Skip to main content

11 Result(s)

within S. L. I. Chan Remove this filter

and

  1. No Access

    Chapter and Conference Paper

    Microstructural Investigation and Impact Testing of Additive Manufactured TI-6AL-4V

    The microstructure and mechanical response of additive manufactured Ti64 under and has been investigated. Quasi-static and dynamic experiments were conducted on electron beam powder bed Arcam A1 (EBM) and ...

    D. C. Austin, M. A. Bevan, D. East… in Characterization of Minerals, Metals, and … (2017)

  2. No Access

    Article

    A microstructural and neutron-diffraction study on the interactions between microwave-irradiated multiwalled carbon nanotubes and hydrogen

    Microwave irradiation is a simple yet effective way of altering the properties of multiwalled carbon nanotubes (MWNTs). This work studies the interactions between microwave-irradiated MWNTs and hydrogen. Effec...

    Y. T. Lee, P. J. Tsai, V. K. Peterson, B. Yang, K. S. Lin… in Journal of Materials Science (2016)

  3. No Access

    Article

    Temperature Effects on the Oxidation of Low Carbon Steel in N2–H2–H2O at 800–1200 °C

    A low carbon, low silicon steel was reacted with flowing N2–H2–H2O gases at temperatures of 800–1,200 °C, to produce scales of fast-growing wüstite, the only stable iron oxide under these conditions. Scaling kine...

    H. Yin, S. L. I. Chan, W. Y. D. Yuen, D. J. Young in Oxidation of Metals (2012)

  4. No Access

    Article

    Ball-milling processing of nanocrystalline nickel hydroxide and its effects in pasted nickel electrodes for rechargeable nickel batteries

    Nanocrystalline Ni(OH)2 powder synthesized by a chemical precipitation method was processed using the planetary ball milling (PBM), and the physical properties of both the ball-milled and unmilled Ni(OH)2 were ch...

    Q. S. Song, C. H. Chiu, S. L. I. Chan in Journal of Solid State Electrochemistry (2008)

  5. No Access

    Article

    Effects of ball milling on the physical and electrochemical characteristics of nickel hydroxide powder

    Nickel hydroxide powder was modified by the method of ball milling, and the physical properties of both the ball-milled and un-milled nickel hydroxide were characterized by scanning electron microscopy, specif...

    Q.S. SONG, C.H. CHIU, S.L.I. CHAN in Journal of Applied Electrochemistry (2006)

  6. No Access

    Article

    Physical and electrochemical characteristics of nanostructured nickel hydroxide powder

    Nanostructured nickel hydroxide powder has been synthesized by a chemical precipitation method with the aid of ultrasound radiation, and the physical properties of the synthesized material were characterized b...

    Q.S. Song, Y.Y. Li, S.L.I. Chan in Journal of Applied Electrochemistry (2005)

  7. No Access

    Article

    Formation of Mg–Mg2Cu nanostructured eutectic in Mg-based metal matrix composite

    We report the fabrication and characterization of a Mg-based metal matrix composite reinforced by MgO ceramic and Mg–Mg2Cu eutectic. The composite was fabricated by sintering and quenching of a Mg–20 wt.% CuO sam...

    N. G. Ma, C. J. Deng, P. Yu, W. Y. Kwok, M. Aravind… in Journal of Materials Research (2003)

  8. No Access

    Article

    Effect of microstructural texture on the creep behavior

    The two steels were prepared with the same composition but different rolling processes. The equiaxed grain of TMCP EH36 steel was produced by thermo-mechanical control rolling (TMCP) with an accelerated coolin...

    S. H. Wang, C. C. Chiang, S. L. I. Chan in Journal of Materials Science (2002)

  9. No Access

    Article

    Effect of grain size and second phase particles on the hydrogen occlusivity of iron and steels

    The trap** of hydrogen by various interfaces in iron and steels has been studied. The hydrogen content of pure iron specimens was found to depend more on hydrogen than those of low angle, and thus specimens ...

    M. Martínez-Madrid, S. L. I. Chan, J. A. Charles… in Material Research Innovations (2000)

  10. No Access

    Chapter and Conference Paper

    Study on the Hydrogen Embrittlement and Corrosion of Stainless Steels Used as Ni/MHx Battery Containers

    Stainless steels are used as the containers for Nickel-metal hydride (Ni/MHx) batteries. In this work stainless steel 304 ∙ 304L ∙ 316 ∙ 316L ∙ 17-4PH and 430 were selected to study their relative susceptibili...

    H. J. Chuang, S. Y. Chen, S. L. I. Chan in Hydrogen Power: Theoretical and Engineerin… (1998)

  11. No Access

    Article

    Effect of retained austenite on the hydrogen content and effective diffusivity of martensitic structure

    In this work, the effects of retained austenite on the hydrogen content and the effective hydrogen diffusivity of an otherwise fully martensitic structure have been studied. In the electrochemical permeation e...

    S. L. I. Chan, H. L. Lee, J. R. Yang in Metallurgical Transactions A (1991)