![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Optimizing magnetoelastic properties by machine learning and high-throughput micromagnetic simulation
Magnetoelastic couplings in giant magnetostrictive materials (GMMs) attract significant interests due to their extensive applications in the fields of spintronics and energy harvesting devices. Understanding t...
-
Article
Low-pressure-induced large barocaloric effect in MnAs0.94Sb0.06 alloy around room temperature
压热制冷由于其环保以及高效等优点被认为是很有可能替代传统气体压缩制冷的制冷方式。然而,目前所发现的大部分压热制冷材料的驱动压力都很大,不利于实际应用。在这篇文章中,我们报道了一级磁结构相变合金MnAs0.94Sb0.06在低压力下诱导的压热效应。MnAs0.94Sb0.06合金的相变温度对压力非常敏感,其压力系数dTc/dP在降温时为134 K·GPa-1,在升温时为126 K·GPa-1。在40 MPa的微小压力下,M...
-
Article
Tailoring coercive field in rare earth giant magnetostrictive materials by α-Fe precipitation
Rare earth giant magnetostrictive materials (GMMs) Tb1−xDyxFe2±δ (Tb–Dy–Fe) have been successfully employed in many microelectromechanical devices due to their excellent magnetostrictive properties at room temper...
-
Article
Performance of rice-hull-PE composite exposed to natural weathering
Rice-hull powder is widely used in manufacturing reinforced plastic composites. However, its weathering ability is rarely considered. We studied the performance of two types of rice-hull-polyethylene (RH-PE) c...
-
Article
Property changes of wood-fiber/HDPE composites colored by iron oxide pigments after accelerated UV weathering
Four kinds of iron oxide pigments were added into wood-fiber/high-density-polyethylene composites (WF/HDPE) at three different concentrations, to determine the effects of pigments on the changes in the color a...
-
Article
Structure and magnetic properties of Fe1−x C x , solid solution prepared by mechanical alloying
Supersaturated solid solutions Fe1−x C x (0⩽x⩽0.9) of wide composition range have been prepared by mechanical alloying process. Nanocrystalline phase was ...
-
Article
Preparing Fe5C2 intermetallic compound by mechanical alloying method at room temperature and normal pressure
Single phase Fe5C2 intermetallic compound was prepared by mechanical alloying method. The phase and crystal structure of sample were analyzed with X-ray differaction spectrum. The decomposing temperature of the F...
-
Article
Structure and magnetic property of amorphous Fe-Ni particles prepared by mechanical alloying
The amorphous Fe67.5Ni32.5 alloy particles have been prepared by mechanical alloying (MA) process of elemental powders. The crystallization is observed at temperature around 405°C by means of differential thermal...
-
Article
The magnetic properties and effective magnetic anisotropy of Fe-Ni ultrafine particles
Fe100−x Ni x alloys of ultrafine particle with the average grain size of about 10 nm were synthesized by mechanically alloying process. The samples were investig...
-
Article
Magnetic anisotropy of mechanically alloyed Fe25Ni75 nanocrystallites
The magnetic anisotropy of Fe25Ni75 nanocrystallites in the range of 10∼20 nm was measured by the law of approach to saturation. The samples were prepared by mechanical alloying process, and the average crystal s...