Page
%P
-
Chapter
Correction to: High-Temperature Polymer Nanocomposites Based on Heterocyclic Networks from Nitrile Monomers
-
Chapter
Phthalonitrile Composites with POSS Nanoparticles
The results of the physical study of a series of phthalonitrile nanocomposites with 0.5 wt.% of functionalized POSS nanoparticles are of four types. Their nanostructure, dynamics, relaxation, elastic and therm...
-
Chapter
Phthalonitrile/Metal Oxide Nanocomposites
The structure and properties of three types of cured PhN/metal oxide nanocomposites with Al2O3, TiO2, or ZnO nanoparticles of an average diameter of 60 nm, which were treated with aminopropyltrimethoxysilane GX-5...
-
Chapter
Introduction. About Heat-Resistant Polymer Thermosets Used as Matrices for Nanocomposites
This introductory chapter gives a brief overview of the four classes of the most heat-resistant polymer matrices of nanocomposites capable of long-term service at temperatures of 250–300 °C and short-term serv...
-
Chapter
CER/Montmorillonite Nanocomposites
The results of physical studies of nanostructure, dynamics, mechanical and thermal properties of DCBE-based CER/amino-MMT nanocomposites are presented. The 2D MMT nanolayers content in these composites varied ...
-
Chapter
Phthalonitrile/Montmorillonite Nanocomposites
The results of physical studies of molecular structure, nanostructure, relaxation, elastic and thermal properties of a group of hybrid phthalonitrile nanocomposites with different contents, from 0.03 to 5 wt.%...
-
Book
-
Chapter
CER/POSS Nanocomposites
The results of physical studies of the structure, dynamics, mechanical, and thermal properties of CER/epoxy-POSS nanocomposites based on CE monomers (DCBE, DCBA, 6F-DCBA) or oligomer (PT-30) published during t...
-
Chapter
Nano- and Subnanocomposites with Silica Units Introduced by a Sol–gel Method
The results of physical studies of the hybrid CER-silica composites with 0.01–10 wt.% silica prepared via a sol–gel technology are presented. HAADF-STEM, EDXS, DMA, DSC, and TGA were used for their characteriz...
-
Chapter
Other CER-Based Nanocomposites
This chapter considers the structure and properties of CER-based nanocomposites containing mesoporous silica particles, graphene oxide (GO), carbon nanotubes (CNTs), or “unzipped” carbon nanotubes (uCNTs). It ...
-
Chapter
Other Types of Phthalonitrile Nanocomposites
The structure and properties of six types of cured PhN nanocomposites containing functionalized silicon nitride, boron nitride, MAX phase, tungsten nanoparticles, MXene nanosheets, and graphite nanoplatelets a...
-
Article
The role of interfacial chemistry and interactions in the dynamics of thermosetting polyurethane–multiwalled carbon nanotube composites at low filler contents
Acid-oxidized multiwalled carbon nanotubes (MWCNTs) were introduced into a polyurethane (PU) matrix at low filler levels (0.01–0.25 wt%) through either van der Waals or covalent interactions, and their glass t...
-
Chapter
Laser-Interferometric Creep Rate Spectroscopy of Polymers
Laser-interferometric creep rate meter (LICRM) and creep rate spectroscopy (CRS), as an original high-resolution method for discrete relaxation spectrometry and thermal analysis, were developed in the authors’...
-
Article
Poly(imide-amide)-poly(ethylene glycol) hybrid networks: nanostructure, molecular dynamics and membrane properties
Nanometer-scale structure, molecular dynamics (at 100-580 K) and membrane properties were studied in two series of poly(imide-amide) (PIA)-poly(ethylene glycol) (PEG) hybrid networks with regularly varied comp...
-
Chapter
Study of Microplasticity of Solids by Laser Interferometry Method
The laser interferometry method has a considerable opportunity for nondestructive characterization of materials. The advantages of this method are: inertialessness, high stability to external action (magnetic ...
