-
Chapter
Comparative Evaluation of Mesoscale Sensitivity to Crack Formation in Multi-pass Welds Using Wires IN52 and IN52MSS
Assessment of susceptibility of multipass welds, produced by using wires ERNiCrFe-7 (IN52) and ERNiCrFe-13(IN52MSS), to crack formation was carried out. The PVR test was used to determine susceptibility to cra...
-
Chapter
Multi-scale Modeling of the Stress-Strain State During Welding of Ni-Based Alloys
Numerical modeling of changes of stress-strain state in welding of alloys of Ni-Cr–Fe alloying system at macro- and mesoscales was carried out. The kinetics of changes of stresses and deformations in the weld ...
-
Article
Assessment of causes of fracture in 14Kh17N2 steel blades of GTK-25I gas-pum** unit axial-flow compressors
Causes of fracture of the martensitic-ferritic steel blades of the variable inlet guide vane for an axial-flow compressor of the gas pum** unit GTK-25I have been studied. There are several stages of blade fr...
-
Chapter
Classification and Mechanisms of Cracking in Welding High-Alloy Steels and Nickel Alloys in Brittle Temperature Ranges
-
Article
Investigation of Structure and Crack Formation in Welded Joints of Single Crystal Ni-Base Alloys
Conditions of initiation of hot cracks in welding of single crystal heat-resistant alloys with a 56% content of the γ’-phase were studied. Conditions for providing a polycrystalline structure in HAZ and part o...
-
Article
Investigation of Thermal-Deformation State of Welded Joints in Stable-Austenitic Steels and Nickel Alloys
Peculiarities of variations in values of current and residual stresses and strains in welded joints on austenitic steels with a yield point of about 350 MPa and on high-strength alloys with σ0.2 ~ 800 MPa were st...
-
Chapter
Character of Hot Crack Formation During Welding of Cast Heat-Resistant Nickel Alloys
-
Chapter
The Role of Segregation of Oxygen in Welding Alloys of the INVAR Type
-
Chapter
Effect of Delta-Ferrite on the Properties of Welds in Austenitic Steels at Cryogenic Temperatures
Application of stable austenitic steels as structural materials in the temperature range 293 to 4.2 K requires development of welding technologies that provide structure and properties of welds close to those ...
-
Article
Effect of heat treatment on the resistance of a dispersion hardening nickel alloy to hydrogen embrittlement
-
Prolonged immersion of the alloy in an atmosphere of hydrogen and the magnitude of loading both influence the...
-
-
Article
Effect of the environment on the relationships governing deformation and failure of an iron-nickel alloy in creep
-
The endurance of the specimens of the iron-nickel alloy on the same level of thermal and force loading in vac...
-
-
Article
Concerning embrittlement of welded joints of 12Kh18N1OT steel
-
Article
Shielding of the starting strip on the intermediate roller conveyor of a 2800/1700 mill
-
Article
Temperature relationship of the retarded fracture process of VNS-2 maraging steel