![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Experimental determination of permitted temerature gradients in refractories during heating
Equipment was developed for determining the maximum permitted temperature gradients for heating up refractories, using acoustic emission, and ultrasonic control methods.
-
Article
Calculations on gas burners fitted with laval nozzles
-
Article
Drying of steel teeming ladle monolithic linings
Investigations were made of existing methods of drying of the monolithic linings of the steel teeming ladles of the open hearth shops of Nizhnii Tagil and Magnitogorsk Metallurgical Combines and their shortcom...
-
Article
Upgrading burner devices in tunnel furnaces
Gas and air flows have been measured at burners in existing tunnel furnaces by means of diaphragms, throttle washers, and flowmeter tubes, which substantially facilitates adjusting and regulating the thermal c...
-
Article
Improvement in the system of firing tunnel kilns with coke gas
-
Article
Turbulent diffusion in the flame of a rotary kiln
Experimental data on the distribution of velocities in the stream in the flow of air from models of a burner with a normal annular Laval nozzle and a burner with an increase in the angle of opening of the stre...
-
Article
Intensification of combustion of coke gas in rotary kilns
A design of burner developed for burning of coke gas in rotary kilns makes it possible to obtain a saving in fuel and the required firing quality and productivity.
-
Article
A system of measurement and automatic control of tunnel kiln operating conditions
-
Article
Use of fiber thermal insulation in the roofs of continuous furnaces
-
Article
Selection of the parameters of heating up of furnace linings
A method is proposed for obtaining, by numerical methods, the approximate values of the allowable heating rates of furnace linings. The use of the results makes it possible to heat furnaces without failure of ...
-
Article
Stand tests of aluminosilicate large-block concrete parts of high-alumina cement
-
Article
Drying and heating up of tunnel kilns
-
Article
Tests of burners for rotary furnaces
-
Article
Operation of gas-burner devices with increased jet aperture angle for heating rotary furnaces
An increase in the aperture angle of high-velocity gas jets intensifies the mixing of fuel with oxidizer in the accompanying flow as a result of the growth in the transverse pulsation constituent of the veloci...
-
Article
Firing dinas goods in an oxidizing atmosphere in a tunnel kiln
The use of oxidizing atmospheres for firing dinas goods will stabilize the temperature regime in the soaking zone and as a result reduce the production loss.
-
Article
Overhauling a tunnel furnace for firing chamotte products
-
Article
Mastering the firing of firebrick in tunnel kilns at the east siberian refractories factory
The East Siberian Refractories Factory has developed a firing cycle for tunnel kilns, 132 m in length, heated with mazut for firing standard firebrick containing Troshkov clays and imported chamotte.
-
Article
A three-channel burner with regulatable flame
The three-channel gas burner described here has a regulatable flame length and operates efficiently at a gas flow of 3–26 m3/h.
-
Article
Drying — Kilning unit for firing chamotte brick
A drier — kilner unit for firing semidry of plastic-molded chamotte products has become operations In the drier, which adjoins the preheating zone but is not separated from the latter by a curtain, the green p...