Skip to main content

previous disabled Page of 2
and
  1. No Access

    Chapter and Conference Paper

    Experimental Proof of Concept of Contact Pressure Distribution Control in Frictional Interfaces with Piezoelectric Actuators

    Complex machinery holding several components in assembled structures requires a multitude of joints which inevitably develop frictional contacts under different dynamics conditions. Those conditions have been ...

    M. Lasen, D. Dini, C. W. Schwingshackl in Nonlinear Structures & Systems, Volume 1 (2023)

  2. No Access

    Chapter and Conference Paper

    Tribomechadynamics Challenge 2021: A Multi-harmonic Balance Analysis from Imperial College London

    This work presents the approach and results of the Dynamics Group at Imperial College in face of the Tribomechadynamics 2021 challenge. The challenge encourages to obtain the best blind prediction of a benchma...

    M. Lasen, L. Salles, D. Dini in Nonlinear Structures & Systems, Volume 1 (2023)

  3. Article

    Open Access

    Strength of interference screw fixation of meniscus prosthesis matches native meniscus attachments

    Meniscal surgery is one of the most common orthopaedic surgical interventions. Total meniscus replacements have been proposed as a solution for patients with irreparable meniscal injuries. Reliable fixation is...

    M. K. Bartolo, E. Provaggi, K. K. Athwal in Knee Surgery, Sports Traumatology, Arthros… (2022)

  4. Article

    Open Access

    Fast laser surface texturing of spherical samples to improve the frictional performance of elasto-hydrodynamic lubricated contacts

    Textured surfaces offer the potential to promote friction and wear reduction by increasing the hydrodynamic pressure, fluid uptake, or acting as oil or debris reservoirs. However, texturing techniques often re...

    G. Boidi, P. G. Grützmacher, A. Kadiric, F. J. Profito, I. F. Machado in Friction (2021)

  5. No Access

    Chapter and Conference Paper

    Analysis of an Actuated Frictional Interface for Improved Dynamic Performance

    Friction in assembled structures is of great interest due to its ability to reduce the vibration amplitude of critical components. The nonlinear behaviour of a structure depends on a variety of physical parame...

    M. Lasen, Y. Sun, C. W. Schwingshackl, D. Dini in Nonlinear Structures & Systems, Volume 1 (2021)

  6. Article

    Open Access

    Advances in nonequilibrium molecular dynamics simulations of lubricants and additives

    Nonequilibrium molecular dynamics (NEMD) simulations have provided unique insights into the nanoscale behaviour of lubricants under shear. This review discusses the early history of NEMD and its progression fr...

    J. P. Ewen, D. M. Heyes, D. Dini in Friction (2018)

  7. No Access

    Article

    An open-source equipment for thin film fabrication by electrodeposition, dip coating, and SILAR

    A reliable and cheap equipment is hereby proposed for the deposition of thin films on several substrates. This system is capable of deposition using three different techniques sequentially on the same substrat...

    M. Congiu, F. Decker, D. Dini in The International Journal of Advanced Manu… (2016)

  8. Article

    Open Access

    Ultrastructural studies of Intraflagellar Transport trains in Chlamydomonas reinhardtii suggest a revision of the current model for IFT trafficking in the flagellar compartment

    E Vannuccini, E Paccagnini, F Cantele, M Gentile, D Dini, F Fino, C Mencarelli in Cilia (2015)

  9. No Access

    Article

    Emission spectra and transient photovoltage in dye-sensitized solar cells under stress tests

    Dye-sensitized solar cells have been tested before, during, and after stress tests performed either under intense Xe-lamp illumination (equivalent to 1 sun up to 2.5 sun) or under thermal cycles between room T an...

    M. Giustini, D. Angelone, M. Parente, D. Dini in Journal of Applied Electrochemistry (2013)

  10. No Access

    Article

    Analytical and Numerical Models for Tangential Stiffness of Rough Elastic Contacts

    The paper considers elastic contact of rough surfaces and develops a simple analytical expression for the stiffness of the contact under tangential loading, which predicts that the contact stiffness is proport...

    S. Medina, D. Nowell, D. Dini in Tribology Letters (2013)

  11. Article

    Cardiac cycle efficiency: a new index for cardiac work estimation tested during aortic valve plasty

    S Romagnoli, M Romano, C Lazzeri, G Santoro, F Meucci, D Quattrone, D Dini in Critical Care (2010)

  12. No Access

    Chapter and Conference Paper

    Prediction of Fatigue Crack Growth Rates in Ti-6Al-4V Alloy

    Crack initiation under thermo-mechanical fatigue is analyzed with consideration given to oxidation and creep strain accumulation. Transitions and interactions between different mechanisms, crack initiation and...

    A. M. Korsunsky, D. Dini, M. J. Walsh in Multiscale Fatigue Crack Initiation and Pr… (2008)

  13. No Access

    Article

    Measurement of Residual Elastic Strains in a Titanium Alloy Using High Energy Synchrotron X-Ray Diffraction

    Residual elastic strains in a bent bar of titanium alloy Ti-6Al-4V were measured using high energy diffraction on station 16.3 at SRS Daresbury. Using a single bounce Laue crystal monochromator, diffraction pe...

    A. M. Korsunsky, J. Liu, M. Golshan, D. Dini, S. Y. Zhang in Experimental Mechanics (2006)

  14. No Access

    Article

    Asymptotic characterisation of nearly-sharp notch root stress fields

    A solution procedure is developed for characterising the stress state at the root of a notionally sharp notch, but possessing a small root radius, using two nested asymptotic solutions: an outer asymptote repr...

    D. Dini, D. A. Hills in International Journal of Fracture (2004)

  15. No Access

    Article

    The prognostic value of cytogenetics is reinforced by the kind of induction/consolidation therapy in influencing the outcome of acute myeloid leukemia – analysis of 848 patients

    We studied the impact of cytogenetics and kind of induction/consolidation therapy on 848 adult acute myeloid leukemia (AML) patients (age 15–83). The patients received three types of induction/consolidation re...

    G Visani, P Bernasconi, M Boni, GL Castoldi, S Ciolli, M Clavio, MC Cox in Leukemia (2001)

  16. No Access

    Article

    Electrosynthesis and characterization of poly(3-methylthiophene) on different substrates

     We report on the study of the electropolymerization of 3-methylthiophene onto Pt, p-Si and indium-tin oxide deposited on polyester using quartz crystal microgravimetry, electrochemical and spectroelectrochemi...

    L. Micaroni, D. Dini, F. Decker in Journal of Solid State Electrochemistry (1999)

  17. No Access

    Article

    A comparison of the electrochromic properties of WO3 films intercalated with H+, Li+ and Na+

    The electrochromic response of W03 thin films under electrochemical insertion from nonaqueous electrolytes of one of the three different ions: protons, lithium and sodium cations is reported. In spite of the c...

    D. Dini, F. Decker, E. Masetti in Journal of Applied Electrochemistry (1996)

  18. No Access

    Article

    Hyaluronidase as an antidote to extravasation ofVinca alkaloids: Clinical results

    Skin necrosis is a recognized potential consequence of an inadvertent extravasation ofVinca alkaloids in the surrounding tissues during i.v. administration. Experimental studies suggest that hyaluronidase, an enz...

    G. Bertelli, D. Dini, G. B. Forno, A. Gozza in Journal of Cancer Research and Clinical On… (1994)

  19. No Access

    Article

    Irrigation for colostomized cancer patients: a rational approach

    Management of a colostomy by irrigation is simple and effective. Five hundred and nine patients having a colostomy for rectal cancer during the last 10 years were assessed by our Rehabilitation Department as p...

    D. Dini, M. Venturini, G. Forno, G. Bertelli in International Journal of Colorectal Disease (1991)

  20. No Access

    Chapter and Conference Paper

    Design and Dynamic Characteristics Investigation of a High Performance Spherical Bearing

    The note presents some design considerations for a multipad externally pressurized spherical bearing fed with incompressible fluid.

    E. Gimelli, D. Dini, R. C. Michelini, R. Ghigliazza in Space Engineering (1970)

previous disabled Page of 2