Skip to main content

and
  1. No Access

    Article

    Transesterification of Shea (Karite) and Palm Oils in Supercritical Ethanol

    The biodiesel fuel synthesis process is implemented in a batch plant by the transesterification of shea (Karite) and palm oils in an ethanol medium under supercritical fluid conditions in the temperature range...

    S. V. Mazanov, Zh.-M. Kouagou, D. D. Hounkpatin in Russian Journal of Physical Chemistry B (2022)

  2. No Access

    Article

    Radicals in Cellular Structures

    The involvement of natural radicals in single-electron processes of cell activity is considered. It was shown that coenzymes that have intermediate free radical quinoid and semichinoid forms can interact with ...

    Yu. A. Shapovalov, P. P. Gladyshev, S. T. Tuleukhanov, E. V. Shvetsova in Biophysics (2020)

  3. No Access

    Article

    Structural changes in Bi-43 wt % Sn eutectic alloy under superplastic deformation

    Methods of scanning electron microscopy have been used to study the microstructure of superplastically deformed samples of eutectic alloy Bi-43 wt % Sn. The observed specific features of the deformation relief...

    V. F. Korshak, Yu. A. Shapovalov, O. Prymak in The Physics of Metals and Metallography (2015)

  4. No Access

    Article

    Peculiarities of the volume ratio of α and β phases in the superplastic eutectic Bi-43 wt % Sn Alloy

    This work deals with the study of the volume ratio of α(Sn) and β(Bi) phases in the as-cast eutectic Bi-43 wt % Sn alloy, as well as in this alloy after casting, followed by compression in a hydraulic press to...

    V. F. Korshak, P. V. Mateychenko in The Physics of Metals and Metallography (2014)

  5. No Access

    Article

    X-ray diffraction study of structural and phase states of a superplastic Sn-38 wt % Pb alloy and their variations under the effect of external mechanical stresses and aging

    Structural and phase states of the eutectic alloy Sn-38 wt % Pb, which exhibits superplastic properties at room temperature, have been studied using samples that were cast, forged in a hydraulic press to ∼73%,...

    V. F. Korshak, Yu. A. Shapovalov, A. L. Samsonik in The Physics of Metals and Metallography (2012)

  6. No Access

    Article

    Changes in the structural phase state and elastic and inelastic properties of superplastic eutectic Sn-38% wt Pb alloy during the aging process

    We investigate how the dynamic Young’s modulus E and decrement δ change due to the compression and natural aging of eutectic Sn-38% wt Pb alloy, which exhibits superplastic properties at room temperature. We also...

    V. F. Korshak, Yu. A. Shapovalov in Bulletin of the Russian Academy of Science… (2011)

  7. No Access

    Article

    Phase state of a Bi-43 wt % Sn superplastic alloy and its changes under the effect of external mechanical stresses and aging

    Samples of a Bi-43 wt % Sn superplastic alloy have been studied by X-ray diffraction in the ascast state, after compression of as-cast samples to ∼70% on a hydraulic press, after aging in the as-cast and preli...

    V. F. Korshak, R. A. Chushkina in The Physics of Metals and Metallography (2011)

  8. No Access

    Article

    Hydrodynamic flow of the eutectic under the conditions of superplasticity

    In this paper we present original experimental data indicating the manifestation of a hydrodynamic mode of deformation under the conditions of superplasticity. The investigations have been performed on a cast ...

    V. F. Korshak, A. P. Kryshtal’ in The Physics of Metals and Metallography (2010)

  9. No Access

    Article

    Some aspects of superplastic flow of eutectic alloys connected with metastability

    Some features of the manifestation of superplastic properties in the Pb-62% Sn alloy have been investigated depending on the duration of aging after preliminary reduction. Mechanical tests have been conducted ...

    V. F. Korshak, Yu. A. Shapovalov in The Physics of Metals and Metallography (2009)

  10. No Access

    Article

    Minimax optimal placement problem for special-form objects on a multiply connected domain

    An optimal placement problem for special-form objects on a multiply connected domain is considered. The objects must be disjoint and belong to a convex region that contains forbidden areas. The performance cri...

    S. I. Yaremchuk, Yu. A. Shapovalov in Cybernetics and Systems Analysis (2007)