48 Result(s)
within
Zheng** Jiang
Characterization and Evaluation of Materials
-
Article
Effect of Annealing Temperature on the Microstructure, Mechanical Properties and Fracture Behavior of AISI 304 Foils
In the current work, the effect of annealing temperature on the microstructure, mechanical behavior and fracture mechanism of AISI 304 foils were analyzed by a series of electron back-scatter diffraction tests...
-
Article
A Study on the Microstructural Evolution, Interfacial Diffusion and Mechanical Properties of Ultra-thin Stainless Steel–Copper Composites Fabricated by Roll Bonding
Systematic study on the microstructural evolution, interfacial diffusion and mechanical properties of ultra-thin stainless steel–copper composites (50 µm) after annealing treatment was conducted in the present...
-
Article
Design of a robust LMI-based H∞ observer for the state of charge estimation in lithium-ion batteries
Designing a robust Hꝏ observer to estimate the state of charge (SoC) of lithium batteries for various applications, including microgrids, is the principal goal of the present article. Battery dynamic models al...
-
Article
HAZ Effects in Hot-Rolled Dual-Phase Steel During Flash Butt Welding of Wheel Rims
The embrittlement and softening behavior in simulated heat-affected zones (HAZ) of a newly designed dual-phase DP680 steel for wheel rim applications with different flash allowances were investigated to determ...
-
Article
Investigation of the Annealing Effects on Mechanical Properties and Interfacial Characteristic of TA1/Al5083 Bimetal Composite
The influence of annealing treatment on the mechanical properties and interfacial characteristics of a TA1/Al5083 bimetal composite was investigated in this research. The bimetal composite plates were prepared...
-
Article
Numerical Simulation of the Interaction Between Arc Plasma and Molten Slag in Electric Arc Furnace for High-Titania Slag Smelting
The heat of arc plasma is the primary energy source of the electric arc furnace (EAF) for high-titania slag smelting. A unified model of fluid flow, heat transfer, and arc-slag interaction is developed by taki...
-
Article
Microstructure-Based Modelling of Elastoplastic Properties and Deformation Characteristics of Advanced High Strength Dual-Phase Steel
The 3D representative volume element modelling concerning different microstructural features and renowned work hardening models was developed in this study. Simulation results of stress–strain relationship bas...
-
Article
Correction: Effect of indentation rate on deformation behavior and mechanical properties of FeO/Fe is simulated based on molecular dynamics
-
Article
Effects of refining methods and time on suspension, microstructure, and electrical properties of ZnO varistors
The effects of the refining methods including roller ball milling, the vertical stirring milling, and high-pressure micro jet homogenization on the suspension, the microstructure, and the electrical properties...
-
Article
Effect of indentation rate on deformation behavior and mechanical properties of FeO/Fe is simulated based on molecular dynamics
The FeO/Fe bond in the oxide scale is very tight, and FeO fracture is complicated under external force. In this study, the deformation behavior and mechanical properties of single-crystal FeO/Fe under nanoinde...
-
Article
The Wet–Dry Cycling Corrosion Behavior of Low-Carbon Medium Manganese Steel Exposed to a 3.5% NaCl Solution Environment
This work utilizes wet–dry cycle corrosion tests to investigate the corrosion behavior of medium manganese steel by analyzing its corrosion kinetics, corrosion phases, surface morphology, cross-section morphol...
-
Article
The Effect of Hysteresis Loss on Magnetic Entropy Change in Highly Textured Mn-Ni–Sn Melt-Spun Ribbons
Highly textured Heusler alloy Mn44.7Ni43.5Sn11.8 ribbons were prepared by melt spinning. The magnetocaloric properties were evaluated by the direction of the magnetic field along the ribbon surface and perpendicu...
-
Article
Effects of strain rate on the microstructure and texture evolution of a TRIP-TWIP metastable austenitic stainless steel during bending
Microstructure evolution, deformation-induced martensitic transformation and texture evolution were investigated in a metastable austenitic stainless steel during bending under various strain rates ranging from έ
-
Article
Comparisons of the Microstructure and Magnetic Properties of Anisotropic NdFeB Magnets Prepared by Hot Pressing and Spark Plasma Sintering
NdFeB hot-pressed and hot-deformed magnets were prepared by hot-pressed (HP) sintering and spark plasma sintering (SPS). The effects of sintering mechanisms of SPS and HP on the microstructure of hot deformati...
-
Article
Multiscale Interface Stress Characterisation in Cold Rolling
This paper provides a comprehensive review on the multiscale characterisation of interface stresses in cold rolling considering both the random asperity deformation and lubrication. The characterisation of the...
-
Article
Effect of Lüders Bands by Strain Ageing on Strain Distribution, Microstructure and Texture Evolution of High-Strength Pipe Steel
In this study, the high-strength pipe steel, i.e. X80, was heated at 260 °C for half an hour followed by air cooling for thermal simulation of pipe coating process. During the uniaxial loading of the specified...
-
Article
Uneven Evolution of Microstructure, Magnetic Properties and Coercivity Mechanism of Mo-Substituted Nd–Ce–Fe–B Alloys
The purpose of this paper is to study the influence of Mo addition on the phase morphologies, microstructures and magnetic properties of the designated alloys. It is found out that the coercivity Hcj increases un...
-
Article
Microstructure and texture evolution of cold-rolled low-Ni Cr–Mn–N austenitic stainless steel during bending
Microstructure and texture evolution of a low-Ni Cr–Mn–N austenitic stainless steel were analysed during three-point bending process. The electron back-scattering diffraction (EBSD) was used to characterise th...
-
Article
Influence of Zn Content on Microstructures, Mechanical Properties and Stress Corrosion Behavior of AA5083 Aluminum Alloy
To enhance the stress corrosion cracking (SCC) resistance, Zn was utilized as an alloy element to add in the AA5083 aluminum alloys. The effects of Zn content on the microstructures, mechanical properties and ...
-
Article
The Application of Ion Mobility-Mass Spectrometry in Untargeted Metabolomics: from Separation to Identification
Untargeted metabolomics aims to comprehensively profile metabolites as many as possible in biological samples. Recently, ion mobility-mass spectrometry (IM-MS) has emerged as a powerful technology for untarget...
