Search
Search Results
-
Regulation of Ti(C,N) deposition on hot surface of refractory in blast furnace hearth
Ti(C,N) concentration was found to be lower on the hearth sidewall of a blast furnace and increased gradually toward the bottom of the blast furnace....
-
Effect of La2O3 additions on microstructure and mechanical properties of Ti (C,N)-WC-Mo2C-Ni-Co cermets
Rare earth elements were considered alternative additives beneficial to the TiCN based cermets, but their effect with high content Mo 2 C has not been...
-
Cutting parameters optimization and cutting performance of Ti(C,N)-based cermets by reactive hot-pressing from Co–Ti–C–BN system in dry turning austenitic stainless steels
The Ti(C,N)–TiB 2 –Co cermet tool was developed using reactive hot pressing sintering technology. The orthogonal test method was used to study the...
-
Influence of aging treatment on mechanical properties and wear resistance of medium manganese steel reinforced with Ti(C,N) particles
In this study, the hot rolled medium manganese steel containing titanium was solution treated at 1,000 °C and followed by aging treatment at 500,...
-
Microstructure and mechanical properties of Ti/Al/Ti clad plates prepared via powder-in-tube method
The Ti/Al/Ti clad plates exhibit a broad spectrum of potential applications. However, the conventional techniques of hot-pressing composite and...
-
Improving flexural strength of Ti2C-Ti cermet by hot compressive deformation: Microstructure evolution and fracture behaviors
In order to improve the microstructure and mechanical properties, the hot compressive deformation with 50% height reduction at 1100·C was conducted...
-
Mechanism and growth kinetics of Al3Ti phase in fifteen-layered Ti Gr.1/A1050 clads produced with the explosive welding technique
This study was dedicated to the detailed characterization of the microstructural changes and the phase analysis of the interfaces formed in explosive...
-
Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmosphere
Si 3 N 4 –TiN–SiC composites were prepared by partial substitution of the Ti–Si–Fe alloy extracted from high-titanium blast furnace slag for Si under...
-
Synthesis of the (Ti,Cr)xCy carbides on CFs reinforced Cr and Ti-based alloy obtained by direct energy deposition
A new alloy Ti6Al4V/CrCFs synthesized from powder mixture Ti6Al4V and carbon fibers (CFs) coated of chromium (Cr) during direct energy deposition...
-
Open-ti: open traffic intelligence with augmented language model
Transportation has greatly benefited the cities’ development in the modern civilization process. Intelligent transportation, leveraging advanced...
-
Nanostructured Ti Grade 2 for Biomedical Applications: Evaluation of Cellular Interaction
Tissue engineering has as one of its objectives the development of biocompatible materials, capable of interacting with biological tissues, promoting... -
2T1M Neuromorphic Synapse with Pt-Hf-Ti Memristor Model
Neuromorphic computing systems are the future of the technological revolution due to their containment of multiple processing layers, low energy... -
Facile Fabrication of Magnetic C-TiO2NBS/g-C3N4/Fe3O4 Composites and the Photocatalytic Performance Under Simulated Sunlight Irradiation
A multicomponent catalyst C-TiO 2 NBs/g-C 3 N 4 /Fe 3 O 4 was successfully prepared by a mild-step hydrothermal method at room temperature and atmospheric...
-
Fatigue properties of binary Ti-Ta metal-metal composite with lamellar microstructure
Binary metal-metal composites are promising for advanced applications. In general, the interface between adjacent metals may have a great influence...
-
Densification, microstructure, and nanomechanical evaluation of pulsed electric sintered zirconia-silicon nitride reinforced Ti-6Al-4 V alloy
In this study, the influence of silicon nitride (Si 3 N 4 ) and zirconia (ZrO 2 ) ceramics was examined on the titanium alloy using the pulsed electric...
-
Failure Mechanism on Ti-6Al-4V Material Processed Using Selective Laser Melting (SLM)
Titanium alloy has been massively used in automotive and aerospace fields, such as Ti-6Al-4V titanium alloy. Further, the emergence of metallic... -
How to suppress the Kirkendall porosity within the Ti/Ni explosive welds?
Pure Ti (Grade 1) and Ni (type Ni201) were used to produce the Ti/Ni welds employing the explosive welding process. Thermal expansion of the welded...
-
An Image Processing Approach for Morphology Characterization of Serration in Ti-6Al-7Nb Chip Sliding Surface
Titanium alloys, namely Ti-6Al-7Nb, have found growing importance in biomedical industry applications. CNC machining plays a decisive role in the... -
Decade Milestone Advancement of Defect-Engineered g-C3N4 for Solar Catalytic Applications
Over the past decade, graphitic carbon nitride (g-C 3 N 4 ) has emerged as a universal photocatalyst toward various sustainable carbo-neutral...
-
Synthesis of TiO2/g-C3N4 Photocatalyst with Recovered TiO2 from Spent SCR Catalyst for Photodegrading Rhodamine B
PurposeTiO 2 recovered from spent SCR catalyst, a hazardous industrial solid waste, was modified by g-C 3 N 4 to produce the recovered TiO 2 (R-TiO 2 )/g-C 3 N...