-
Article
Unsteady boundary layer on a circular cylinder embedded to a wedge
The boundary layer growth on a circular cylinder embedded to a wedge, when the motion is started impulsively from rest, is discussed using the method of inner and outer expansions. The equation for the time of...
-
Article
MSoC: Multi-scale Optimized Clustering for Energy Preservation in Wireless Sensor Network
Energy efficient clustering has always been the center of attention among the research community pertaining to wireless sensor network (WSN). Till last decade, there have been significant studies towards clust...
-
Chapter and Conference Paper
Analytical Study On Modified Reduced Beam Section Connections Under Cyclic Behaviour
Steel frames with column and beam connections welded together show brittle nature during earthquakes. According to previous researches, the major damages were the cracks developed in the welded portion between...
-
Chapter and Conference Paper
Fly Ash Based Geopolymer Bricks: A Sustainable Construction Material
Considering the increasing demand for sustainable and environment friendly construction materials, the feasibility of fly ash based alkali activated geopolymer bricks, has been aimed in this project as an alte...
-
Chapter and Conference Paper
Home Automation Using IoT-Based Controller
At present, the technology has been develo** day by day. In this era, the home automation has become the most prominent and develo** design. This is consist of an automated system that can provide luxuriou...
-
Chapter and Conference Paper
IoT-Based Smart Irrigation System
In today’s world due to scarcity of non-renewable energy and increasing demand for energy, we require effective and clean energy for this harnessing energy from solar power which is the best way as it is cost ...
-
Chapter and Conference Paper
Sustainability Assessment of Terracotta Tile Waste Based Geopolymer Building Block
Cement concrete blocks are one of the popular masonry units used in construction. The conventional binder, cement cause heavy impact on environment due to its high utilization of natural resources and emission...
-
Chapter and Conference Paper
Design and Implementation of Fuzzy-Based MPPT Technique for PV Panel
In recent year, solar system with battery charging technology takes a lead in renewable energy developments. This article highlights the effect of charging battery via bidirectional power converter and also to...
-
Chapter and Conference Paper
Performance Analysıs of Polycystıc Ovary Syndrome (PCOS) Detectıon System Usıng Neural Network Approach
Across the worldwide, several women of reproductive age are affected by endrocrinological disorder called Polycystic Ovarian Syndrome (PCOS) or Polycystic Ovarian Disease (PCOD). It is actually estimated to ha...
-
Chapter and Conference Paper
Performance Analysis of BLDC Motor Using Different Controller
Mainly, the DC motors are employed in most of the application. The main objective is to regulate the DC motor system. A motor which displays the appearances of a DC motor but there is no commutator and brushes...
-
Chapter and Conference Paper
Dual-Pipe Damper with Bracing System for Seismic Retrofitting
Dual-Pipe Damper (DPD) is a metallic yielding device for the passive earthquake energy dissipation. It consists of two welded pipes, which is positioned to take shear. DPD works in flexural form, on the basis ...
-
Chapter and Conference Paper
Design and Implementation of Smart Classroom Using Microcontrollers and Advanced Sensors
This paper focuses on smart class rooms in college by installing small Internet-connected devices and various sensors in each classroom. Arduino is used as the brain of the whole controlling system. The input ...
-
Chapter and Conference Paper
Design of Dumbbell-Shaped MIMO Antenna for Wearable Applications
A wearable textile wideband multi-input and multi-output (MIMO) antenna for wireless communication with low mutual coupling and better isolation is presented in this paper. This design consists of three rectan...
-
Chapter and Conference Paper
Structural Performance of Stone Prism Encased Composite Columns as Environment Friendly Structures
Concrete with cement as binder is the most common construction material used in building industry. Carbon dioxide, a potent greenhouse gas produced during cement manufacture causes environmental pollutions. In...
-
Article
Open AccessAnalysis of torque controlling strategies of interior permanent magnet synchronous machine in hybrid electric vehicle
Significance of this research is based on torque controlling strategies in hybrid electric vehicle. The traction motor of a hybrid electric commercial vehicle must have a high power density-to-weight ratio and...
-
Chapter and Conference Paper
Optimization Studies on Bracing Systems and Its Effective Placement to Counteract Earthquakes in Very High Damage Risk Zone
The current study aims to analyze a multi-storey RCC building model subjected to lateral loads induced by Zone V earthquake. In this method, a G+14 storey building is modeled using ETABS v.20, the model is act...
-
Chapter
SVPWM Based Transformerless Z-Source Five Level Cascaded Inverter with Grid Connected PV System
Multilevel DC to AC proper and stage, making them a highly desirable choice for high- medium applications right now. Multilevel design involves the development of specific structures. A no...
-
Chapter
Analysis, Modeling and Implementation of Electric Vehicle Converter Configurations
Petroleum resources are currently less readily available, and there are greater opportunities for automotive uses, particularly in hybrid electric cars. A new technology called (EVs) is improving environment...
-
Article
Mitigation of circulating current and common mode voltage in grid-connected induction motor drive using modified PID-fuzzy controller
Induction motors are frequently utilized in numerous manufacturing due to their reality, are robust in nature, and have low cost. The bearing of an induction motor is proven to be affected in electric mobility...
-
Article
Improved energy efficient BLDC motor fed electric vehicle with a novel hybrid CUK converter topology
For dynamic applications like automotive, pum**, and rolling, brushless direct current (BLDC) motors are generally preferred. The use of BLDC motors is predicted to become mainstream in industries by 2030, r...