Search
Search Results
-
Role of Bi/Te co-dopants on the thermoelectric properties of SnSe polycrystals: an experimental and theoretical investigation
A sustainable solution to the energy crisis may be found in thermoelectric materials and generators, capable of transforming thermal energy into...
-
Characteristics and Formation Mechanism of Ca–Mg–Al–Si–O + (Ca,Mn)S Duplex Inclusions in Ca–S Free-Cutting Steel
Large numbers of long strip-shaped pure MnS inclusions in steel will result in anisotropy of mechanical properties. To obtain more duplex (Ca,Mn)S...
-
Study on Stress Corrosion Cracking of X100 Pipeline Steel in NS4 Solution
The X100 pipeline steel is classified as a type of high-strength, low-alloy steel that is mostly used in the construction of pipelines designed for...
-
In-situ tensile deformation of austenitic stainless steels with various grain sizes during synchrotron and neutron diffraction
In this study, we conducted in-situ tensile deformation tests using synchrotron X-ray and neutron diffraction techniques on Nb-bearing AISI 201...
-
The high-temperature oxidation behavior and mechanism in a powder metallurgy Ni-based superalloy featuring δ-Nb3Al addition
Incorporating strengthening phase with a higher thermal stability than traditional L 12 -ordered Ni 3 Al phase offers a promising avenue for develo**...
-
Enhancement of Microstructural and Tensile Isotropy for Ti–6Al–4V and Ti–6Al–2Sn–2Zr–2Mo–2Cr Alloys Deposited with Wire Arc Additive Manufacturing and Interlayer Peening
AbstractThe wire arc additive manufacturing (WAAM) deposition of Ti–6Al–4V (Ti64) and Ti–6Al–2Sn–2Zr–2Mo–2Cr (Ti62222) alloys produce long columnar...
-
Interfacial microstructure and electrochemical behavior of diffusion welded joints of Zr-Alloy and super duplex stainless steel
In this study, solid-state diffusion welded joints of zirconium alloy (Zr-Alloy) and super duplex stainless steel (SS) were prepared at 875 °C with...
-
Sensor degradation in nuclear reactor pressure vessels: the overlooked factor in remaining useful life prediction
Sensor degradation poses a critical yet ‘often overlooked’ challenge in accurately predicting the remaining useful life (RUL) of nuclear reactor...
-
Corrosion inhibition, long-term and adsorption mechanisms of humic acid on ADC12 aluminum alloy in oxalic acid solution
In order to inhibit the corrosion of ADC12 aluminum alloy caused oxalic acid in engine coolant, corrosion inhibitor technology is usually used...
-
Component gradually varied templates-derived carbons: effect of composition of template on their structure and supercapacitor performances
The composition and chemical properties of template could influence the morphology, texture and surface chemistry of the resultant carbon and their...
-
Effect of zinc phosphate pretreatment on micro-arc oxidation performance
The integration of micro-arc oxidation (MAO) film and chemical conversion (PCC) technology is a promising surface treatment for magnesium alloys. In...
-
Molecular modeling applied to corrosion inhibition: a critical review
In the last few years, organic corrosion inhibitors have been used as a green alternative to toxic inorganic compounds to prevent corrosion in...
-
Design of a Three-Layer Impactor for Material Strength Measurements at Multi-Megabar Pressures
Off-Hugoniot loading methods for dynamic compression have been a topic of interest for many years as a means of accessing high pressures without...
-
Enhanced α → β phase transition of Ti–6Al–2Zr–1Mo–1V alloy by the electropulsing
Both the electropulsing-assisted treatment (EPAT) and traditional heat treatment (THT) were conducted to investigate the effect of the electropulsing...
-
Editorial: The August 2024 cover paper
Graphical Abstract
-
Polyepitaxial grain matching to study the oxidation of uranium dioxide
Although the principal physical behaviour of a material is inherently connected to its fundamental crystal structure, the behaviours observed in the...
-
Comprehensive Study on the Microstructural Characterization and Strengthening Mechanism of (α + β) Based Ti-6Al-7Nb Alloy Processed Via Mechanical Alloying and Spark Plasma Sintering
This study investigates the severe plastic deformation of Ti–6Al–7Nb alloy synthesized through mechanical alloying (MA, 0–120 h) and subsequently...
-
DATACORTECH: artificial intelligence platform for the virtual screen of aluminum corrosion inhibitors
The machine learning framework reported herein can greatly accelerate the development of more effective and sustainable corrosion inhibitors for...
