Skip to main content

previous disabled Page of 332
and
  1. No Access

    Article

    Study on the corrosion resistance of 316L stainless steel by picosecond laser cleaning

    To study the influence of different cleaning methods on the corrosion resistance of 316L stainless steel surface, this paper carried out polarisation curves and electrochemical impedance spectroscopy studied o...

    Aming Wang, Aixin Feng, Yanming Chen, **nhua Gu in Journal of Solid State Electrochemistry (2024)

  2. No Access

    Article

    Combined First-Principles and Machine Learning Study of Thermal Transport and Thermoelectric Properties of p-type Halide Perovskite CsCdX3 (X = Cl, Br)

    The thermal transport and thermoelectric properties of CsCdX3 (X = Cl, Br) were investigated using first-principles calculations and machine learning interatomic potentials. The lattice thermal conductivity was o...

    Wenqiu Shang, Tao Hu, Ding Li, Shichang Li, **anju Zhou in Journal of Electronic Materials (2024)

  3. No Access

    Article

    The Investigation of Preload Relaxation Behavior of CFRP Bolted Joints Under Thermal-Oxygen Environment: Modeling and Experiments

    In this paper, the effects of interference-fit sizes and service environment temperature on the preload and relaxation of CFRP bolted joints are investigated based on an ultrasonic monitoring method. Specimens...

    Xuda Qin, Gongbo Feng, **anming Meng, Sai Zhang, Shipeng Li in Applied Composite Materials (2024)

  4. No Access

    Article

    The Laminated/Network Interface Design and Deformation Behavior of Multilayer Steel

    The SUS304/45 multilayer steels with laminated/network coupling interfaces were fabricated by cold rolling, and the interface evolution behavior and strengthening–toughening mechanism were clarified by microst...

    Jiale Ding, Baoxi Liu, Boyang Zhang in Metallurgical and Materials Transactions A (2024)

  5. No Access

    Article

    A novel reinforced concrete-like composite solid-state electrolyte with enhanced performance for all-solid-state lithium batteries

    Due to superior energy density and safety, all-solid-state lithium-ion batteries (ASSLBs) are considered to be the perfect substitute for lithium-ion batteries. As the most important component of ASSLBs, solid...

    Yanli Ruan, **shuai Feng, **aoyu Huang in Journal of Solid State Electrochemistry (2024)

  6. No Access

    Article

    3D interconnected MOF-derived asymmetric bilayer solid-state electrolyte for enabling homogeneous Li deposition of all-solid-state lithium metal batteries

    Although it has enhanced safety and high energy density, all-solid-state lithium metal battery (ASSLB) still faces challenges in achieving high ionic conductivity, uniform Li+ flux, good interfacial compatibility...

    Qihe Cheng, Feng Wang, Yi Yu, Chunchang Wang in Journal of Solid State Electrochemistry (2024)

  7. Article

    Correction: The influence of boron microalloying on the microstructural and mechanical properties of Ni-Mn-Sn-Gd shape memory alloy

    Yangrui Xu, **angyang **n, Li Gao, **n Guo, Yan Feng, Shaohui Hu in Applied Physics A (2024)

  8. No Access

    Article

    Effect of Ag on High-Temperature Oxidation Behavior of Mg–6.5Gd–5.6Y–0.1Nd–0.01Ce–0.4Zr Alloy

    In this paper, the isothermal oxidation experiments were used to study the effect of Ag on the high-temperature oxidation behavior of Mg–6.5Gd–5.6Y–0.1Nd–0.01Ce–0.4Zr (wt%) alloy oxidized at 350 °C, 400 °C and...

    Shuang Guo, Tianyu Liu, Tianjiao Luo in Acta Metallurgica Sinica (English Letters) (2024)

  9. Article

    Broader Impact symposium brings visibility to LGBTQ+-identifying materials researchers

    Judy Meiksin, Azin Akbari, Ruozhu Feng, Pia Pooker, Anderson Veiga in MRS Bulletin (2024)

  10. No Access

    Article

    Highly toughened PP/Rice husk charcoal composites modified Ethylene Propylene Diene Monomer (EPDM) with glycidyl methacrylate

    In this article, a strategy is proposed to prepare highly toughened composites from polypropylene (PP), rice husk charcoal (RHC) and glycidyl methacrylate (GMA)-modified EPDM using melt blending and hot pressi...

    Y. B. Wang, X. L. Deng, B. Y. Cao, H. P. Feng, J. Chen in Journal of Polymer Research (2024)

  11. No Access

    Article

    Atomistic Investigation of Shock-Induced Amorphization within Micro-shear Bands in Hexagonal Close-Packed Titanium

    The mechanical response of a single crystal titanium sample against (0001)α surface impact was investigated using molecular dynamics simulation. Remarkably, non-uniform plastic deformation was observed in the sam...

    Z. C. Meng, K. G. Wang, T. Ali, D. Li in Acta Metallurgica Sinica (English Letters) (2024)

  12. No Access

    Article

    Evolution of Inclusion Distribution in Continuous Casting Slabs During Strip Feeding

    Feeding strip significantly enhances continuous cast slab quality. To clarify its impact on inclusion distribution, a mathematical model coupling flow, solidification and inclusion motion have been developed. ...

    Rui Zhang, Hong-Chun Zhu, Hua-Bing Li in Metallurgical and Materials Transactions B (2024)

  13. No Access

    Article

    Preparation and property of PVA-based colorful coating composite reinforced with silica aerogel particles filled by high-loaded flame retardant

    Hydrophilic mesoporous silica aerogel particles were synthesized via self-assembly of amphiphilic polymer (Ph8-PEG6-PEOS) and its instantaneous hydrolysis and condensation in the alkaline environment. Meanwhil...

    Yilin Feng, Ran Xu, Ying Li, Beibo Zhang, Jiali Wang in Colloid and Polymer Science (2024)

  14. No Access

    Article

    Photodielectric and photochromic properties of (K0.5Na0.5)NbO3 lead-free ceramics modified by (Ca2/3Mg1/3)(Zn1/3Nb2/3)O3

    The physical properties of ceramics stimulated by light are interesting for exploring new applications. The (Ca2/3Mg1/3)(Zn1/3Nb2/3)O3 modified (K0.5Na0.5)NbO3 ceramics (KNN-xCMZN) were designed to study the phot...

    Yafei Feng, Ling Yang, Mao Ye, **a Wang, Yanghong Ou, Jiwen Xu in Applied Physics A (2024)

  15. No Access

    Article

    A review of recent advances in the stability, efficacy, and biosafety of black phosphorus-based drug delivery

    Two-dimensional black phosphorus nanosheets (BPNSs) possess remarkable structures and properties, including a honeycomb-like wrinkled morphology and a tunable direct band gap. These attributes make BPNSs highl...

    Hailong **e, Zhishu Chen, Nengcui Zhang, Feng Wu in Journal of Materials Science (2024)

  16. No Access

    Article

    Optimization of the Evaluation Method for Bentonite Used in Iron Ore Pelletizing

    Bentonite is an essential binder in the iron ore pelletization process. However, limited research has been conducted on the correlation between the physical and chemical properties of bentonite and its pelleti...

    Wei Mo, Yuxin Feng, Ze** Wang, **lin Yang in Metallurgical and Materials Transactions B (2024)

  17. No Access

    Article

    Impact of the Rare Earth Element La on the Microstructure and Mechanical Properties of the Al/Steel Bimetallic Composite Interface Fabricated by Liquid–Solid Casting

    This research aimed to explore the influence of the rare-earth element La on the interface microstructure and mechanical properties of Al/steel bimetallic composites produced through liquid–solid casting. The ...

    Feng Mao, Anzu Guo, Po Zhang, Yishuo He, Songhao Liu in Metals and Materials International (2024)

  18. No Access

    Article

    CuxO decorated Ti3C2Tx MXene composites for non-enzymatic glucose sensing with large linear ranges

    Ti3C2Tx MXene/CuxO composites were prepared by acid etching combined with electrochemical technique. The abundant active sites on the surface of MXene greatly increase the loading of CuxO nanoparticles, and the s...

    Lei Feng, Junji Chen, Min Yang, Juan Wang, Shougen Yin, Deliang Zhang in Microchimica Acta (2024)

  19. No Access

    Article

    Highly selective electrochemical reduction of nitrate-to-ammonia using iron phosphide self-supported electrode

    Nitrate electrocatalytic reduction (NO3RR) is a potential approach to ammonia (NH3) production, and the limited NH4+–N selectivity and NH4+–N yield rate are great challenges in NO3RR to NH3. Herein, the self-supp...

    Mingye Ren, Ting He, Shihao Han, **gbin Hu, Feng **ao in Journal of Materials Science (2024)

  20. No Access

    Article

    Preparation of Ba(Cu0.5W0.5)O3-based novel high dielectric ceramics: influence of surfactants

    The article investigated the influence of surfactants on the properties of novel Ba(Cu0.5W0.5)O3(BCW)-based high dielectric ceramics prepared using the liquid-phase method, originally employed as a sintering aid....

    JuanJuan Wang, BoChao **e, PengKang Ma in Journal of Materials Science: Materials in… (2024)

previous disabled Page of 332