Skip to main content

230 Result(s)

within **-**a Ding Remove this filter Characterization and Evaluation of Materials Remove this filter Manufacturing, Machines, Tools, Processes Remove this filter

previous disabled Page of 12
and

  1. No Access

    Article

    Effect of Nb on Microstructure and Wear Property of Laser Cladding CoCrFeNiTiNbx High-Entropy Alloys Coatings

    A group of CoCrFeNiTiNbx high entropy alloys (HEAs) coatings were produced by laser cladding. The effect of Nb content on the microstructure and wear resistance of the HEAs coatings was investigated. The results ...

    Lin Ding, Hongxin Wang, Quan **umin in Metals and Materials International (2024)

  2. No Access

    Article

    Study on the Wear and Corrosion Resistance of CoCrFeNiTi0.8-xcBN Laser Cladding Coatings

    This work aimed to explore the effect of cBN (cubic boron nitride) content on the microstructures and wear-corrosion resistance of the CoCrFeNiTi0.8-xcBN (x = 0, 2, 4, 6 wt.%) particle-reinforced high-entropy all...

    Zhongsheng Li, Kaiqiang Song, Yixin Bai, Dalong Cong… in Journal of Thermal Spray Technology (2024)

  3. No Access

    Article

    Microstructure Evolution and Strengthening Mechanism of AlCrFe2NiCuMox High Entropy Alloys

    The AlCrFe2NiCuMox multiphase high entropy alloys were designed, prepared and characterized. The effect of Mo addition on the microstructure evolution and mechanical properties of AlCrFe2NiCuMox high entropy allo...

    Junhui Zhao, **shuai Zhang, **aoyi Li, Xujie Gao… in Metals and Materials International (2024)

  4. No Access

    Article

    Structural optimization, interfacial contact, and transverse thermoelectric properties of Ag2Te/Bi0.5Sb1.5Te3 artificially tilted multilayer thermoelectric devices

    Artificially tilted multilayer thermoelectric devices (ATMTDs) have attracted widespread attention due to their advantages of simple and stable structure. In this study, n-type Ag2Te and p-type Bi0.5Sb1.5Te3 (BiS...

    Maojun Yang, Zhiqiang Ding, ** Wei, Longzhou Li, Wanting Zhu… in Applied Physics A (2024)

  5. No Access

    Article

    Ultraviolet photodetectors based on wide bandgap semiconductor: a review

    Ultraviolet (UV) photodetectors (PDs) are effective devices that convert UV radiation energy into electrical signals, and they are widely used in aerospace, chip manufacturing and other fields. At present, the...

    Jijun Ding, Pengfei Zhao, Haixia Chen, Haiwei Fu in Applied Physics A (2024)

  6. No Access

    Article

    Quantitative detection of lateral subsurface cracks based on laser-generated Rayleigh waves in the frequency domain

    In this paper, the depth and length of lateral subsurface cracks were gauged using laser-generated Rayleigh waves in the frequency domain. First, the frequency domain characteristics of reflected and transmitt...

    Buer Chen, Chuanyong Wang, Wen Wang, Yun Wang, Keqing Lu… in Applied Physics A (2024)

  7. Article

    Open Access

    Fullerenol as a novel therapeutic agent for sepsis-induced cardiomyocytes damage

    Sepsis-induced myocardial damage (SIMD) is a serious complication of sepsis that affects cardiac function and prognosis. However, effective methods for the prevention and treatment of SIMD are presently lackin...

    Tingjun Zhang, Ling Chen, Xuefeng Ding, Rendong He, Hao Wang… in Applied Physics A (2024)

    Download PDF (1616 KB) View Article

  8. No Access

    Article

    Synergistic regulation of pore and grain by hot pressing for enhanced thermoelectric properties of Bi0.35Sb1.65Te3

    Over the years, Bi2Te3-based alloys have garnered considerable recognition as exceptional thermoelectric materials. Researchers have diligently pursued avenues to enhance the properties of these materials, with a...

    **g He, Zhiyan Hu, Juncheng Ding, Tiezheng Sun, Mingpeng Shi… in Applied Physics A (2024)

  9. No Access

    Article

    Influence of volume fraction on magnetodielectric effect in CoFe2O4–Ba0.8Sr0.2TiO3 multiferroic fluids

    The multiferroic fluids use an external field to rotate the magnetization/polarization direction of the multiferroic particles to form a chain structure with a clam** effect, which is expected to achieve the...

    Hong Ao, Chen Chen, Haowen Mu, Youlun Zhu, Gang Meng, Yiwen Ding… in Applied Physics A (2024)

  10. No Access

    Article

    Microstructures and Wear Resistance of Mo Coating Fabricated by In Situ Laser-Assisted Plasma Spraying

    In order to solve the problems of high porosity and poor wear resistance of molybdenum (Mo) coating deposited by atmospheric plasma spraying (APS), the in situ laser-assisted plasma spraying (LAPS) technology ...

    Panpan Zhang, Shengyu Jiang, Yujia Guo, Yongfeng Sui… in Journal of Thermal Spray Technology (2024)

  11. No Access

    Article

    Preparation and characterization of PEGylated magnetic ferrite with a biocompatible delivery for DOX

    Characterization results of Fourier transformed infrared spectrometer(FT-IR), thermogravimetry–differential thermal analysis TG–DTA, dynamic stability control (DSC), transmission electron microscopy (TEM), and...

    Feng Ding, Guobin Qiu, Fengliang Tan, Tengyan Wu, Longzhen Ding… in Applied Physics A (2023)

  12. No Access

    Article

    Effect of Sub-Structure and Precipitation Behavior on Mechanical Properties of Al–xCu–Li Alloys

    The tensile properties and microstructure of extruded and cold rolled 2A55 Al–Li alloys with different Cu content were studied. After solution treatment, the strength of extruded sheets is slightly higher than...

    Yu-zhuo Li, Guang-jun Zeng, Ding-ding Lu… in Metals and Materials International (2023)

  13. No Access

    Article

    Toughness and Strength Coordination in a Low-Alloy Zn–0.5 Mg Alloy via Extrusion and Post-Deformation Annealing

    Zn is considered one of the most attractive bioresorbable candidates for metal implants, because it does not exhibit the inherent limitations of Fe and Mg. To explore the coordination of the toughness and stre...

    Ruimin Li, Yutian Ding, Hongfei Zhang in Metals and Materials International (2023)

  14. No Access

    Article

    Lattice distortion, mechanical and thermodynamic properties of (TiZrHf)C and (TiZrHf)N ceramics

    Although severe lattice distortion is one of the core effects of multicomponent materials, accurate quantitative description is still an open issue. In this paper, density functional theory (DFT) calculations ...

    Ning Ding, Huang-Hui Jiang, Chao-Ren Xu, Lin Shao, Bi-Yu Tang in Applied Physics A (2023)

  15. No Access

    Article

    Carbon-coated high nickel cathode nanosheet with stable structure for lithium-ion batteries

    High nickel content is favor for improving the capacity of Li-ion batteries, but it would allow the electrode suffering moisture and CO2 corrosion. Thus, high conduction of carbon coating is needed for the electr...

    Jialin Guo, Rui Ding, Yan Wu, Peng Zheng in Applied Physics A (2023)

  16. No Access

    Article

    Microstructures and Mechanical Properties of Thick Ti–6Al–3Nb–2Zr–1Mo Joint by Magnetron-Controlled Narrow Gap TIG Welding

    The butt joint of 30 mm-thick Ti–6Al–3Nb–2Zr–1Mo titanium alloys were achieved by the magnetron-controlled narrow gap TIG welding. Microstructure and mechanical properties of joint were comprehensively explore...

    Laifa Ding, Binhao Qin, Keke Ge, Zhibin Zeng… in Metals and Materials International (2023)

  17. No Access

    Article

    Effect of Aging Precipitate on Ductility Anisotropy and Low Cycle Fatigue Behavior of AA2195 Al-Li Alloy

    The mechanical properties and low-cycle fatigue behavior of the hot-rolled AA2195 Al-Li alloy taken along the longitudinal direction and transverse direction were investigated. The anisotropy ductility of the ...

    Gui Wang, Ben Lin, Ding-ding Lu, San-xi Deng… in Metals and Materials International (2023)

  18. No Access

    Article

    Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP

    Tweaking the distribution of grains, precipitates, and texture components is a successful strategy employed to enhance the strength and formability of Mg alloys. Herein, moderate temperature equal channel angu...

    Hongfei Zhang, Jian Lei, Yutian Ding, Yubi Gao… in Metals and Materials International (2023)

  19. No Access

    Article

    Effect of Surface Micro-Texturing on the Tribological Properties of TiB-TiC/Co-Based Coatings by Laser Cladding

    TiB-TiC/Co-based coatings with different surface micro-texturing were prepared on the sliding bearing by laser cladding and fiber pulse laser under the help of E-RSC-100 rotary workbench. The effect of different ...

    Lin Ding, **umin Quan in Journal of Thermal Spray Technology (2023)

  20. No Access

    Article

    Hot Processing Map and Dynamic Precipitation Behavior of 1460 Al–Li Alloy During Hot Deformation

    Hot processing maps have been widely used to reveal the relationship between microstructures and final performances of Al–Li alloys after deformation. However, there are few researches on the hot processing ma...

    Ding-ding Lu, **-feng Li, You-jie Guo, Peng-cheng Ma… in Metals and Materials International (2023)

previous disabled Page of 12