Skip to main content

and
  1. Article

    Open Access

    Thermal properties and calcium-magnesium-alumino-silicate (CMAS) interaction of novel γ-phase ytterbium-doped yttrium disilicate (γ-Y1.5Yb0.5Si2O7) environmental barrier coating material

    Rare-earth disilicates are promising candidates for thermal and environmental barrier coatings (TEBC) in gas turbines that safeguard SiCf/SiC ceramic matrix composites (CMCs) from thermal degradation and environm...

    Buhao Zhang, Hangfeng Zhang, Mingwen Bai in Advanced Composites and Hybrid Materials (2024)

  2. Article

    Open Access

    Steam Degradation of Ytterbium Disilicate Environmental Barrier Coatings: Effect of Composition, Microstructure and Temperature

    Recession of environmental barrier coatings (EBC) in environments containing steam is a pressing concern that requires further research before their implementation in gas turbine engines can be realized. In th...

    Daniel Tejero-Martin, Mingwen Bai in Journal of Thermal Spray Technology (2023)

  3. Article

    Correction to: Preparation of MCrAlY–Al2O3 Composite Coatings with Enhanced Oxidation Resistance Through a Novel Powder Manufacturing Process

    In the Results section, under As-sprayed Composite Coatings, in the first paragraph, there is a correction to “which is approximately 3–5 μm for MCrAlY.”

    Mingwen Bai, Bo Song, Liam Reddy, Tanvir Hussain in Journal of Thermal Spray Technology (2020)

  4. Article

    Open Access

    Preparation of MCrAlY–Al2O3 Composite Coatings with Enhanced Oxidation Resistance through a Novel Powder Manufacturing Process

    MCrAlY–Al2O3 composite coatings were prepared by high-velocity oxygen fuel thermal spraying with bespoke composite powder feedstock for high-temperature applications. Powder processing via a suspension route was ...

    Mingwen Bai, Bo Song, Liam Reddy, Tanvir Hussain in Journal of Thermal Spray Technology (2019)

  5. Article

    Open Access

    Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C

    Laser clads and HVOF coatings from a stellite 6 alloy (Co–Cr–W–C alloy) on 304 stainless steel substrates were exposed both bare and with KCl deposits in 500 ppm HCl with 5% O2 for 250 h at 700 °C. SEM/EDX and PX...

    Zdenek Pala, Mingwen Bai, Frantisek Lukac, Tanvir Hussain in Oxidation of Metals (2017)

  6. Article

    Open Access

    Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C

    Ultra-high temperature ceramics are desirable for applications in the hypersonic vehicle, rockets, re-entry spacecraft and defence sectors, but few materials can currently satisfy the associated high temperatu...

    Yi Zeng, Dini Wang, **ang **ong, Xun Zhang, Philip J. Withers in Nature Communications (2017)