54 Result(s)
within
**anbo Wang
Engineering
English
-
Article
Numerical and Physical Simulation of Mixing Process in Argon-Stirred Ladles with Single and Dual Bottom Injection
A combined method including numerical and physical simulations has been employed to investigate the influence of nozzle arrangement and flow rate on the mixing effect and flow pattern within a 100-ton industri...
-
Article
Open AccessTwo-Dimensional Materials for Highly Efficient and Stable Perovskite Solar Cells
Recent progress on the applications of 2D materials in perovskite solar cells is discussed from the views of bottom interfaces, top interfaces, and electrodes.
-
Article
Field Tests of the Horizontal Freezing Method for Shield Tunneling in Complex Sites
To study the freezing characteristics and the effects of the horizontal freezing method of shield tunneling on the surrounding environment at a complex site, a systematic study with field measurements of the t...
-
Article
Dual receiver topology for bipolar dynamic wireless power transfer systems
Segmented dynamic wireless power transfer (DWPT) systems can solve the problems of large battery size, long charging time, and the limited driving range of electric vehicles (EVs). Aiming at the load voltage f...
-
Article
Experimental Research on Bearing Behaviors of Cement Mortar-Expanded Precast Piles
Cement mortar-expanded precast (CMEP) piles comprise a new class of expansion pile technology. To reveal their vertical bearing properties, full-scale research on the bearing performance of expanded piles unde...
-
Article
Open AccessRecent Advances in Aqueous Zn||MnO2 Batteries
Recently, rechargeable aqueous zinc-based batteries using manganese oxide as the cathode (e.g., MnO2) have gained attention due to their inherent safety, environmental friendliness, and low cost. Despite their po...
-
Chapter and Conference Paper
A Practical Method for Calculating Indirect Carbon Emissions of Electricity Users in Large Power Grid
The accurate measurement methods for carbon emissions are critical in both incentivizing consumers towards energy conservation and emission reduction, as well as ensuring fairness in carbon emissions trading. ...
-
Article
Open AccessStudy of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution
Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scala...
-
Article
Study on electrochemical discharge machining of small holes array on glass with ultrasonic vibrating tube electrode
Electrochemical discharge machining (ECDM), as a new type of non-traditional machining method, is widely used in the machining of insulating hard and brittle materials such as glass and ceramics. However, ther...
-
Article
Probing the Mechanical Performance of Micro-architected Porous Structures Through In Situ Characterization and Analysis
Micropores play critical roles in both natural and man-made materials. Such pores take on a variety of shapes and sizes ranging from spherical to irregular sphere-like voids with diameters spanning from the na...
-
Article
Significance and formulation of ground loss in tunneling-induced settlement prediction: a data-driven study
Ground loss is the volume of soil excavated in excess of designed excavation. It defines the boundary conditions for ground deformation field and thereby dominates the magnitude of tunneling-induced ground set...
-
Article
Tool wear prediction based on multidomain feature fusion by attention-based depth-wise separable convolutional neural network in manufacturing
Computer numerical control (CNC) machine tool is the foundation of the equipment manufacturing industry, and its technical level is an important indicator to measure the development level of a country’s equip...
-
Article
Development and implementation of a dynamic force measurement system for automatic tool changer system and drawbar mechanism in machining center
Automatic tool changer system (ATCS) and drawbar mechanism (DM) are two of key basic parts for realizing the automatic tool-changing cycle in machining centers. The dynamic force in a tool-changing cycle plays...
-
Chapter and Conference Paper
Analysis of Network Loss Influence Characteristics of Distribution Network with Different Types of DG
Grid connection of large-scale distributed power sources has become an integral part of the development of a new power system and the achievement of “dual carbon” goals. DG access on a large scale leads to the...
-
Chapter and Conference Paper
River Shoreline Project Management Based on BIM Technology: A Case Study of the Environmental Improvement Project of the Green Water Wetland in the Nan**g Reach of the Yangtze River
The Building information modeling (BIM) is one of the most promising developments in the architecture, engineering, and construction fields. It carries out the data management during the whole period from site...
-
Chapter and Conference Paper
Androgynous Tool Quick-Change Mechanism and Its Misalignment Tolerance of Space Manipulator
In order to expanding the appliance of space manipulators and meet the requirements of increasingly diverse on-orbit missions, an androgynous design tool quick-change mechanism for switching end-effectors of s...
-
Chapter and Conference Paper
Image Segmentation Method Based on Grabcut and Hue-Saturation-Value Color Space Model
Aiming at the problems of low accuracy and poor effect of image segmentation under complex background, the characteristics and attributes of Hue-Saturation-Value (HSV) color space are analyzed, and a color dis...
-
Article
Open AccessAn In-Situ Formed Tunneling Layer Enriches the Options of Anode for Efficient and Stable Regular Perovskite Solar Cells
It is first disclosed that the key to the efficient regular Ag-perovskite solar cells (PSCs) is a tunneling layer (silver iodide, AgI) that is in situ formed by the natural re...
-
Article
Theoretical and experimental study on localization improvement in ultrasonic vibration–assisted spark-assisted electrochemical drilling process
Spark-assisted electrochemical machining (SAEM) is an advanced machining method, which can manufacture microstructures on non-conductive hard and brittle materials such as glass. However, there are still some ...
-
Article
Open AccessDevelopment of digital organ-on-a-chip to assess hepatotoxicity and extracellular vesicle-based anti-liver cancer immunotherapy
Organ-on-a-chip systems have been increasingly recognized as attractive platforms to assess toxicity and to develop new therapeutic agents. However, current organ-on-a-chip platforms are limited by a “single p...
