15 Result(s)
within
Satpal Sharma
Engineering
-
Chapter and Conference Paper
Study of Microstructure, Mechanical and Fracture Properties of Bagasse Ash Powder Strengthened Aluminium Matrix Composites
The present research work focused on Al 6061-Bagasse ash metal matrix composites are produced with stir casting process. The different mass fractions of bagasse ash particles (1, 3, 5 and 7%) under speed of 30...
-
Chapter and Conference Paper
Comparative Study on the Formability Behaviour of Different Grades of Aluminium Alloys Using Limiting Dome Height Test—An Analytical and Experimental Approach
The objective of this present work is to the comparison of simulation and experimental results on the formability behaviour of dissimilar aluminium alloys such as AA6082-O, AA5083-O, AA5052-H32 and AA6082-T6 u...
-
Chapter and Conference Paper
Study on Microstructure, Mechanical, and Thermal Properties of High-Entropy Alloys
The research focus in almost all applications is currently high-entropy alloys (HEAs). HEAs comprise several main elements which can extend considerably more than conventional alloys by the possible number of ...
-
Chapter and Conference Paper
Experimental Study on the Influence of Material Properties of Dissimilar Aluminium Alloys on Formability Using Tensile Test
The dissimilar aluminium alloy sheets of 5xxx and 6xxx series are commonly used for the industrial applications in the marine, aerospace, and automobile sector due to its excellent physical and mechanical prop...
-
Article
Retraction Note to: Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting
The Editors-in-Chief have retracted this article [1] due to concerns with Figs. 1, 2, 3 and 5.
-
Chapter and Conference Paper
Study the Effects of Input Process Parameters in V-Bending Die on Springback/Go for Different Aluminium Alloys Using Taguchi Approach
Springback effect is the most sensitive feature in sheet metal forming. There are many input process parameters of die and press, which affect the springback/go. In the present study, three different aluminium...
-
Article
Retraction Note: Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology
The Editor-in-Chief of the journal has retracted this article titled “Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology” [1] due to...
-
Article
A Comparative Study of AA6351 Mono-Composites Reinforced with Synthetic and Agro Waste Reinforcement
The use of industrial-agro wastes as reinforcements in the development of composites can be considered as a new inclination in the field of material research. The present investigation involves the development...
-
Article
A review on monolithic and hybrid metal–matrix composites reinforced with industrial-agro wastes
The use of metal–matrix composites are increasing day by day as compared to the alloys, on account of their superiority in terms of properties like hardness, tensile strength, wear resistance and corrosion res...
-
Article
Characterization of waste eggshells and CaCO3 reinforced AA2014 green metal matrix composites: A green approach in the synthesis of composites
Three AA2014 alloy metal matrix composites containing reinforcing particles of eggshell, carbonized eggshell and CaCO3 (powder) were processed. The influences of different particle percentage of eggshell were com...
-
Article
Mechanical and metallurgical characterizations of AA2014/eggshells waste particulate metal matrix composite
Chicken eggshell (ES) is an aviculture byproduct that has been listed worldwide as one of the worst environmental problems. The effective utilization of chicken eggshell (ES) biowaste is strongly encouraged in...
-
Article
RETRACTED ARTICLE: Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting
Electromagnetic stir casting is one of the simplest ways of producing defect free aluminum matrix composites. This work focuses on the fabrication of aluminum matrix composites reinforced with various weight p...
-
Article
RETRACTED ARTICLE: Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology
In this study, a simple roller burnishing tool was made to operate burnishing processes on A356/5%SiC metal matrix composite fabricated by electromagnetic stir casting under different parameters. The effects o...
-
Article
Abrasive Wear Study of NiCrFeSiB Flame Sprayed Coating
In the present study, abrasive wear behavior of NiCrFeSiB alloy coating on carbon steel was investigated. The NiCrFeSiB coating powder was deposited by flame spraying process. The microstructure, porosity and ...
-
Article
Wear study of Ni–WC composite coating modified with CeO2
In the present investigation, Ni–WC composite powder was modified with the addition of CeO2 in order to form a new composition of Ni–WC–CeO2. The Ni–WC and Ni–WC–CeO2 compositions were used for coating deposition...
