Skip to main content

9 Result(s)

within Anil Borah Remove this filter

and

  1. No Access

    Article

    Ageing Kinetics of Al-4.28Cu-1.60 Mg Alloy Micro-Alloyed with Titanium

    In this study, ageing behaviour and precipitation kinetics of cast Al-4.28Cu-1.60 Mg alloy micro-alloyed with titanium (Ti) is studied. Age hardness of the alloy was observed to increase on addition of Ti. The...

    Manash Bhuyan, Anil Borah in Journal of The Institution of Engineers (India): Series D (2024)

  2. No Access

    Article

    Microstructure and Mechanical Properties Correlation of Al-4.28Cu-1.60 Mg Alloy Micro-Alloyed with Titanium

    In this work, the microstructural, mechanical and wear characterizations of Al-4.28 Cu-1.60 Mg alloy micro-alloyed with titanium (Ti) (0.02, 0.04 and 0.08 wt.%) were carried out. SEM and EDS analyses of as-cas...

    Manash Bhuyan, Anil Borah in Journal of Materials Engineering and Performance (2023)

  3. No Access

    Article

    Structure–Property Correlation of Al–Mg–Si Alloys Micro-alloyed with Sn

    Microstructure and mechanical properties of the cast and wrought Al–Mg–Si alloy micro-alloyed with 0.04 wt% and 0.08 wt% Sn were investigated at various processing conditions, viz. as-cast, solutionised, homog...

    Monoj Baruah, Anil Borah in International Journal of Metalcasting (2022)

  4. No Access

    Article

    On the enhancement of wear resistance of Al-Mg-Si alloy via micro-alloying Sn

    The effect of micro-alloying Sn (0.08 wt.%) on dry sliding abrasive wear behaviour of cast Al-Mg-Si alloy was investigated. Additionally, microstructure, hardness, and their impact on wear resistance were also...

    Monoj Baruah, Anil Borah in Sādhanā (2021)

  5. No Access

    Chapter and Conference Paper

    A Study of Effect of Micro-alloying of Tin on Ageing Behaviour of 6xxx Series Aluminium Alloys

    Tin (Sn) acts as an important role in the ageing behaviour of Al–Mg–Si alloy (6xxx series). In the present work the effect of micro-alloying of (0.04 wt% Sn) on the natural age hardening behaviour of Al–Mg–Si ...

    Monoj Baruah, Anjali Ladha, Manish Baruah, Arnav Kar… in Advances in Mechanical Engineering (2020)

  6. No Access

    Chapter and Conference Paper

    A Study on the Effect of Micro-alloying of Titanium in 2xxx Aluminium Alloy

    In the present work, the effect of micro-alloying (0.02 wt%) of Titanium (Ti) in Aluminium (Al) alloys 2xxx series was studied with respect to its micro-hardness values. Two alloy compositions of Al–6.84Cu–0.0...

    Manash Bhuyan, Arnab Saikia, Anil Borah in Advances in Mechanical Engineering (2020)

  7. No Access

    Article

    A Study on the Effect of Ageing and Intermetallic Compound Growth on the Shear Strength of Surface Mount Technology Solder Joints

    The effect of ageing and intermetallic compound formation on the surface mount solder joints and its shear strength behavior under extreme mechanical and thermal conditions have been discussed in this paper. T...

    Jyotishman Nath, Sabuj Mallik, Anil Borah in Journal of The Institution of Engineers (I… (2015)

  8. No Access

    Article

    Microstructural evolution and hardening behaviour of cast and heat-treated Ru−Al and Ru−Al−Ni alloys

    Ru−Al alloys with compositions of Ru59Al41, Ru46Al35Ni19, and Ru39Al13Ni48 were prepared via an arc melting technique and subsequent heat treatment at 1450°C for 24 h. Microstructures of the alloys in the as-cast...

    Anil Borah, P. S. Robi, Ajit L. Mujumdar… in Metals and Materials International (2008)

  9. No Access

    Article

    Synthesis of nano-crystalline RuAl by mechanical alloying

    Nano-crystalline RuAl was synthesised by mechanical alloying. The evolution of the nano-crystalline RuAl phase during the mechanical alloying process using ruthenium and aluminium powders was studied. During t...

    Anil Borah, P. S. Robi, A. Srinivasan in Metals and Materials International (2007)