-
Article
New Fixed Point for an in-Orbit Calibration Scale Developed on the Basis of In–Bi Eutectic Alloy for Use in New-Generation Highly Stable Onboard Reference Sources
The paper discusses a problem associated with ensuring the stability of Earth-observing satellite instruments performing long-term temperature measurements within the thermal infrared spectral range. Reliable ...
-
Article
First-Class State Working Standard of Units of Wavelength in the Range from 1.25 to 20.00 μm and of Wavenumber in the Range from 500 to 8000 cm–1
The first-class State Working Standard of units of wavelength in the range from 1.25 to 20.00 μm and of units of wavenumber in the range from 500 to 8000 cm–1 developed at the All-Russia Research Institute of Opt...
-
Article
Electrical Properties of High-Quality Synthetic Boron-Doped Diamond Single Crystals and Schottky Barrier Diodes on Their Basis
The temperature dependences of the specific resistance and Hall coefficient of high-quality synthetic boron-doped diamond single crystals grown via a high-pressure high-temperature method are studied. The conc...
-
Article
An Electron-Beam-Induced Current Detector for Diagnostics of Power Converters of Radioisotope β Radiation Based on Diamond Schottky Barrier Diodes in a Scanning Electron Microscope
A system is developed to measure and visualize the distribution of the magnitude of the electron-beam-induced current over the area of diamond Schottky barrier diodes (SBDs) using an electron beam in a Vega3 T...
-
Article
Usage of electron back scattering diffraction for investigation of buried damage layer underneath a single crystalline diamond surface
Electron back scattering diffraction was applied as attempt of control of buried damage layer under the single-crystalline diamond surface. A number of approaches for diamond polishing were developed, and clea...
-
Article
Using electron backscatter diffraction to investigate the influence of mechanical polishing on the state of the surface of diamond
Electron backscatter diffraction is used to determine the influence of mechanical polishing on the surface state of a two-layer structure made from diamond. It is found that the process of polishing does not l...
-
Article
Study of microwave acoustic attenuation in a multifrequency bulk acoustic wave resonator based on a synthetic diamond single crystal
Acoustic attenuation in a multifrequency bulk acoustic wave resonator based on the synthetic diamond single crystal is investigated. The acoustic energy loss in a layered piezoelectric Al/AlN/Mo/(001) diamond ...
-
Article
Ellipsometric Technique for Estimating the Thickness Nonuniformity of Thin-Film Coatings
An ellipsometric technique is proposed for estimating the thickness uniformity of thin film coatings in the range of 5–150 nm.
-
Article
Reference samples for the spatial characteristics of nanostructures based on amorphous multilayer coatings
The development of the reference samples SPAM-20 and SPAM-100 for the spatial characteristics of nanostructures, based on periodic multilayer Al2O3/TiO2 coatings and intended for monitoring measurement accuracy a...
-
Article
Determination of the nonlinearity of capacitive sensors along the Z-axis of an atomic force microscope
The nonlinearity of capacitive sensors along the Z-axis of an atomic force microscope is investigated using test structures containing relief elements of height 300–1200 nm. The dependence of the results of he...
-
Article
Fast-response thermistors made of synthetic single-crystal diamonds
Miniature thermistors are produced from boron-doped synthetic single-crystal diamonds grown under pressure using the thermal gradient method. It is shown that heavily doped diamonds with a boron concentration ...
-
Chapter and Conference Paper
PHYSICAL PROCESSES ON THE SURFACE OF FIELD EMISSION CATHODES BASED ON CARBON NANOSTRUCTURAL MATERIALS
The degradation mechanism of field emission cathodes based on carbon nanostructural materials was investigated in the presented work. Emission current instability came from the adsorption desorption processes ...
-
Article
Calculation of the thicknesses and elastic properties of thin-film coatings using atomic-force acoustic microscopy data
The feasibility of applying atomic-force acoustic microscopy to measure the elastic properties of thin-film coatings and their thickness in the range from several to several hundreds of nanometers is studied. ...
-
Chapter and Conference Paper
Field Emission Investigation of Carbon Nanotubes Doped by Different Metals
Carbon nanotubes (CNT) possess very promising properties for field emission applications. At this paper the two methods of field emission properties improving of multi-wall nanotubes (MWNT) are described. The ...
