103 Result(s)

Chapter

A Layered 5-axis Machining Method

This paper discusses a method that combines 5-axis NC machining and rapid prototy** for manufacturing complex shape parts. The combination allows NC machining to deal with surfaces in a part that cannot be a...

Hui Li, Lee Yong Tsui, Haiqing Gong, Bo Li, Jiguo Zou in Machining Impossible Shapes (1999)

Chapter and Conference Paper

An Integrated Approach to a Multi-Attribute Decision Problem Through a Case Study

This article presents an integrated approach to reaching, a robust decision in a full-scale multi-attribute decision problem inspired from a real-word case. The Hypothetical Equivalents and In-Equivalents Meth...

Ashish Ganguli, Yong Zeng, Akif A. Bulgak in Information Technology For Balanced Manufa… (2006)

Article

Quantitative analysis of fine nano-sized precipitates in low-carbon steels by small angle neutron scattering

The small angle neutron scattering (SANS) technique was used to determine the nano-sized precipitates in interstitial free (IF) and low-carbon (LC) steels with a hot-rolling temperature. The real-space direct ...

Beak Seok Seong, Eunjoo Shin, Shi-Hoon Choi, Yong Choi, Young Soo Han… in Applied Physics A (2010)

Article

Nanosecond laser ablation and deposition of silicon

Nanosecond-pulsed KrF (248 nm, 25 ns) and Nd:YAG (1064 nm, 532 nm, 355 nm, 5 ns) lasers were used to ablate a polycrystalline Si target in a background pressure of <10⁻⁴ Pa. Si films were deposited on Si and GaAs...

Wee Ong Siew, Seong Shan Yap, Cécile Ladam, Øystein Dahl… in Applied Physics A (2011)

Article

Research on automatic high velocity arc spraying technique and metastable coating materials

Into the 21st century, remanufacturing engineering has been accepted by more and more people in China. Remanufacturing is an industrial maintenance technology for worn or waste electro-mechanical products usin...

**u-Bing Liang, Yong-**ong Chen, Zhi-Bin Zhang, Shi-Cheng Wei… in Advances in Manufacturing (2013)

Article

Erratum to: Modulation of diffusion with polarized lasers

Sen-Yong Chen, Othmane Benafan, Raj Vaidyanathan, Aravinda Kar in Applied Physics A (2014)

Article

Generalized evidence theory

Dempster-Shafer evidence theory is an efficient tool in knowledge reasoning and decision-making under uncertain environments. Conflict management is an open issue in Dempster-Shafer evidence theory. In past de...

Yong Deng in Applied Intelligence (2015)

Article

Serration and Noise Behavior in Advanced Materials

Yong Zhang, Wei-hua Wang, Peter K. Liaw… in Journal of Iron and Steel Research Interna… (2016)

Article

Effect of Zn, Cu and Ni addition on microstructure and mechanical properties of as-cast Mg-Dy alloys

This paper presents some research information on the effects of Zn, Cu and Ni on the microstructure and mechanical properties of as-cast Mg-2Dy (at.%) alloys. The Mg-2Dy alloy is composed of α-Mg and Mg₂₄Dy₅ phas...

Guang-li Bi, **ao-mei Luo, **g Jiang, Yong-gang Zhang, Jian-ji Xu… in China Foundry (2016)

Article

Radiation heat transfer model for complex superalloy turbine blade in directional solidification process based on finite element method

For the sake of a more accurate shell boundary and calculation of radiation heat transfer in the Directional Solidification (DS) process, a radiation heat transfer model based on the Finite Element Method (FEM...

Dun-ming Liao, Liu Cao, Tao Chen, Fei Sun, Yong-zhen Jia, Zi-hao Teng… in China Foundry (2016)

Article

Fabrication of polyimide spheres using a pulsed laser at 355 nm

A new approach for manufacturing hollow polyimide (PI) microspheres is presented. The method is based on cavitation bubbles and small CO₂ gas bubble which can generate uniform microspheres. When liquid PI was irr...

Yong-Won Ma, Moon-Suk Kang, Chan Park, Sung-Moo Hong, Sang-Mae Lee… in Applied Physics A (2016)

Article

Analysis of internal crack in a six-ton P91 ingot

P91 is a new kind of heat-resistant and high-tensile steel. It can be extruded after ingot casting and can be widely used for different pipes in power plants. However, due to its mushy freezing characteristics...

**g-an Yang, Hou-fa Shen, Bai-cheng Liu, Ya-dong Xu, Yong-** Hu… in China Foundry (2016)

Article

Microstructure and properties of mechanical alloying particles reinforced aluminum matrix composites prepared by semisolid stirring pouring method

Aluminum matrix composites reinforced with mechanical alloying particles (SiC_p) were fabricated by the semisolid stirring pouring method. The influence of mechanical alloying particles and Mg on the microstructur...

Yao-qiang Si, Zhi-yong You, **g-xin Zhu, Lai-qiang Cai, **-shan Zhang in China Foundry (2016)

Article

Erratum to: Progress of p-channel bottom-gate poly-Si thin-film transistor by nickel silicide seed-induced lateral crystallization

Sol Kyu Lee, Ki Hwan Seok, Jae Hyo Park, Hyung Yoon Kim, Hee Jae Chae… in Applied Physics A (2016)

Article

Development and application of inverse heat transfer model between liquid metal and shot sleeve in high pressure die casting process under non-shooting condition

To predict the heat transfer behavior of A380 alloy in a shot sleeve, a numerical approach (inverse method) is used and validated by high pressure die casting (HPDC) experiment under non-shooting condition. Th...

Wen-bo Yu, Yong-you Cao, Zhi-peng Guo, Shou-mei **ong in China Foundry (2016)

Article

Effect of Li on formation of long period stacking ordered phases and mechanical properties of Mg-Gd-Zn alloy

Alloys with composition of Mg_96-x Gd₃Zn₁Li _x (at.%) (x=0, 2, 4, and 6) were prepared by conventional casting. The microstructures of these alloys...

Li-yun Wei, **-shan Zhang, Wei Liu, Chun-xiang Xu, Zhi-yong You… in China Foundry (2016)

Article

Erratum to: Synthesis and characterization of kraft lignin-graft-polylactide copolymers

Seok Ju Kim, Yong Sik Kim, Oh-Kyu Lee, Byoung-Jun Ahn in Wood Science and Technology (2016)

Article

Optimization of flow control devices in a ten-strand billet caster tundish

The physical model of a ten-strand billet caster tundish was established to study the effects of various flow control devices on the melt flow. Before and after the optimization of the melt flow, the inclusion...

Shu-guo Zheng, Miao-yong Zhu in China Foundry (2016)

Article

Formation mechanism of bimetal composite layer between LCS and HCCI

A low carbon steel (LCS)/high chromium white cast iron (HCCI) bimetal wear plate about 20 mm in thickness was prepared by liquid-liquid bimetal composite casting technology to substitute for the welding wear p...

Yong-chang Zhu, Zun-jie Wei, Shou-fan Rong, Hong-wei Wang, Chun-ming Zou in China Foundry (2016)

Article

RFID analytics for hospital ward management

In this paper, we present an RFID-enabled platform for hospital ward management. Active RFID tags are attached to individuals and assets in the wards. Active RFID readers communicate with the tags continuously...

Chun-Hung Cheng, Yong-Hong Kuo in Flexible Services and Manufacturing Journal (2016)