Skip to main content

17 Result(s)

within V. V. Zagnoiko Remove this filter

and

  1. No Access

    Article

    System for automatic control of a rotating furnace

    A computer-aided system is intended for centralized automatic control of the process of firing magnesite in a rotating furnace. It is a multifunctional adaptable information system (MAIS). Descriptions of its ...

    V. V. Zagnoiko, V. M. Grebennikov, A. G. Chelpanov in Refractories (1994)

  2. No Access

    Article

    Certain results of service of unfired periclase-spinel refractories

    The basic picture of wear of unfired PShGB periclase-spinel parts in melting furnaces and cement kilns with different service conditions has been established. Wear of PShGB refractories in arc furnaces occurs ...

    V. V. Zagnoiko, L. D. Bocharov, R. Sh. Nazmutdinov, L. I. Andrievskikh… in Refractories (1993)

  3. No Access

    Article

    Periclase-spinel products based on sintered materials for vacuum treatment of steel outside the furnace

    A technology was developed for periclass-spinel, low-silica chrome-concentrate (SiO2 <1.5%) and sintered periclase (MgO 91–92%, SiO2 < 3%). As regards the resistance in the walls of the metal zone of circulation ...

    A. N. Sokolov, O. V. Kvyatkovskii, E. S. Borisovskii, G. I. Kuznetsov… in Refractories (1991)

  4. No Access

    Article

    Improvement in the design of a vacuum-degassing unit for steel

    A. B. Antipova, A. D. Sborshchik, A. A. Krivosheiko, G. A. Boronov… in Metallurgist (1990)

  5. No Access

    Article

    Melting of magnesia refractory materials in an OKB-955N ore melting furnace

    The experinece in service of the IKB-955N furnace at Magnesite Plant in melting of different magnesia materials was summarized. The influence of a number of factors, including magnesium oxide content in the ch...

    B. P. Aleksandrov, V. V. Zagnoiko, V. N. Koptelov, A. A. Vlasovets in Refractories (1990)

  6. No Access

    Article

    Investigations of nonstandard graphite of Zaval'e and Kyshtym deposits

    B. G. Borisov, I. Ya. Prokhorova, Yu. S. Rodgol'ts, V. Ya. Gushchin… in Refractories (1990)

  7. No Access

    Article

    Operation of type OKB-2126 furnaces for production of molten and cast refractory materials

    Literature and experimental data on operation of type OKB-2126 furnaces in melting of various refractory materials is summarized. The use of their temperature in melting into an overflow is proposed as a unive...

    B. P. Aleksandrov, V. I. Gutman, V. V. Zagnoiko, V. N. Koptelov… in Refractories (1989)

  8. No Access

    Article

    Rational use of caustic magnesite dust in the production of refractories

    Additionally conducted investigations showed the necessity of elimination of delivery to firing of fine dust from electrostatic precipitators contaminated with low-melting compounds of sulfur and fluorine and ...

    K. V. Simonov, V. V. Zagnoiko, V. N. Koptelov, S. A. Smirnov… in Refractories (1989)

  9. No Access

    Article

    Testing low-silica chromium concentrate in the production of refractories for treating steel outside the furnace

    N. P. Skryabin, A. N. Sokolov, E. S. Borisovskii, K. K. Orlov… in Refractories (1989)

  10. No Access

    Article

    Tests of refractories in the batch degassers of the Oskol' Electrometallurgical Combine

    V. G. Kukareko, A. V. Maslennikov, A. V. Lugovskikh, A. N. Sokolov… in Refractories (1989)

  11. No Access

    Article

    Scrap of magnesia parts, the reasons for it, and means of reducing it

    The most common and characteristic forms of scrap of magnesia parts differing in form, dimensions, and composition are shown. These include deviations of the dimensions from the nominal, breaking off of the co...

    K. V. Simonov, V. V. Zagnoiko, L. D. Bocharov in Refractories (1989)

  12. No Access

    Article

    Production and use of periclase-chromite standardized ladle products

    L. B. Khoroshavin, V. A. Perepelitsyn, Yu. A. Zhuneva, Ya. G. Gaponov… in Refractories (1989)

  13. No Access

    Article

    Influence of technological parameters on the properties and wear resistance of periclase-carbon refractories

    A study was made of the influence of the type of periclase, the form and amount of bond, the concentration of graphite and milled periclase, the pressing pressure, and the firing temperature on the compressive...

    K. V. Simonov, V. V. Zagnoiko, G. V. Burdina, V. I. Sakk, A. I. Katunin in Refractories (1988)

  14. No Access

    Article

    Improving the lining design of a steel vacuum degassing unit

    A. B. Antipova, G. I. Kuznetsov, A. I. Agaryshev, A. D. Sborshchik… in Refractories (1988)

  15. No Access

    Article

    Periclase-carbon products for electric steel furnaces

    We developed a waste-free technology for the production and use of periclase-carbon concrete articles PUÉP-116 from sintered periclase powders for the walls and roofs of electric steel furnaces.

    L. B. Khoroshavin, V. A. Perepelitsyn, G. A. Farafonov, V. V. Zagnoiko… in Refractories (1988)

  16. No Access

    Article

    A modernized tunnel kiln for firing magnesia and magnesia-spinellide refractories at 1850°C

    A low high-temperature tunnel kiln was rebuilt, including increasing the length of the firing zone, supplying hot air to the burners, supplying air to the cooling zone through the roof, and providing a system ...

    E. P. Mezentsev, K. V. Simonov, V. A. Kryuchkov, A. G. Luzin… in Refractories (1983)

  17. No Access

    Article

    Refractories for an argon-oxygen steel refining unit

    As a result of investigations of a number of periclase-chromite refractories, the best of them based on a combination of high-temperature strength characteristics, a melted periclase-chromite material was dete...

    A. V. Uzberg, G. S. Kolganov, K. V. Simonov, Yu. K. Mochalov… in Refractories (1982)