-
Article
Chatter detection and suppression in machining processes: a comprehensive analysis
Chatter is a phenomenon that occurs during machining operations, causing vibrations that can negatively impact the quality of the machined surface. Detecting and avoiding chatter is crucial for efficient machi...
-
Chapter and Conference Paper
Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique
Many modern-day applications rely on heat sinks for heat dissipation. Pin fins are one of the heatsinks that are used for cooling and the convection coefficient of a pin fin depends on many parameters that nee...
-
Article
Design and analysis of linear parameter varying control for IPMSM using new European driving cycle
Electric traction motors are the most integral part of fully electric vehicles. Among all traction motors, based on high efficiency, power density, reliability, high torque-to-inertia ratio and control maturit...
-
Article
Limited Frequency Interval Gramians Based Model Order Reduction of Unstable Second Order-Form Systems
In this manuscript, various balanced-truncation methods for limited frequency interval model order reduction applications of unstable second order systems (SOSs) are considered. Limited interval gramians are comp...
-
Chapter and Conference Paper
Corrosion Resistance Enhancement of Stainless Steel Powder Metallurgy in Artificial Body Fluids by Reinforcement of Boron and Niobium
The usage of powder metallurgy technology has been extended until nowadays due its flexibility and practical use in mixing with other alloying elements. This research investigate the analysis of the corrosion ...
-
Chapter and Conference Paper
Review of Current Development of Knee Rehabilitation Device Using Series Elastic Actuator (SEA)
The purpose of this study is to review about the Series Elastic Actuator (SEA), which analyses the theoretical and experimental results of impedance control, stiffness, torque control, energy consumes to gener...
-
Chapter
Optimization of Process Parameters in Electric Discharge Machining Wire-Cut of Magnesium Alloys Using the Taguchi’s Approach
Electric discharge machining wire-cut is an accurate and cost-effective manufacturing route in numerous applications. Taguchi method was used for the analysis of the effect of EDM wire-cut process parameters o...
-
Chapter and Conference Paper
Additive Manufacturing Processes, Challenges and Applications: A Review
Technology has become a major part of everyday life for all of us, from our smartphones, headsets, wearable technology, tablets to implantable lifesaving medical devices and the premium features in the cars we...
-
Article
Preparation of graphene-coated anodic alumina substrates for selective molecular transport
In this paper, we report graphene composite membranes prepared by transfer of a layer of chemical vapor deposition graphene onto porous anodic alumina (AA) substrates with nominal pore size 20 and 30 nm, refer...
-
Chapter
Parametric Optimization of Electrical Discharge Machining of SiSiC Ceramic Through the Taguchi Design Approach
The evolution of silicon carbide (SiC) ceramics has recently attracted the interest of several researchers due to their industrial applications. Nonetheless, the sha** of SiC is quite challenging using conve...
-
Chapter
The Impact of Sintering Dwell Time on Nitrogen Absorption, Densification and Microhardness of 316L Stainless Steel Using Powder Metallurgy
Powder metallurgy is one of the promising techniques for producing different metals and their alloys. The uniqueness of this technique owes to its processing parameters that can be optimized to produce a desir...
-
Chapter
Characterization of Nanomaterials: Techniques and Tools
Nanomaterials have shown excellent physical, electrical, and chemical properties compared to when they are in the bulk phase. Nanotechnology/biotechnology is dealing with synthesis, characterization, and appli...
-
Article
Using machine learning to predict student difficulties from learning session data
The student’s performance prediction is an important research topic because it can help teachers prevent students from drop** out before final exams and identify students that need additional assistance. The...
-
Chapter and Conference Paper
Investigation of Alloy Composition and Sintering Parameters on the Corrosion Resistance and Microhardness of 316L Stainless Steel Alloy
Metals used in implant manufacturing include titanium and its alloys, cobalt-chromium and surgical grade stainless steel. Cobalt chromium and titanium alloys can be four to five times more expensive than stain...
-
Chapter and Conference Paper
Synthesis and Characterization of Bioceramic Oxide Coating on Zr-Ti-Cu-Ni-Be BMG by Electro Discharge Process
In its native state, Zr-Ti-Cu-Ni-Be bulk metallic glass (BMG) do not allow strong physical bonding to the surrounding tissues when implanted, due to its inherent low strength bioinert oxide surface. In this st...
-
Article
Date palm ash-MgAl-layered double hydroxide composite: sustainable adsorbent for effective removal of methyl orange and eriochrome black-T from aqueous phase
Date palm ash (DPA) and MgAl-layered double hydroxide (LDH) composites were synthesized by the co-precipitation method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron mic...
-
Article
Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear
The exceptional properties of graphene make it ideal as a reinforcement to enhance the properties of aluminum matrices and this critically depends on uniform dispersion. In this study, the dispersion issue was...
-
Article
Antioxidant activity, fatty acids characterization and oxidative stability of Gouda cheese fortified with mango (Mangifera indica L.) kernel fat
Effect of mango kernel fat (MKF) on antioxidant characteristics and lipolysis of Gouda cheese was investigated. Milk fat (3.5%) was partially replaced with MKF i.e. 5, 10, 15 and 20% concentrations (T1, T2, T3 a...
