Search
Search Results
-
Effect of Silicon Carbide Content on Bulk Electrical Resistance of Free-Sintered AlN–SiC Composites
Abstract —It is reported that the bulk electrical resistance of AlN–SiC composites decreases from 1.1 × 10 8 до 3.0 × 10 2 Ω cm when the content of...
-
Polyamide 6 (PA6)/carbon nanotubes (MWCNT) nanocomposites for antistatic application: tailoring mechanical and electrical properties for electronic product protection
Antistatic packaging has gained great importance for protecting sensitive electronic devices against static charges. In this work, polyamide 6...
-
Synergetic enhancement of the electrical-thermal-mechanical properties of EPDM composites modified by Kaolin and BNNSs
Offshore wind power is clean energy with rapid growth in recent years. As a key part of wind turbines, improving the combination performance of wind...
-
Mechanical and Electrical Properties of Milled Carbon Fiber Reinforced Artificial Graphite Scrap Composites with Phenol Resin as the Binder
In the present study, the effect of adding milled carbon fibers (MCFs) to isotropic bulk graphite made using artificial graphite scrap was compared...
-
On the Structural, Thermal, Electrical and Mechanical Properties of Compacted Bentonite Material
In the present work, we report the mechanical, thermal, and electrical behavior of a pure Moroccan bentonite clay as well as compacted sand (S),...
-
Electrical properties of polyaniline (PANI)-porous silicon (PS) heterostructure
The present work reports fabrication of polyaniline (PANI)-porous silicon (PS) heterostructure obtained by PANI coating on PS using vacuum coating...
-
Influence of thermal conducting inclusions on the limiting potential difference of polymer composite electrical insulation
An electrical insulation made as a hollow circular cylinder with unlimited length is considered under a constant difference of electric potentials on...
-
Tunable Electrical Resistivity of Carbon Nanotube Filled Phase Change Material Via Solid-solid Phase Transitions
Thermo-responsive materials can be used in temperature sensing systems. In this study, we demonstrated a carbon nanotube (CNT) incorporated...
-
Structural and electrical properties of cross-linked blends of Xanthan gum and polyvinylpyrrolidone-based solid polymer electrolyte
Research based on solid polymer electrolytes (SPEs) has been improved extensively over the past few decades owing to their abundance in nature,...
-
Effect of ionic liquid on graphene decorated with copper nanostructure dispersion towards silicon/graphene/copper composites with enhanced thermal, electrical and antimicrobial properties
Graphene decorated with cooper nanostructures were prepared with and without ionic liquid (IL) using different milling times. The obtained samples...
-
Dielectric Properties and Corona Resistance of Si–Mg–B/EP Nano-composites
In order to meet the increasing requirements of epoxy resin matrix materials for the electrical and electronics industry, this paper presents the...
-
LiFePO4/C composites with high compaction density as cathode materials for lithium-ion batteries with high volumetric energy density
To further improve the volumetric energy density of LiFePO 4 based cathode materials, herein, lithium iron phosphate supported on carbon (LiFePO 4 /C)...
-
Lattice Boltzmann method’s ability to calculate entropy during MHD non-Newtonian ferrofluid-free convection under volumetric radiation and heat generation/absorption
The capability of LBM in the determination of entropy during power-law ferrofluid-free convection in the presence of effective factors is depicted in...
-
A Study of the Thermal Conductivity, Electrical Resistivity, and Microwave Absorption of Pressureless Sintered AlN–Y2O3–Mo and AlN–Y2O3–TiN Composites
AbstractCompositions of AlN–Y 2 O 3 –Mo and AlN–Y 2 O 3 –TiN composite materials with high thermal conductivity have been selected for bulk absorbers of...
-
Study of Climatic Stability of Polyethylene Based Electrically Conductive Materials for Fuel Canisters in Conditions of the North and Arctic
AbstractField exposure of polyethylene electrically conductive materials that are intended for the production of reusable containers, in which fuel...
-
Nanoarchitectonics of Niobium-Doped, Lead-Free BLT (Ba0.97La0.02Ti0.98Nb0.016O3) for Electrical Properties with Unusual d.c Bias Voltage Independence
Polycrystalline sample of Ba 0.97 La 0.02 Ti 0.98 Nb 0.016 O 3 (distinguished as BLTi 0.98 Nb 0.016 ) has been prepared through Molten-Salt-Flux reaction route....
-
Properties and Functionality of VK-100 Conductive Adhesive
AbstractBased on the results of the research, a conductive adhesive of the VK-100 grade has been developed based on a mixture of epoxy oligomers and...
-
Effect of pore generator on microstructure and resistivity of Sb2O3 and CuO doped SnO2 electrodes
Sb 2 O 3 and CuO doped SnO 2 ceramic electrodes could be an alternative to the ones currently used ones in the electrooxidation process of water...
-
Fractal characterization of electrical conductivity and mechanical properties of copper particulate polyester matrix composites using image processing
In this study, the electrical conductivity and the mechanical properties of the dendritic-shaped copper powder-filled unsaturated polyester resin...
-
Effects of nanocrystalline calcium oxide particles on mechanical, thermal, and electrical properties of EPDM rubber
In this research, the effect of calcium oxide (CaO) nanocrystalline particles filled ethylene propylene diene monomer (EPDM) rubber composites is...