![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Cavitation erosion of aluminium alloys
Cast aluminium-silicon, cast aluminium-zinc and mechanically alloyed aluminium alloys were eroded in distilled water using a 20 kHz ultrasonic vibratory device. The erosion was measured by weight loss, and the...
-
Article
Sliding wear of laser alloyed coatings on Al-12% Si
-
Article
Pultrusion and properties of unidirectional glass fibre-polypropylene matrix composites
-
Article
Cavitation erosion of aluminium alloy matrix/ceramic composites
-
Article
Strength and microstructure of electrodischarge-machined titanium diboride
-
Article
Strength of tin-based soldered joints
Single overlap joints of copper and brass soldered with tin and tin-based solders containing (wt%) 1% Cu, 3.5% Ag, 5% Sb, 57% Bi, and 2% Ag 36% Pb, have been tested in shear at 20 and 100 °C, and with strain r...
-
Article
Flexural strength of lapped and oxidized siliconized silicon carbide
A siliconized silicon carbide composite has been microstructurally characterized, oxidized in air at 1350 °C for times up to 1079 h, air-cooled, and tested in four-point bending in the lapped condition at vari...
-
Article
Strength of surface-modified calcite/nylon 6 composites
-
Article
Fibre coatings and the mechanical properties of carbon fibre/nylon 6 composites
-
Article
Corrosion, erosion-corrosion, and the flexural strength of WC-Co hardmetals
The corrosion of commercial hardmetals containing 6, 8 and 10% Co with small additions of Cr3C2 and VC, in solutions of pH 1, 3, 5 and 10, and in a cutting fluid of pH 8.6, has been investigated using weight loss...
-
Article
Microstructure and properties of the surface layers of an injection-moulded thermotropic polymer
-
Article
Shot peening, laser surface melting and the cavitation erosion of an austenitic grey iron
An austenitic flake graphite grey iron in the as-cast condition (AC) was laser surface melted (LSM), and the AC and LSM irons were shot peened (ACp and LSMp). The irons were eroded in distilled water and 0.02%...
-
Article
Silicon steels hot-dip galvanized with zinc-nickel alloys
-
Article
Substrate roughness, deposit thickness and the corrosion of electroless nickel coatings
The affect of substrate roughness and coating thickness on the corrosion resistance of electroless nickel coatings on mild steel in a 0.99M Na2SO4 + 0.01 M H2SO4 + 0.05M NaCl solution has been investigated using ...
-
Article
Substrate roughness, cold work and the oxidation of pure iron at 200 to 600° C
-
Article
Affect of deposition in an ultrasonic field on the corrosion of electroless nickel coatings
-
Article
Mechanical properties and the phases formed in an alumina-aluminosilicate sol refractory fired at 1200 to 1600° C
-
Chapter
Nonlinear Waves and Switching Effects at Nonlinear Interfaces
Over the past several years, a new direction has arisen in nonlinear optics, which can be described as self-action at nonlinear interfaces (i.e. an interface between linear and nonlinear transparent media). In...
-
Article
Anodic polarization and corrosion of WC-Co hardmetals containing small amounts of Cr3C2 and/or VC
The anodic polarization and corrosion properties of commercial WC-Co hardmetals with different grain sizes and containing small amounts of Cr3C2 and/or VC in acid (pH 2.8), acid/3% NaCl, and neutral 3% NaCl solut...
-
Article
Anodic polarization of Zn-Sn alloys in simulated concrete solutions containing 1 M chloride