Skip to main content

and
  1. Article

    Open Access

    Finite element analysis on dynamic behavior of sheet pile quay wall dredged and improved seaside subsoil using cement deep mixing

    Sheet pile wall structures are commonly applied in coastal projects, particularly for the quay wall. This structural type normally is used in places where the ground has a low bearing capacity and is easily pe...

    Anh-Dan Nguyen, Viet-Thanh Nguyen in International Journal of Geo-Engineering (2023)

  2. Article

    Open Access

    Evaluation of erosion characteristics of soils using the pinhole test

    This paper investigates the erosion characteristics of soils using the pinhole test. The tests were conducted with two undisturbed clay samples and five disturbed sandy soil samples. Based on the pinhole test ...

    Ba Huu Dinh, Anh-Dan Nguyen, Seo-Yong Jang in International Journal of Geo-Engineering (2021)

  3. Article

    Open Access

    Numerical analysis of static behavior of caisson-type quay wall deepened by grouting rubble-mound

    Caisson type gravity quay wall is a common structure used in the coastal regions. However, many of the existing quay walls constructed in the past are becoming obsolete. Therefore, the main goal of this study ...

    Anh-Dan Nguyen, Young-Sang Kim, Gyeong-O Kang in International Journal of Geo-Engineering (2021)

  4. No Access

    Chapter and Conference Paper

    Soil Stabilization by Using Alkaline-Activated Ground Bottom Ash Coupled with Red Mud

    This study evaluates the feasibility of incorporating bottom ash and red mud into a binder to stabilize soil. In this study, the bottom ash collected from Honam Thermal Power Plant in South Korea was ground t...

    My Quoc Dang, Young-sang Kim, Tan Manh Do in Proceedings of the 4th Congrès Internation… (2018)

  5. No Access

    Chapter and Conference Paper

    Thermal Conductivity of Controlled Low Strength Material (CLSM) Made with Excavated Soil and Coal Ash

    This paper focused on the quantitative evaluation of thermal conductivity of CLSM made with excavated soil and coal ash for a possible use as thermal grout for borehole heat exchangers. In a preliminary study...

    Tan Manh Do, Young-sang Kim, My Quoc Dang in Proceedings of the 4th Congrès Internation… (2018)

  6. No Access

    Article

    Influence of curing conditions on engineering properties of controlled low strength material made with cementless binder

    As an evaluation of the use of Controlled Low Strength Material (CLSM) in highway construction applications (e.g., backfill, utility bedding, void fill and bridge approaches), the need for adequate curing cond...

    Tan Manh Do, Young-sang Kim, My Quoc Dang in KSCE Journal of Civil Engineering (2017)

  7. Article

    Open Access

    Studies on compressive strength of sand stabilized by alkali-activated ground bottom ash and cured at the ambient conditions

    Bottom ash is a by-product generated during the coal combustion of thermal power plant. Bottom ash-based geopolymer has been reported as a promising substitute of cement in concrete.

    Young-sang Kim, My Quoc Dang, Tan Manh Do in International Journal of Geo-Engineering (2016)

  8. Article

    Open Access

    Engineering properties of controlled low strength material (CLSM) incorporating red mud

    Controlled low strength materials (CLSM), known as flow able fill is used as a replacement of compacted soil in cases where the application of the latter is difficult or impossible. The low mechanical requirem...

    Tan Manh Do, Young-sang Kim in International Journal of Geo-Engineering (2016)

  9. Article

    Open Access

    Improvement of engineering properties of pond ash based CLSM with cementless binder and artificial aggregates made of bauxite residue

    Controlled low strength material (CLSM), known as flow able fill is used as a replacement of compacted soil in cases where the application of the latter is difficult or impossible. The low mechanical requireme...

    Tan-manh Do, Young-sang Kim, Byung-cheol Ryu in International Journal of Geo-Engineering (2015)