Search

Search Results

1. Role of Bi/Te co-dopants on the thermoelectric properties of SnSe polycrystals: an experimental and theoretical investigation

   A sustainable solution to the energy crisis may be found in thermoelectric materials and generators, capable of transforming thermal energy into...

   Manasa R. Shankar, A. N. Prabhu, ... Vikash Mishra in Journal of Materials Science

   Article Open access 14 July 2024
   

2. Characteristics and Formation Mechanism of Ca–Mg–Al–Si–O + (Ca,Mn)S Duplex Inclusions in Ca–S Free-Cutting Steel

   Large numbers of long strip-shaped pure MnS inclusions in steel will result in anisotropy of mechanical properties. To obtain more duplex (Ca,Mn)S...

   Yao Li, Guoguang Cheng, ... Hu Long in Metals and Materials International

   Article 13 July 2024
   

3. Strain Hardening in Dilute Binary Al–Cu, Al–Zn, and Al–Mn Alloys: Experiment and Modeling

   During thermo-mechanical processing, dissolved alloying elements have a huge impact on the microstructure evolution by influencing the overall...

   Bernhard Viernstein, Laszlo Solyom, Ernst Kozeschnik in Metallurgical and Materials Transactions A

   Article Open access 13 July 2024
   

4. Study on Stress Corrosion Cracking of X100 Pipeline Steel in NS4 Solution

   The X100 pipeline steel is classified as a type of high-strength, low-alloy steel that is mostly used in the construction of pipelines designed for...

   Alex Adonis Nking’wa, Kewei Gao in Journal of Failure Analysis and Prevention

   Article 13 July 2024
   

5. In-situ tensile deformation of austenitic stainless steels with various grain sizes during synchrotron and neutron diffraction

   In this study, we conducted in-situ tensile deformation tests using synchrotron X-ray and neutron diffraction techniques on Nb-bearing AISI 201...

   Ahmad Kermanpur, Steven Van Petegem, Nicola Casati in Journal of Materials Science

   Article 13 July 2024
   

6. Correlation Between Elastic Properties and Phase Transformation of Zr₅₀Pd_50−xRu_x High-Temperature Shape Memory Alloys Designed by DFT

   The effect of Ru addition on the martensitic transformation and mechanical properties of Zr ₅₀ Pd _{50− x} Ru _x SMAs shape memory alloys has been studied....

   Yu-Nien Shen, D. Nkomo, ... Y. Yamabe-Mitarai in Metallurgical and Materials Transactions A

   Article Open access 13 July 2024
   

7. The high-temperature oxidation behavior and mechanism in a powder metallurgy Ni-based superalloy featuring δ-Nb₃Al addition

   Incorporating strengthening phase with a higher thermal stability than traditional L ₁₂ -ordered Ni ₃ Al phase offers a promising avenue for develo**...

   **ao Liu, Guowei Wang, ... Lei Zheng in Journal of Materials Science

   Article 13 July 2024
   

8. Enhancement of Microstructural and Tensile Isotropy for Ti–6Al–4V and Ti–6Al–2Sn–2Zr–2Mo–2Cr Alloys Deposited with Wire Arc Additive Manufacturing and Interlayer Peening

   Abstract

   The wire arc additive manufacturing (WAAM) deposition of Ti–6Al–4V (Ti64) and Ti–6Al–2Sn–2Zr–2Mo–2Cr (Ti62222) alloys produce long columnar...

   Sungwon Hwang, Guo **an, ... Namhyun Kang in Metals and Materials International

   Article 13 July 2024
   

9. Interfacial microstructure and electrochemical behavior of diffusion welded joints of Zr-Alloy and super duplex stainless steel

   In this study, solid-state diffusion welded joints of zirconium alloy (Zr-Alloy) and super duplex stainless steel (SS) were prepared at 875 °C with...

   Avinash Kumar, Arindam Dhar, ... Sukumar Kundu in Welding in the World

   Article 13 July 2024
   

10. Correction: Impact of Co on Thermal Aging in Sn58Bi/Cu Solder Joints: IMC Growth and Transformation in Mechanical Properties

    ** Huang, Liang Zhang, ... Lei Sun in Metals and Materials International

    Article 13 July 2024

11. Retraction Note: Porous ceramics based on diatomite: Mechanical properties and evolution of morphology after deformation

    Arkadiy A. Skvortsov, Mikhail N. Luk’yanov, ... Anna A. Skvortsova in Journal of Electroceramics

    Article 13 July 2024

12. Understanding the Stress-Induced Movement of \(\gamma /\epsilon \) Interfaces and Coalescence of \(\epsilon \) Martensite Variants Through Fractal Analysis

    Arpan Das in Metallurgical and Materials Transactions A

    Article Open access 13 July 2024
    

13. A Random Pore Model Approach Towards Hematite to Iron Reduction by Carbon Monoxide: A Computational and Experimental Study

    Abstract

    In this work, the random pore model (RPM) is utilized for the kinetic study of hematite reduction to Iron with CO. This can significantly...

    Masoud Khani, Habib Ale Ebrahim, Sajjad Habibzadeh in Metallurgical and Materials Transactions B

    Article 12 July 2024
    

14. Sensor degradation in nuclear reactor pressure vessels: the overlooked factor in remaining useful life prediction

    Sensor degradation poses a critical yet ‘often overlooked’ challenge in accurately predicting the remaining useful life (RUL) of nuclear reactor...

    Raisa Bentay Hossain, Kazuma Kobayashi, Syed Bahauddin Alam in npj Materials Degradation

    Article Open access 12 July 2024
    

15. Corrosion inhibition, long-term and adsorption mechanisms of humic acid on ADC12 aluminum alloy in oxalic acid solution

    In order to inhibit the corrosion of ADC12 aluminum alloy caused oxalic acid in engine coolant, corrosion inhibitor technology is usually used...

    Sudan Liu, Hualiang Huang, **bei He in Journal of Materials Science

    Article 12 July 2024
    

16. Twist angle-dependent transport properties of twisted bilayer graphene

    Twisted bilayer graphene (tBLG) with small twist angles has attracted significant attention because of its unique electronic properties arising from...

    ** Hong Kim, Seoung-Hun Kang, ... ** Sik Choi in NPG Asia Materials

    Article Open access 12 July 2024
    

17. Comparative Analysis of Fixed-Grid Methods in Addressing a Benchmark Problem Coupled Natural Convection and Melting

    For decades, the fixed-grid method (FGM) has undergone extensive development and widespread application in addressing phase change problems....

    Jibai Kang, Weiling Wang, ... Miaoyong Zhu in Metallurgical and Materials Transactions B

    Article 12 July 2024
    

18. Component gradually varied templates-derived carbons: effect of composition of template on their structure and supercapacitor performances

    The composition and chemical properties of template could influence the morphology, texture and surface chemistry of the resultant carbon and their...

    Jianghui Cheng, Shihui Yu, ... Mingjiang **e in Journal of Materials Science

    Article 12 July 2024
    

19. Effect of zinc phosphate pretreatment on micro-arc oxidation performance

    The integration of micro-arc oxidation (MAO) film and chemical conversion (PCC) technology is a promising surface treatment for magnesium alloys. In...

    Zijie Shao, Wei He, ... Fei Chen in Journal of Materials Science

    Article 12 July 2024
    

20. Molecular modeling applied to corrosion inhibition: a critical review

    In the last few years, organic corrosion inhibitors have been used as a green alternative to toxic inorganic compounds to prevent corrosion in...

    José María Castillo-Robles, Ernane de Freitas Martins, ... Ivan Cole in npj Materials Degradation

    Article Open access 12 July 2024