![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Segmentation of gated TI-SPECT images and computation of ejection fraction: A different approach
We describe a set of image processing algorithms and mathematical models that can be advantageously used in schemes for the segmentation of thallium-201-single photon emission computed tomography (SPECT) image...
-
Chapter
Construction Experience with Fermilab-Built Full-Length 50mm SSC Dipoles
Fourteen full length SSC dipole magnets are being built and tested at Fermilab. Their purpose is to verify the magnet design as well as transfer the construction technology to industry. Magnet design is summar...
-
Chapter
Overview of a Robotic System for Azimuthal Dimensions of SSC Dipole Coils
This system measures the azimuthal dimensions of SSC dipole long coils automatically, taking over 500 measurements in less than four hours. These measurements are then analyzed and displayed via software repor...
-
Chapter
Initial Results from 50mm Short SSC Dipoles at Fermilab
Several short model SSC 50mm bore dipoles are being built and tested at Fermilab. Mechanical design of these magnets has been determined from experience involved in the construction and testing of 40mm dipoles...
-
Chapter
SSC Dipole Magnet Measurement and Alignment Using Laser Technology
Advancing into the prototype production stage of the SSC dipole magnets has introduced the need for a reliable, readily available, accurate alignment measuring system which gives results in real time. Componen...
-
Chapter
SSC 40mm Short Model Construction Experience
Several short model SSC magnets have been built and tested at Fermilab. They establish a preliminary step toward the construction of SSC long models. Many aspects of magnet design and construction are involved...
-
Chapter
Analytical Solutions to SSC Coil End Design
As part of the SSC magnet effort, Fermilab will build and test a series of one meter model SSC magnets. The coils in these magnets will be constructed with several different end configurations. These end desig...
-
Chapter
SSC Magnet Mechanical Interconnections
Installation of superconducting accelerator dipole and quadrupole magnets and spool pieces in the SSC tunnel requires the interconnection of the cryostats. The connections are both of an electrical and mechani...
-
Chapter
SSC Superconducting Dipole Magnet Cryostat Magnet Cryostat Model Style B Construction Experience
A program to upgrade the full scale SSC dipole magnet cryostat model function and assembly methods has resulted in a series of dipole magnets designated as style B construction. New design features and assembl...
-
Chapter
SSC Dipole Coil Production Tooling
Superconducting Super Collider dipole coils must be produced to high precision to ensure uniform prestress and even conductor distribution within the collared coil assembly. Tooling is being prepared at Fermil...
-
Chapter
Improved Design for a SSC Coil Assembly Suspension Connection
Close control of the alignment of magnets for the proposed Superconducting Super Collider (SSC) high energy physics research facility is essential for the success of this small bore accelerator. The connection...
-
Chapter
5-cm, No Iron SSC 6-m Dipole Test Program
Magnet Design B for the Superconducting Super Collider (SSC) consists of a 5 cm diameter collared coil assembly 12 m long with concentric aluminum thermal shields at 10 K and 80 K, a G-10 post type support sys...