![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
448 Result(s)
-
Article
Establishment and validation of an organic coating aging evaluation model based on analytic hierarchy process principle
There are various failure modes of organic coating protective systems and the accurate evaluation of their failure degree has attracted many attentions in recent years. In this study, on the basis of eight fai...
-
Article
Numerical simulation of fatigue fracture in gradient high-strength steel: effects of carbides and gradient structure on stress–strain response and crack propagation behavior
Focusing on the joint effect of gradient structure and carbides, this work explores the stress–strain response of gradient high-strength steels under cyclic loading and their fatigue crack propagation behavior...
-
Article
Enhanced tribology properties induced by eutectic microstructure strengthening and in-situ reinforcing in laser cladded composite coating
With the development of laser deposition technology, the Invar alloy matrix materials is a kind of potential laser deposited coating because of low expansion coefficient, which is favor to decrease the residua...
-
Article
A review: current urea sorbents for the development of a wearable artificial kidney
The wearable artificial kidney (WAK) holds great promise as a potential alternative to hemodialysis for treating end-stage renal disease (ESRD), offering patients longer and more frequent dialysis within a com...
-
Article
Role of Cr on the interfacial bonding, mechanical, and electrochemical corrosion properties of Cu matrix composites co-reinforced by Al2O3 whisker and graphene: combined experiments and first-principles calculations
The interface of Cr-doped Cu matrix composites co-reinforced by Al2O3 whisker and graphene was constructed based on the first principle of density functional theory (DFT). The relationship between the interfacial...
-
Article
Tailoring microstructure and mechanical anisotropy of laser-MIG hybrid additive manufacturing TC11 titanium alloy through solution aging treatment
The mechanisms of microstructure transformation and mechanical anisotropy of laser-MIG hybrid additive manufacturing TC11 titanium alloy after solution aging treatment are investigated. In this paper, differen...
-
Article
Calcium-based nanomaterials for cancer therapy
The aim of this paper is to review and analyze the advancements in the development and application of multifunctional calcium-based nanomaterials for cancer treatment, discussing their roles, challenges, and f...
-
Article
Compressive mechanical behavior of B2 FeAl-based metal-intermetallic laminate composites
In this paper, B2-FeAl based metal-intermetallic laminate (MIL) composites with and without NiTi shape memory alloy fibers were fabricated by two-step vacuum hot pressing combined with “multi-thin foils” stack...
-
Article
Formation of < 100 > vacancy dislocation loops from two-dimensional vacancy platelets in body-centered cubic iron
The < 100 > vacancy dislocation loop is a unique defect of radiation damage in ferritic steels for advanced nuclear systems, but the mechanism responsible for the loop formation remains a puzzle. Here, we repo...
-
Article
Integrated microstructural simulations and mechanical property predictions for age-precipitated Al–Mg–Si alloys
Having a full understanding of the precipitate and its mechanical response in aged Al–Mg–Si alloys is challenging. This work builds a comprehensive analysis framework that integrates artificial aging precipita...
-
Article
Characterization of multi-step creep behavior and fractional derivative modeling for a water-saturated coal
The long-term stability of coal pillars affected by cyclic dry-saturation state faces serious challenge in the normal operation of underground reservoirs in coal mines. The time-dependent deformation of coal i...
-
Article
Solvent-free fabrication of mechanically durable superhydrophobic film with regular hollow structures for passive cooling
Passive daytime radiative cooling (PDRC) is an emerging nonpolluting, nonenergy-consuming cooling technology that relies on high reflectivity in the solar band and high emissivity in the infrared band. As an o...
-
Article
Zn do** for enhanced sodium-ion conductivity and air stability in Na3SbS4 solid electrolyte
Solid electrolytes equipped battery show promise in solving energy storage and ecological concerns owing to their excellent electrical conductivity and chemical stability. Only a limited number of substances s...
-
Article
An icephobic coating for aircraft anti-icing system
Aircraft icing is a fairly common phenomenon, which may occur during take-off, landing and flight of the aircraft. In order to ensure flight safety, it is necessary to carry out research on aircraft anti-icing...
-
Article
Strengthening mechanisms and high-temperature oxidation properties of laser-clad TaNbZrTi refractory high entropy alloy coatings
In the quest to enhance the performance of conventional high-temperature alloys, the limitations of existing materials have become apparent. Refractory high entropy alloys (RHEAs) have emerged as promising can...
-
Article
Development of a decellularized liver matrix-based nanocarrier for liver regeneration after partial hepatectomy
Integrating carrier drug therapy with recent advances in liver tissue regeneration, this paper proposes a novel nanomedicine-based approach to drug delivery, with the aim of enhancing the regenerative capacity...
-
Article
Mesopore-rich sheets/fibers carbon mat derived from triphase polymer solutions as self-supporting electrodes for capacitive deionization
Of the carbon materials for capacitive deionization (CDI), carbon nanofibers prepared by electrospinning are a good alternative. A convenient method for effectively increasing the mesopore volume and modulate ...
-
Article
Advances in multiple reinforcement strategies and applications for silica aerogel
Aerogels offer outstanding characteristics such as lightweight, high porosity, large specific surface area, and low density. For silica aerogels, because of the particular network containing –Si–O–Si–, it has ...
-
Article
Hydrothermal synthesis of fluorescent carbon dots from myrrh residue for Fe3+ detection and antioxidant application
In current work, myrrh residue, a special type of natural biomass, was used as the feedstock for carbon dots (CDs) preparation for the first time. The effect of synthesis conditions including ethylenediamine a...
-
Article
Correction: Synthesis and structural characterizations of CrCoFeNiMnx (0 ≤ x ≤ 1) high-entropy-alloy thin films by thermal reduction in hydrogen