Skip to main content

and
  1. No Access

    Article

    Numerical Simulation Study on Mechanical and Acoustic Emission Characteristics of Coal–Rock Combined Body Subjected to Cyclic Disturbing Loading

    In order to further study the mechanical properties of coal–rock combined body, the conventional uniaxial compression and cyclic disturbing loading tests were carried on it by numerical simulation method. The ...

    Huiqiang Duan, Si **ong, Weibo Yu in Geotechnical and Geological Engineering (2023)

  2. No Access

    Article

    Characteristics of Collapse Accumulation Body in Roadway and Numerical Simulation of Rescue Channel Excavation

    After the coal mine disaster, the collapsed accumulation body blocked the roadway and interrupted the rescue route, which seriously affected the development of rescue. Based on the post-disaster blockage rescu...

    Guangbo Chen, Pengcheng Teng, Huiqiang Duan in Geotechnical and Geological Engineering (2022)

  3. No Access

    Article

    Numerical Simulation Study on Crack Evolution Characteristics of Coal Specimen Subjected to Conventional Compression Loading

    The paper represents a simulation investigation about the crack evolution and acoustic emission characteristics of coal specimen subjected to conventional compression loading with four confining pressures. Fro...

    Weibo Yu, Huiqiang Duan in Geotechnical and Geological Engineering (2021)

  4. No Access

    Article

    Fractal Characteristics of Coal Specimens’ Surface Cracks in Triaxial Conventional Compression and Cyclic Loading Tests

    This paper presents an experimental investigation of the fractal characteristics about surface cracks of failed coal specimens in triaxial conventional compression and cyclic loading tests. The fractal charact...

    Huiqiang Duan, Shuai Zhang in Geotechnical and Geological Engineering (2020)

  5. No Access

    Article

    A New Gob-Side Entry Retaining Approach with Reinforced Filling Gangue Wall in Thin Coal Seam

    Gob-side entry retaining technology is an effective method for sustainable exploitation of coal resources and has been widely used in China. However, there are a large surrounding rock deformation and hard sup...

    Huiqiang Duan, Ming Sun, Qing Li in Geotechnical and Geological Engineering (2020)

  6. No Access

    Article

    The Fatigue Strength and Failure Mode of Coal Sample Subjected to Cyclic Loading

    In order to study the fatigue strength and failure characteristics of coal samples, a series of multilevel cyclic loading tests were carried out. The test results show that: (1) When the confining pressure cor...

    Jiakun Lv, Yongjie Yang, Shan Ning in Geotechnical and Geological Engineering (2019)

  7. No Access

    Article

    The Fractal Characteristics of Coal Sample’s Fragments Subjected to Cyclic Loading

    A series of test were performed to study the fractal characteristics of fatigue failure of coal samples. The research revealed the difference of fractal characteristics in conventional compression test and cyc...

    Shan Ning, Yongjie Yang, Jiakun Lv in Geotechnical and Geological Engineering (2019)

  8. No Access

    Article

    Deformation and Dissipated Energy of Sandstone Under Uniaxial Cyclic Loading

    The fatigue deformation of sandstone was investigated in the laboratory using uniaxial cyclic loading tests. These tests showed that: (1) Fatigue deformation can be divided into three phases, the primary, stea...

    Huiqiang Duan, Yongjie Yang in Geotechnical and Geological Engineering (2018)

  9. No Access

    Article

    Analysis on Roadside Support Method with Constant Resistance Yielding-Supporting Along the Goaf Under Hard Rocks

    Under hard roof in mining, the roadside support body of gob-side entry retaining bears high pressure, and is easy to damage and fracture. It puts forward the new roadside support method with constant resistanc...

    Zhong** Guo, Wenqiang Mou, Wanpeng Huang in Geotechnical and Geological Engineering (2016)