Skip to main content

37 Result(s)

within C.L. Yang Remove this filter

previous disabled Page of 2
and

  1. No Access

    Article

    Self-Assembly and Photoinduced Deformation of Microspheres of an Azo Molecule Containing a 1,4,3,6-Dianhydrosorbitol Core and Cinnamate Peripheral Groups

    This study investigated the controllable fabrication of anisotropic particles with different sizes and morphologies via self-assembly and photoinduced deformation of azo colloidal microspheres, which were form...

    X. T. Ai, L. E. Wang, X. Luo, B. Tang, S. L. Li, H. E. Zhu, H. L. Tang… in Colloid Journal (2023)

  2. No Access

    Article

    Identification of Localized Void Defects in Composite by Recurrence Quantification Analysis of Ultrasonic Backscattered Signal

    Voids usually have a detrimental effect on the performance of carbon fiber reinforced polymer (CFRP). This paper presents a nonlinear dynamic method, known as recurrence quantification analysis (RQA), for the ...

    Z. Wang, C. L. Yang, X. J. Zhou, Y. H. Teng in Russian Journal of Nondestructive Testing (2019)

  3. No Access

    Article

    A digital pulse fitting method for the \( \alpha\) decay studies of short-lived nuclei

    When studying short-lived nuclei via \( \alpha\)α spectroscopic methods at recoil separators, the decay events tend to happen immediately after the recoil implantations or the decays of parent nuclei and therefore ...

    H. B. Yang, Z. G. Gan, Z. Y. Zhang, M. M. Zhang… in The European Physical Journal A (2019)

  4. No Access

    Article

    Meta-analysis of survival benefit with postoperative chemoradiotherapy in patients of lymph node positive esophageal carcinoma

    The effect of postoperative chemoradiotherapy (CRT) for esophageal carcinoma (EC) was investigated. Patients who can obtain benefit from this treatment modality have not yet been well identified.

    H. Luo, Y. Y. Cui, J. G. Zhang, Y. N. Sun… in Clinical and Translational Oncology (2018)

  5. No Access

    Article

    Ultrasonic Flaw Echoes Detection Based on Generalized S-Transform

    Micro defects usually lead to performance degradation of materials. Pulse-echo technique is an effective method of revealing micro defects in materials, and booming in which has been witnessed over the years. ...

    X. Zeng, C. L. Yang, X. J. Zhou, Y. C. Chen in Russian Journal of Nondestructive Testing (2018)

  6. No Access

    Article

    Tensile Fracture Modes in Fe-22Mn-0.6C and Fe-30Mn-3Si-3Al Twinning-Induced Plasticity (TWIP) Steels

    Tensile tests were carried out to investigate the differences in fracture mechanisms between Fe-22Mn-0.6C and Fe-30Mn-3Si-3Al (wt pct) twinning-induced plasticity steels. Although both steels possess a strong twi...

    H. K. Yang, Y. Z. Tian, Z. J. Zhang… in Metallurgical and Materials Transactions A (2017)

  7. No Access

    Article

    Mechanical Properties and Fracture Behaviors of GTA-Additive Manufactured 2219-Al After an Especial Heat Treatment

    2219-Al parts were produced by gas tungsten arc-additive manufacturing and sequentially processed by an especial heat treatment. In order to investigate the effects of heat treatment on its mechanical properti...

    J. Y. Bai, C. L. Fan, S. B. Lin, C. L. Yang… in Journal of Materials Engineering and Perfo… (2017)

  8. No Access

    Article

    Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing

    A 2219-Al thin-walled component was produced by gas tungsten arc (GTA)-additive manufacturing, and the microstructures were observed. The thin wall can be divided into two regions: a top region and a bottom re...

    J. Y. Bai, C. L. Fan, S. b. Lin, C. L. Yang… in The International Journal of Advanced Manu… (2016)

  9. No Access

    Article

    Molten pool behaviors and weld forming characteristics of all-position tandem narrow gap GMAW

    A tandem gas metal arc welding system was utilized for narrow gap welding in three welding positions: flat, vertical down, and overhead welding position. The two arcs worked in two independent molten pools res...

    X. Y. Cai, C. L. Fan, S. B. Lin, C. L. Yang… in The International Journal of Advanced Manu… (2016)

  10. No Access

    Article

    Mechanical properties of 2219-Al components produced by additive manufacturing with TIG

    Several 2219-Al components were produced by additive manufacturing with tungsten inert gas (TIG), and thin walls were selected to study the mechanical properties. Results show that the average hardness is 77.5 HV

    J. Y. Bai, C. L. Yang, S. B. Lin, B. L. Dong… in The International Journal of Advanced Manu… (2016)

  11. Article

    Open Access

    Recovery of strain-hardening rate in Ni-Si alloys

    In this study, the recovery of strain-hardening rate (RSHR) was discovered for the first time in polycrystalline materials (Ni-Si alloys) that have only dislocation activities during tensile test. Detailed mic...

    C. L. Yang, Z. J. Zhang, T. Cai, P. Zhang, Z. F. Zhang in Scientific Reports (2015)

    Download PDF (2063 KB) View Article

  12. No Access

    Article

    Prediction and optimization of weld bead geometry in oscillating arc narrow gap all-position GMA welding

    Oscillating arc narrow gap all-position gas metal arc (GMA) welding is primarily applied for the construction of large metal structure with the advantages of high efficiency and quality. According to the chara...

    W. H. Xu, S. B. Lin, C. L. Fan, C. L. Yang in The International Journal of Advanced Manu… (2015)

  13. No Access

    Article

    Comparative Studies on Growth and Physiological Responses of Unicellular and Colonial Microcystis aeruginosa to Acorus calamus

    In order to explore the growth inhibition and physiological responses of unicellular and colonial Microcystis aeruginosa during coexistence with Acorus calamus, algal densities, chlorophyll a contents, exopolysac...

    S.-H. Zhang, J.-J. Chang, J.-Y. Cao… in Bulletin of Environmental Contamination an… (2015)

  14. No Access

    Article

    Evaluation on microstructure and mechanical properties of high-strength low-alloy steel joints with oscillating arc narrow gap GMA welding

    Abstract with the purpose of improving weld joint quality and productivity, the oscillating arc narrow gap gas metal arc (GMA) welding was employed in welding quenched and tempered high-strength low-alloy thic...

    W. H. Xu, S. B. Lin, C. L. Fan, C. L. Yang in The International Journal of Advanced Manu… (2014)

  15. No Access

    Article

    Effects of SiO2 Nanoparticles and Diethyl Carbonate on the Electrochemical Properties of a Fibrous Nanocomposite Polymer Electrolyte for Rechargeable Lithium Batteries

    In this study, a fibrous nanocomposite polymer electrolyte (NCPE) based on poly(vinylidene fluoride-co-hexafluoropropylene) was prepared through a electrospinning technology. Effects of SiO2 nanoparticles and die...

    C. L. Yang, H. Y. Liu, Q. L. **a, Z. H. Li… in Arabian Journal for Science and Engineering (2014)

  16. No Access

    Article

    Statistical modelling of weld bead geometry in oscillating arc narrow gap all-position GMA welding

    In this work, the oscillating arc narrow gap all-position gas metal arc (GMA) welding process was developed to improve efficiency and quality in the welding of thick-walled pipes. The statistical models of nar...

    W. H. Xu, S. B. Lin, C. L. Fan, X. Q. Zhuo… in The International Journal of Advanced Manu… (2014)

  17. No Access

    Article

    Environmental quality assessment and spatial pattern of potentially toxic elements in soils of Guangdong Province, China

    The spatial distributions of Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, and Zn concentrations in surface soils of Guangdong Province, China, were investigated to evaluate the environmental quality of these potentially to...

    C. L. Yang, R. P. Guo, Q. L. Yue, K. Zhou, Z. F. Wu in Environmental Earth Sciences (2013)

  18. No Access

    Article

    Diffusion Soldering of Bi0.5Sb1.5Te3 Thermoelectric Material with Cu Electrode

    For the production of thermoelectric modules, Bi0.5Sb1.5Te3 was sequentially electroplated with a 4-μm Ni barrier layer and a 10-μm Ag layer and then diffusion soldered with the Cu electrode, which was also elect...

    C. L. Yang, H. J. Lai, J. D. Hwang… in Journal of Materials Engineering and Perfo… (2013)

  19. No Access

    Article

    Diffusion Soldering of Pb-Doped GeTe Thermoelectric Modules with Cu Electrodes Using a Thin-Film Sn Interlayer

    Directly coating a GeTe(Pb) thermoelectric device with a Ni barrier layer and an Ag reaction layer and then diffusion soldering with a Cu electrode coated with Ag and Sn leads to breakage at the GeTe(Pb)/Ni in...

    C.L. Yang, H.J. Lai, J.D. Hwang, T.H. Chuang in Journal of Electronic Materials (2013)

  20. Article

    IKK-β mediates hydrogen peroxide induced cell death through p85 S6K1

    The IκB kinase (IKK)/NF-κB pathway has been shown to be a major regulator in cell survival. However, the mechanisms through which IKK mediates cell death are not clear. In this study, we showed that IKK-β contrib...

    C-H Jia, M Li, J Liu, L Zhao, J Lin, P-L Lai, X Zhou… in Cell Death & Differentiation (2013)

    Download PDF (1891 KB) View Article
previous disabled Page of 2