Search
Search Results
-
-
Effect of nano-silica on mechanical properties and microstructure of high-volume ground granulated blast furnace slag cement paste
Incorporating ground granulated blast furnace slag (GBS) as a supplementary cementitious material in cementitious materials can reduce the cement...
-
Study on the Precipitation Strengthening Mechanism of Mg–10Zn–5Al–0.2Sc Alloy
The Mg–10Zn–5Al–0.2Sc (wt%) alloy was fabricated through gravity casting and subsequent heat treatment. The microstructure and precipitates of the...
-
Antibacterial sol-gel AgMnFe2O4 composite coatings added with degradable MgO
The AgMnFe 2 O 4 -MgO composite coatings with the Ag/(Mn+Fe) atomic ratio of 0, 0.3%, 1% and 3%, respectively were prepared by sol-gel method to improve...
-
Influence of sintering temperature on structural, electrical, dielectric, and magnetic properties of magnesium ferrite (MgFe2O4) ceramics prepared using powder derived via Sol-Gel auto-combustion
Polycrystalline magnesium ferrite (MgFe 2 O 4 ) ceramics were prepared using as-prepared MgFe 2 O 4 powder derived via sol-gel auto combustion method, and...
-
Comprehensive Study on the Microstructural Characterization and Strengthening Mechanism of (α + β) Based Ti-6Al-7Nb Alloy Processed Via Mechanical Alloying and Spark Plasma Sintering
This study investigates the severe plastic deformation of Ti–6Al–7Nb alloy synthesized through mechanical alloying (MA, 0–120 h) and subsequently...
-
Constructing three-dimensional hydrogen-bonding network and porous film from chitosan enables high-performance silicon@carbon anode
Anodes based on silicon@carbon (Si@C) composites are expected to be used in the next generation of commercial lithium-ion batteries due to their high...
-
Deep learning for electrolysis process anode effect prediction based on long short-term memory network and stacked denoising autoencoder
The anode effect is a common failure in the aluminium electrolysis industry. If the anode effect cannot be accurately predicted, it will cause...
-
Switchable p–n–p conduction and thermoelectric properties of selenium-doped tellurium crystal
Switchable conductivity in elementary semiconducting materials has a high potential for the design of diodes, transistors and energy conversion...
-
Programming an efficient technique for designing smart C-doped MIC with dual self-protection for information and high-energy
Constructing self-protected metastable intermolecular composites (MICs) enables the regulation of microstructures towards boosting controllable...
-
Effect of Electrolyte Composition on the Structure and Tribological Properties of Ceramic Coatings Obtained by Micro-Arc Oxidation
The paper is dedicated to studying the structural and mechanical properties of ceramic coatings obtained by micro-arc oxidation (MAO) using a...
-
Aqueous Black Seed (Nigella sativa L.) Extract-Mediated Corrosion Inhibition in Mild Steel Exposed to 3.5% NaCl: Effect of Temperature, pH, Time, and In Situ Analysis Using Atomic Force Microscopy
Atomic force microscopy (AFM)-based analysis on the corrosion inhibition properties of aqueous black seed extract for mild steel exposed to 3.5% NaCl...
-
Role of Grain Boundary Strength on Yielding Behavior and Uniaxial Tensile Properties in Ferritic Steels
The yield-point phenomenon in recrystallized ferritic steels is often associated with the dislocation multiplication mechanism, wherein the yield...
-
Additive manufacturing and mechanical analysis of multi-material polymer parts combining thermosets and thermoplastics
Multi-material additive manufacturing (AM) represents one of the most promising solutions to target the contemporary demand for complex products with...
-
Comparative analysis of the effect of magnesium and zinc on the structure and mechanical properties of hot-rolled and cold-rolled alloy Al–2%Cu–1.5%Mn sheets
In this study, using an example of cold-rolled sheets, the separate effect of magnesium and zinc in an amount up to 2% upon the structure and...
-
Growth Kinetics and Development of the Solid–Liquid Interface in Low-Carbon and High-Alloy Steel Castings Enabled by Confocal Microscopy
High-Temperature Laser Scanning Confocal Microscopy (HT-LSCM) is an in situ technique that can be used for direct observation of the microstructure...
-
Refinement Mechanism of the Hypoeutectic Al–7Si Alloy by Adding a Novel La-Rich Rare-Earth Grain Refiner
Refining the grain size of the as-casted hypoeutectic Al–Si alloys is an established technique for improving their mechanical properties. This work...
-
Life cycle assessment of aerogels: a critical review
Over the past decade, the increasing emphasis on sustainable material production has brought aerogel technology to the forefront of scientific and...
-
-
Effect of Ag on High-Temperature Oxidation Behavior of Mg–6.5Gd–5.6Y–0.1Nd–0.01Ce–0.4Zr Alloy
In this paper, the isothermal oxidation experiments were used to study the effect of Ag on the high-temperature oxidation behavior of...