys, known as Nitinol, are highly valuable in medical fields for their unique attributes, including superelasticity, wear...
-
Study on Nucleation and Growth of Columnar Grains in Non-Oriented Steel by Phase Transformation
AbstractThe nucleation and growth of {100}-textured and “toothed” columnar grains in Fe–0.5% Mn non-oriented electrical steels were analyzed by...
-
Phase Transformation Behavior of NiTi Triply Periodic Minimal Surface Lattices Fabricated by Laser Powder Bed Fusion
Laser powder bed fusion (LPBF) is an appealing additive manufacturing technique suitable for producing intricate products with complex shapes, where...
-
Investigation of non-uniformity of temperature distribution and phase transformation in spiral bevel gears during carburizing and quenching
Although extensive research has been done on distortion of heat-treated steel parts, our understanding of heat-treated distortion in spiral bevel...