![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
New Application of Stainless Steel
Several rigid substrates such as stainless steel, titanium alloy, aluminum alloy, nickel foil, silicon, and sodium lime glass have been employed for manufacturing high quality TiO2 films by metal organic chemical...
-
Article
Modeling of Incubation Time for Austenite to Ferrite Phase Transformation
On the basis of the classical nucleation theory, a new model of incubation time for austenite to ferrite transformation has been developed, in which the effect of deformation on austenite has been taken into c...
-
Article
Investigation on strengthening and toughening mechanisms of Ce-TZP/Al2O3 nanocomposites
The strengthening and toughening mechanisms of hot-pressed Ce-TZP/Al2O3 ceramics were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) method...
-
Article
Effect of Cryogenic Treatment on Property of 14Cr2Mn2V High Chromium Cast Iron Subjected to Subcritical Treatment
Effect of cryogenic treatment on the microstructure, hardening behavior and abrasion resistance of 14Cr2Mn2V high chromium cast iron (HCCI) subjected to subcritical treatment was investigated. The results show...
-
Article
Rheological properties of solution of polyethersulfone in dimethyl sulfoxid
The rheological properties of solution of polyethersulfone(PES) in dimethyl sulfoxid(DMSO) were investigated on a HAAK RS150 cone-and-plate rheological instrument, including the dependence of non-Newtonian Ind...
-
Article
Strength and elastic properties of sandstone under different testing conditions
A laboratory experimental program performed on Wuhan sandstones was presented under monotonic loading, partial cyclic loading during loading path and sine wave cyclic loading with different strain rates to com...
-
Article
Hybrid scheduling model and analysis of performance for switched industrial Ethernet
The fact that outburst traffic in industrial Ethernet was focused on that would bring self-similar phenomenon leading to the delay increase of the cyclical data, and a hybrid priority queue schedule model was ...
-
Article
Simulation of Strip Rolling Using Elastoplastic Contact BEM With Friction
With rollers as elastic bodies and workpieces as elastoplastic bodies, the rolling problem can be viewed as a friction elastic-plastic contact problem. With fewer assumptions in the simulation of strigrolling ...
-
Article
Combustion Characteristics of Polyethylene and Coal Powder at High Temperature
To study the combustion characteristics of the polyethylene (PE) particle and coal powder at blast temperature of the blast furnace, the contents of CO and CO2 of off-gas during the combustion of PE particle and ...
-
Article
Congestion aware routing algorithm for delay-disruption tolerance networks
There were many contradictory evaluation criteria to select next-hop in the delay-disruption tolerance networks (DTN). To solve this problem, an attribute hierarchical model was proposed, in which the predefin...
-
Article
Effects of oxidation treatment on properties of SiO2f/SiO2-BN composites
The silica fiber reinforced silica and boron nitride-based composites (SiO2f/SiO2-BN) were prepared firstly via the sol-gel method and then the urea route, and the effects of oxidation treatment on the component,...
-
Article
Molybdenum recovery from oxygen pressure water leaching residue of Ni–Mo ore
This article investigated molybdenum recovery from oxygen pressure water leaching residue of Ni–Mo ore using alkaline leaching, followed by chemical treatment of leach liquor. Parameters affecting Mo leaching ...
-
Article
Influence of Ce and Mn addition on α-Fe morphology in recycled Al-Si alloy ingots
The influence of Ce or Ce and Mn combined additions on the morphology of α-Fe phases in recycled Al-Si alloys was experimentally investigated by microstructure observation and room temperature tensile testing....
-
Article
Application and Experiment on the Least-action Principle of Explosive Welding of Stainless Steel/Steel
In nature, many physical phenomena follow the least-action principle, which is also abided by the course of explosive welding of stainless steel/steel. The optimal welding interface can be obtained with the le...
-
Article
Efficient fast mode decision using mode complexity for multi-view video coding
The variable block-size motion estimation (ME) and disparity estimation (DE) are adopted in multi-view video coding (MVC) to achieve high coding efficiency. However, much higher computational complexity is als...
-
Article
Direct spray pyrolysis of aluminum chloride solution for alumina preparation
The effects of pyrolysis mode and pyrolysis parameters on Cl content in alumina were investigated, and the alumina products were characterized by XRD, SEM and ASAP. The experimental results indicate that the s...
-
Article
Coupled hydro-mechanical analysis of slope under rainfall using modified elasto-plastic model for unsaturated soils
Two modifications for the basic Barcelona model (BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expr...
-
Article
Influence of Heat Treatment on the Microstructure and Corrosion Resistance of 13 Wt Pct Cr-Type Martensitic Stainless Steel
The effect of heat treatment on the microstructure and the electrochemical properties of a typical corrosion-resistant plastic mold steel in Cl−-containing solution were studied in this research. Through X-ray di...
-
Article
Oxidation and Electrochemical Behavior of Monolayer-Graphene-Coated Copper in Simulated Primary Water
In high-temperature and high-pressure water, traditional anticorrosion approaches are not suitable to be used to protect structural materials from oxidation and corrosion. In this study, monolayer graphene was...
-
Article
Reduction of Fe concentration in Al–4Si–1Fe–1Cu–0.5Zn–0.5Mn alloys with S
In this article, the effect of sulfur on the reduction of Fe concentration in aluminum alloy scraps was investigated. The iron content decreases from 1.224 wt% to <0.854 wt% and achieves an optimal ratio of 30...