185 Result(s)
within
Conference Paper
Bo**g Lu
Characterization and Evaluation of Materials
-
Chapter and Conference Paper
A Novel Experimental Set-up for Generating Microbubbles for Removal of Inclusions
The empirical relations that govern multiphase interactions between microbubbles and inclusions indicate a strong dependence between bubble size and overall inclusion capture efficacy. Established probability ...
-
Chapter and Conference Paper
Scanning Electron Microscopy Analyses of Horizontal Single Belt Casting Thin Strips of AA6111 Alloy
Horizontal Single Belt Casting (HSBC) is a promising Near-Net-Shape Casting (NNSC) technology for the future production of thin metal strips, given its outstanding economical and environmental benefits, compar...
-
Chapter and Conference Paper
Influence of Binder Properties on Dynamic Shear Response of Asphalt Mixture
For predicting the shear-related rutting potential of asphalt pavement, it is important to understand the shear response of asphalt mixture and find the link between the mixture response and component material...
-
Chapter and Conference Paper
Evaluation of the Properties of Bituminous Binders Recovered from Various Sites in Europe
Binders were recovered from various sites in Europe; including locations in Belgium, Croatia, France, and UK, with a service life varying between 8 and 21 years. The asphalt cores, obtained from these sites, w...
-
Chapter and Conference Paper
Experimental Validation of the Dual-Oxidation Routes in Bituminous Binders
Oxidative ageing in bituminous materials is considered to be one of the most important factors for distress types in road applications. The increasing interest in oxidative ageing has highlighted the need for ...
-
Chapter and Conference Paper
Lightweighting Through Stiffening Dart Formation and Its Rigidity Evaluation
are commonly added to enhance the bending stiffness of the components such that a thinner gauge can be used for lightweighting. It also helps to reduce springback in operation. This study investigates the...
-
Chapter and Conference Paper
Evaluating Pulse Simulator Using Fluorescent DIC
The artery vessel simulator mimics the pulse using a membrane pump to drive water flow through the PDMS phantom intermittently to simulate the blood flows in the artery vessel. The DIC method performs the eval...
-
Chapter and Conference Paper
Synchronous Extraction of Valuable Metals from Low-Nickel Matte Using Ammonium Sulfate Roasting-Water Leaching Process
Owing to suffering the poor recovery of valuable metals and the massive loss of Co metal by the traditional pyrometallurgical technology to process the low-nickel matte. Herein, a sulfate roasting followed by ...
-
Chapter and Conference Paper
Recovery of Chromium from Ferronickel Slag via Alkaline Roasting Followed by Water Leaching: Effect of Roasting Atmosphere
is a hazardous industrial waste containing a relatively high amount of , which poses a great potential threat to the environment. It is of great significance to recover from the for both economic and e...
-
Chapter and Conference Paper
Pb(II) Removal from Acidic Wastewater by Magnetic Manganese Ferrites Synthesized from Ferromanganese Ores
Pb(II) typical toxin in industrial wastewater, which has significant pollution risk for drinking water sources. Magnetic are a proven recyclable adsorption material on account of their excellent ferromag...
-
Chapter and Conference Paper
Reduction Kinetics Analysis of Fe2O3 in the Case of Carbon Precipitation
The of (purity 99.9%) in the case of carbon is investigated using the isothermal thermogravimetric (TG) analysis controlled gas-base reduction. The TG curves are recorded in the experimental process, and...
-
Chapter and Conference Paper
The Effect of the Addition of Cobalt Powder on Compressive Properties of Porous Titanium as Bone Substitute Materials
is considered as a potential bone substitute because of its good biocompatibility. In the preparation of , and can be distributed evenly in the matrix of with as an element. Such intermetallic ...
-
Chapter and Conference Paper
Solid Cylindrical Bar Torsion for Characterizing Shear Plastic Deformation and Failure
The method of thin-wall tube torsion to characterize metal’s shear response is well-known. Unfortunately, the thin wall tube specimen tends to buckle before reaching large shear deformation and failure. An alt...
-
Chapter and Conference Paper
Performance of Anodes with Proper Active Metal Elements Added to the Al–0.16wt%In in Alkaline Electrolyte for Al-Air Batteries
Wind energy and are stored in aluminum through aluminum electrolysis, and then the by metallic fuel cells realizes renewable energy utilization. Aluminum is an ideal material for metallic fuel cells. In ...
-
Chapter and Conference Paper
Enhanced Stability of B-Site W Doped Pr0.6Sr0.4Fe1-xWxO3-δ Ceramic Membranes for Water Splitting
A series of perovskite-type (OTM) of Pr0.6Sr0.4Fe1-xWxO3-δ (PSFWx, x = 0, 0.1) were synthesized by method. The effects of W do** on the , , and performance were investigated systematically. With the inc...
-
Chapter and Conference Paper
Separation and Recovery of Copper from Copper-Bearing Pyrite Cinder via an Acid Leaching Process
is a typical hazardous waste produced from sulfuric acid industry, which always contains a significant level of valuable metals. About 12 million tons of are generated in China annually, and the utilizati...
-
Chapter and Conference Paper
Study on High-Temperature Liquid Lithium Battery with LiI–KI Electrolyte
liquid metal lithium batteries have always occupied a very important position in the field of energy storage. It has high energy storage efficiency and long life. However, high operating temperatures and lo...
-
Chapter and Conference Paper
Deoxidation of TiAl Alloy Scraps with Metallic Yttrium and Calcium Fluoride Slag
Recently, the recycle of TiAl scrap becomes an important issue; however, its high oxygen content, which deteriorates , should be deoxidized. In this study, the scrap of is melted using the water-cooling c...
-
Chapter and Conference Paper
Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary Alloys
The present work deals with and of Mg–xGd–yNd (x = 10, 15; y = 2, 5) ternary alloys. Hardness, tensile, and compressive properties are measured on the as-cast alloys and the alloys after solid solution treatm...
-
Chapter and Conference Paper
Study the Deformation of Solid Cylindrical Specimens Under Torsion Using 360° DIC
In this work, the plastic deformation and ductile failure of solid Al 6061-T6 and 304L tube specimens under torsion loading was investigated using a new developed 360° DIC system. The tube specimens of both du...
