Skip to main content

previous disabled Page of 2
and
  1. No Access

    Article

    Formation of Coatings from Accelerated Ions of Fluorinated Fullerene C60(CF3)12

    The first results of the deposition of coatings from accelerated ions of fluorinated fullerene C60(CF3)12 are presented. The coatings are formed at room temperature on Si substrates from a beam of singly charged

    V. E. Pukha, A. A. Belmesov, E. N. Kabachkov in Journal of Surface Investigation: X-ray, S… (2024)

  2. No Access

    Article

    Deposition of Wear-Resistant Nanocomposite Coatings from Accelerated C60 Ions

    From accelerated C60 ions at temperatures of 200 and 300°C hard wear-resistant carbon coatings were deposited. It has been established that the mechanical properties of the coatings are determined by the substrat...

    V. E. Pukha, E. I. Drozdova in Journal of Surface Investigation: X-ray, S… (2024)

  3. No Access

    Article

    Structure and Properties of Composite Materials Sintered at High Pressure and Reinforced with Amorphous Boron Particles

    Metal matrix composite materials (CMs) reinforced with boron particles are synthesized from powders of amorphous boron and metal (Ni, Ti) at a pressure of 8 GPa and temperatures of 500–1000°C. It is establishe...

    I. N. Lukina, O. P. Chernogorova, E. I. Drozdova in Russian Journal of Physical Chemistry A (2023)

  4. No Access

    Article

    Effect of Hydrogenation of C60 Fullerenes on the Properties of Their Transformation Products at High Pressures and Temperatures

    New superelastic superhard carbon materials are obtained from C60 fullerites hydrogenated in the solid state in a hydrogen atmosphere to a content of 0.4 wt % H (formula ~C60H3.5). Raman spectroscopy, light and e...

    O. P. Chernogorova, E. I. Drozdova, I. N. Lukina in Nanobiotechnology Reports (2022)

  5. No Access

    Article

    High-Temperature Response of the Carbon Phase Produced from Fullerenes under Pressure

    The properties (indentation hardness, elastic modulus, and elastic recovery) of reinforcing carbon particles obtained from fullerenes by synthesis of metal-matrix composite materials have been studied by high-...

    O. A. Bannykh, I. N. Lukina, E. I. Drozdova in Russian Metallurgy (Metally) (2021)

  6. No Access

    Article

    Nonequilibrium Diamond Growth during the High-Temperature High-Pressure Synthesis of a Composite Material Made of a Mixture of Cobalt and Fullerene Powders

    A composite material (CM) reinforced by diamond particles is fabricated from a mixture of cobalt and 10 wt % C60 powders at a pressure of 8 GPa and a temperature of 1200–1300°C, which is close to the melting temp...

    N. A. Bulienkov, E. A. Zheligovskaya, O. P. Chernogorova in Russian Metallurgy (Metally) (2018)

  7. No Access

    Article

    Electrical and tribological properties of composite material with copper matrix reinforced by superelastic hard carbon

    Electrical and tribological properties of a copper-based composite material reinforced by superelastic hard carbon particles are studied. Composite material specimens have been produced using the hightemperatu...

    V. V. Izmailov, I. N. Ushakova, E. I. Drozdova in Journal of Friction and Wear (2016)

  8. No Access

    Article

    Tribological properties of metal-matrix composite materials reinforced by superelastic hard carbon particles

    Metal-matrix composite materials (CMs) are synthesized from a mixture of a metal powder (Ti, Fe, Co, Ni, Cu, Al-based alloy) and fullerenes (10 wt %). The thermobaric synthesis conditions (700–1000°C, 5–8 GPa)...

    I. N. Ushakova, E. I. Drozdova, O. P. Chernogorova in Russian Metallurgy (Metally) (2016)

  9. No Access

    Article

    Electrical-contact properties of a composite material with a copper matrix reinforced by superelastic hard carbon

    The electrical contact resistance and the electric-erosion wear resistance of the composite material consisting of a copper matrix reinforced by superelastic hard carbon are studied. The reinforcing of CM by c...

    V. V. Izmailov, E. I. Drozdova, O. P. Chernogorova in Russian Metallurgy (Metally) (2015)

  10. No Access

    Article

    Structure and fracture of superelastic hard carbon materials produced from fullerites under pressure

    The composition and size of fullerites and the structures and fracture surfaces of superelastic hard carbon phase (SHP) particles made from them and reinforcing metal-matrix composite materials are studied by ...

    O. A. Bannykh, I. N. Ovchinnikova, O. P. Chernogorova in Russian Metallurgy (Metally) (2011)

  11. No Access

    Article

    Effect of pressure on the formation of superelastic hard particles in a metal-fullerene system and the tribological properties of composite materials reinforced with such particles

    Raman spectroscopy, X-ray diffraction, and microhardness and modulus of elasticity measurements are used to study the influence of compacting pressure (5, 8 GPa) on the structure and properties of the phases p...

    O. P. Chernogorova, E. I. Drozdova, V. M. Blinov in Russian Metallurgy (Metally) (2011)

  12. No Access

    Article

    Diamond synthesis from C60 fullerite using boron and titanium diboride

    Boron-doped diamond has been synthesized from C60 fullerite at 7 GPa and 2000–2050 K using unconventional solvents for carbon: boron and titanium diboride.

    A. A. Shulzhenko, A. N. Sokolov, O. P. Chernogorova, E. I. Drozdova in Inorganic Materials (2009)

  13. No Access

    Article

    Structure and properties of the superelastic and hard carbon particles reinforcing wear-resistant composite materials obtained from mixtures of iron and fullerene powders under pressure

    The structure and mechanical properties of hard and superelastic carbon particles formed at a pressure of 5 GPa at 1200–1400°C upon the consolidation of metal-fullerene powder mixture into a composite material...

    O. P. Chernogorova, E. I. Drozdova, V. M. Blinov in Nanotechnologies in Russia (2008)

  14. No Access

    Article

    Effect of the temperature of compacting a mixture of iron and fullerite powders on the structure and properties of the produced composite material

    X-ray diffraction, Raman spectroscopy, microhardness measurements, and wear tests are used to study the phase composition, structure, and properties of composite materials (CMs) produced by the compaction of a...

    E. I. Drozdova, O. P. Tchernogorova, I. N. Potapova in Russian Metallurgy (Metally) (2006)

  15. No Access

    Article

    Effect of shock-wave treatment on the structure and hardening of austenitic steels

    The structure and hardening of austenitic steels subjected to shock-wave treatment have been studied. This treatment is shown to form a structure whose cell size decreases with increasing pressure. The treatme...

    V. M. Blinov, O. P. Tchernogorova, E. I. Drozdova in Russian Metallurgy (Metally) (2006)

  16. No Access

    Article

    Relationship Between Post-Tetanic Potentiation of the Cholinosensitivity of Neurons in the Common Snail and a Humoral Factor

    Plots of post-tetanic changes in the amplitude of the acetylcholine-evoked influx current (the ACh current) in common snail command neurons were compared in different experimental conditions: with and without ...

    M. S. Abramova, E. I. Drozdova, V. L. Nistratova in Neuroscience and Behavioral Physiology (2004)

  17. No Access

    Article

    Regulation of Post-Tetanic Increases in the Cholinosensitivity of Neurons in the Common Snail by the Na,K Pump: The Role of Na/Ca Exchange and Calcium Mobilization

    A. S. Pivovarov, E. I. Drozdova in Neuroscience and Behavioral Physiology (2003)

  18. No Access

    Article

    Ca-Dependent Regulation of the Na-K-Pump by Post-Tetanic Sensitization of Extrasynaptic Cholinoreceptors in Common Snail Neurons

    Studies were conducted on the role of the Na,K pump and intracellular calcium in the previously observed phenomenon of increased cholinosensitivity of the somatic membranes of neurons LPa3 and RPa3 in the comm...

    A. S. Pivovarov, E. I. Drozdova in Neuroscience and Behavioral Physiology (2002)

  19. No Access

    Article

    Dose-Dependence of the Excitatory Effects of Acetylcholine on Common Snail Neurons after Orthodromic Tetanization

    A. S. Pivovarov, E. I. Drozdova in Neuroscience and Behavioral Physiology (2002)

  20. No Access

    Article

    Generalized Post-Tetanic Changes in Excitatory Postsynaptic and Acetylcholine-Evoked Currents in Neurons in the Common Snail

    Changes in excitatory postsynaptic currents (EPSC) and influx currents induced by local iontophoretic application of acetylcholine (ACh currents) to the surfaces of the bodies of identified neurons LPa3 and RP...

    A. S. Pivovarov, E. I. Drozdova, A. A. Moskvitin in Neuroscience and Behavioral Physiology (2001)

previous disabled Page of 2