Search
Search Results
-
CFD Simulation of CO2 Through a Converging–Diverging Nozzle
In the process of CO2 separation from natural gas, research has been done by various parties. Even though they were successful to a certain extent, a...
-
Development and Analysis of Design Trends for Supercritical \({\mathrm{{CO}}_{2}}\) Radial Inflow Turbine Nozzle Guide Vanes
Radial inflow turbines (RITs) play a vital role in power generation due to their small size, compact construction and large power density, especially...
-
The Effect of Vane Number in Casing Treatment of an Axial-Flow Compressor
Improvement of the operating range of compressors will help the power and energy plant to work more flexibly to integrate with other energy...
-
An Investigation into the Technical Feasibility of Incorporating Wind Energy for Electric Vehicle Charging Systems
The primary objective of this research project was to investigate the potential application of wind energy as a solution for reducing charging time...
-
An approach to evaluating the impact of contaminants on flux deposition in gas turbines
Gas turbines are a key part of many countries’ power generation portfolios, but components such as blades can suffer from hot corrosion attack, which...
-
Introduction
This chapter intends to introduce terminologies and symbols that will be used to design Francis turbine in later chapters. General terms and the...
-
Multi-objective Optimisation for Supercritical CO \(_2\) Radial Inflow Turbine Stator
During the operation of supercritical CO \(_2\) (sCO...
-
Development of Corrosion and Heat-Resistant Nickel Alloys and their Production Technology with the Aim of Import Substitution
Alloys VZhL738, VZhL792 and VZhL939 developed FSUE VIAM for casting large rotor blades and nozzle vanes for medium and high power from 25 to 280 MW...
-
Operation Experience of the Single-Shaft CCPP 400 MW of Shatura Power Station
The description of the equipment of the combined-cycle power plant CCPP-400, operated at the Shatura power station, is given. The thermal...
-
Variable Geometry Industrial Gas Turbine Part-Load Performance
This paper provides an investigation on the effect of variable inlet guide vane and physical faults on the performance of a three-shaft gas turbine...
-
Introduction
Current world, the large amount of consumption of fossil energy leads to global warming, energy crisis, ocean pollution, and many other environmental...
-
Effect of Inner/Outer Secondary Air Mass Flow Rate on the Airflow Characteristics of the 14-MW Double Cone Burner
The double cone burner is the only coal-fired burner in China that utilizes a annular reverse structure and has been industrialized. Cold airflow...
-
Effects of Gas Condition and Baffle Installation on Bed Hydrodynamics in FCC Regenerators
Gas mal-distribution is a critical industrial challenge that often mars homogenous gas distribution in the cross-section of the regenerator component...
-
Change in Efficiency of Flow Path of Modernized and Non-Modernized Turbines Having a Capacity of 300 MW During Operation
The results of changes in the thermal efficiency of high-pressure cylinders (HPC) of active and reactive types, as well as intermediate-pressure...
-
Conclusions and Future Work
This book aims to develop the design and simulation tools for supercritical CO \(_2\)...
-
Aspects of the Capacity-Enhancing Modernization of F-Series Gas Turbine Plants and the Characteristics of Single-Shaft Combined-Cycle Gas Plant
The increase in the efficiency of powerful gas turbine plants (GTPs) is primarily necessitated by the economic feasibility of increasing installed...
-
Experimental Investigation of Cooling Photovoltaic Panel Using Turbo-Ventilator
Solar panels are devices which is used to convert solar energy into electric power. The design of solar panels allows them to soak up as much...
-
The Primary Circuit
The PWRs primary circuit (Photo 3.1 and Fig. 3.1) is designed to circulate the liquid water that cools a pressurized water reactor. Its essential...
-
Numerical Simulation on Pulverized Coal Combustion Chamber with Air Cooling
To investigate the relationship between the temperature distribution in the air-cooled combustor, flame shape and gas distribution ratio, 3D modeling...
-
CFD Analysis of Temperature Profile and Pattern Factor at the Exit of Swirl Dump Combustor
The practical challenge in analysis within the field of turbine combustion primarily centers on a clean emission, an occasional liner wall...