Search
Search Results
-
Microstructure and Mechanical Properties of High-Chromium Cast Iron/Low-Carbon Steel Composite Prepared by Hot Rolling Process
The objective of this study is to clad low-carbon steel (LCS) to high-chromium cast iron (HCCI) by using hot rolling process. The results show that...
-
Preparation of CoO/SnO2@NC/S composite as high-stability cathode material for lithium-sulfur batteries
To improve the sulfur loading capacity of lithium-sulfur batteries (Li-S batteries) cathode and avoid the inevitable “shuttle effect”, hollow N doped...
-
Fabrication of Ultrathin rGO Sheet-Wrapped Mixed-Phase MnSe2/CoSe2 Nanocomposite for High-Performance Supercapacitor Electrodes with Long-Term Stability
Binary transition metal chalcogenides and reduced graphene oxide exhibit significant potential for energy storage devices due to their superior...
-
Structure and Phase Composition of Diffusion Zone in Copper M1 + Alloy MA2-1 Composite
Diffusion zone growth kinetics and its phase composition after heat treatment of the bimetal obtained by explosive welding of copper M1 + magnesium...
-
Numerical Simulation and Experimental Study of Al/Mg Bimetallic Extrusion Shear Forming
Al/Mg alloys are extruded at different temperatures to form coated rods by extrusion shear (ES) deformation technology. The deformation behavior of...
-
PtPd alloy nanoparticles supported on CuFe2O4 submicrospheres with enhanced synergistic catalysis for reduction of p-nitrothiophenol
We have developed a facile three-step fabricating procedure whereby uniformly dispersed and highly catalytically active PtPd bimetal nanoparticles...
-
Influence of DC Current on Corrosion Behaviour of Copper–Aluminium Composite Plates
In this study, neutral salt spray accelerated corrosion test of copper–aluminium composite under 0–125A DC current was carried out under 5%...
-
An Experimental Study on the Creep Behavior of Al 1050/Mg AZ31B Bilayer Sheet Fabricated via Roll Bonding
This article presents an experimental study on the mechanical properties, creep behavior, and microstructure of an Al 1050/Mg AZ31B-laminated metal...
-
Effect of Hot-Rolling Deformation on Microstructure and Sliding Wear of High-Chromium Cast Iron
Sandwich-structured composite plates, in which high-chromium cast iron (HCCI) was cladded by low-carbon steel (LCS), were newly prepared by a...
-
Facile Fabrication of Micron-Laminated Cu-Al2O3 Coating with Long-Lasting Antifouling Performance and Excellent Wear Resistance
Marine biofouling is a worldwide issue that has aroused great concern in scientific community. Herein, a micron-laminated Cu-Al 2 O 3 composite coating...
-
Preparation of NiCo/NPC composites and study on their wave absorbing properties
With the rapid development of electronic communication equipment, the problem of electromagnetic pollution has become increasingly prominent....
-
Effect of Alloyed Coating Composition on Composite Casting Surface Layer Properties
A method of casting surface alloying during casting using gasified models with the formation of a wear-resistant surface layer is considered. The...
-
Graphene oxide–supported Cu/Co nano-catalysts for thermal decomposition of ammonium perchlorate composites
In this work, graphene oxide–supported Cu/Co nano-catalysts with low scale and large surface area were prepared by solvothermal and heat treatment,...
-
Production of Composite Steel Strips on Continuous Casting and Deformation Assembly
AbstractThis article describes the resource-saving assembly of continuous casting and deformation for production of three-layer bimetallic strips...
-
Effect of Casting Temperature on the Microstructure and Mechanical Properties of Cu-10Pb-10Sn/42CrMoS4 Bimetallic Hydraulic Cylinder Block
The CuPb10Sn10/42CrMoS4 bimetallic hydraulic cylinder block was manufactured in a continuous furnace, while the microstructure evolution and...
-
Effect of Steplike Plastic Deformation on the Mechanical Properties and the Fracture of the Bimetal Produced by Exposition Welding
AbstractThe mechanical properties and the structure of the 08Kh18N10T steel/grade 10 steel bimetallic welded joint formed by explosion welding after...
-
Molecular dynamics simulation of Cr–O–C discrete nuclei to reduce the binding force of nanocrystalline Cu/Ni complexes
The demolding process of electroforming technology in fabricating microstructured optical-functional thin films produces the problem of excessive...
-
Investigating Aluminum and Copper Role in Simulating the Extrusion Process of Bimetal Tubes by Finite Element Method
In this research, the extrusion of copper and aluminum in cylindrical forms was investigated by finite element simulation. In addition, the effect of...
-
In situ synthesis of cubic PtPd bimetallic co-catalyst on C3N4 nanosheets for photocatalytic hydrogen generation
The severe recombination of photoinduced carriers is one of the major problems encountered in C 3 N 4 -based photocatalyst for hydrogen generation....
-
Preparation of porous sea-urchin-like CuO/ZnO composite nanostructure consisting of numerous nanowires with improved gas-sensing performance
A sea-urchin-like CuO/ZnO porous nanostructure is obtained via a simple solution method followed by a calcination process. There are abundant pores...