503 Result(s)
within
Article
**-**a Ding
English
Characterization and Evaluation of Materials
Optical and Electronic Materials
-
Article
Combined First-Principles and Machine Learning Study of Thermal Transport and Thermoelectric Properties of p-type Halide Perovskite CsCdX3 (X = Cl, Br)
The thermal transport and thermoelectric properties of CsCdX3 (X = Cl, Br) were investigated using first-principles calculations and machine learning interatomic potentials. The lattice thermal conductivity was o...
-
Article
Mechanisms of Genipin and MCNT effects on the actuation properties and failure of chitosan gel bionic artificial muscles
The poor actuation characteristics of current bionic artificial muscles limit their application in engineering practice. Chitosan and graphene are used as the main components to prepare bionic artificial muscl...
-
Article
Green Hydrothermal Preparation of Ag-CP Nanocomposites with Lily Bulbs for Non-Enzymatic Glucose Detection
Green synthesis represents a superior strategy for mitigating the adverse effects of chemical synthesis on the environment. In particular, the utilization of bio-sourced materials for nanomaterial synthesis c...
-
Article
High-performance SO2 gas sensor based on MXene/LaFeO3 nanotubes by electrospinning technology
Sulfur dioxide (SO2) is highly toxic, harmful to human health, and seriously pollutes the environment. In the present report, different ratios of MXene (Ti3C2Tx) loaded LaFeO3 nanotubes were obtained through etch...
-
Article
Evaluation of Parameters Coupling into ZT for Higher Output Performance
Thermoelectric power generation is an emerging renewable energy technology, while its widespread application has been limited by its constrained output capacity. The figure of merit (
-
Article
Photoelectrochemical and photo-Fenton properties of ZnFe2O4@g-C3N4 nanocomposites
In the social context of increasing water pollution, we conducted an in-depth study to prepare ZnFe2O4@g-C3N4 heterojunction nanocomposites by hydrothermal method. The microscopic morphology and structure were an...
-
Article
Polymer-based strain sensors: review
Strain sensors, as electronic components, convert non-quantitative strain states into visually perceivable electrical signal variations using strain gauges. They have extensive applications in various fields s...
-
Article
Gallium-Based Liquid Metal Flexible Electronics Prepared by Solid–Liquid Phase Transition
A facile fabrication method of pure gallium-based flexible electronics has been developed by using the solid–liquid phase transition at ambient temperature, effectively broadening the application of tradition...
-
Article
Reverse Design of a Sandwich Microwave Broadband Metamaterial Absorber Based on Resistive Film-PMI-Copper
In response to the current issues of narrow bandwidth and low design efficiency in absorbing structures, a reverse design study of broadband metamaterial absorbers is conducted. Utilizing a MATLAB-CST co-simul...
-
Article
Preparation of high capacity Sn2S3/Sn3S4/FeS/Fe7S8 heterostructure composite lithium-ion battery anodes from reducing agents Fe and tin-based sulfides
Tin-based sulfides, such as SnS2, have garnered attention as lithium-ion anode materials due to their layer structure and high conductivity capacity. However, during the lithium alloying/dealloying cycles, SnS2 m...
-
Article
Highly sensitive flexible strain sensors with novel tubular fiber design for human motion monitoring
Flexible strain sensors with high flexibility, high sensitivity, and wide stress/strain detection range are critical for applications in wearable devices. This work discusses the performance of flexible strain...
-
Article
The microwave absorption performance of NiFe2O4 prepared under the gradient magnetic field
The NiFe2O4 (NFO) assembly was synthesized via thermal decomposition in a gradient magnetic field, and its structure, composition, as well as magnetic and electromagnetic absorption properties were investigated. ...
-
Article
Investigations of the photoelectrochemical and photo-Fenton properties of TiO2/FeOCl nanocomposites
The TiO2/FeOCl composites were prepared by a simple calcination method, and the photo-Fenton performance of the TiO2/FeOCl photo-Fenton catalysts was investigated for the degradation of Rhodamine B (RhB) and Tetr...
-
Article
Structural optimization, interfacial contact, and transverse thermoelectric properties of Ag2Te/Bi0.5Sb1.5Te3 artificially tilted multilayer thermoelectric devices
Artificially tilted multilayer thermoelectric devices (ATMTDs) have attracted widespread attention due to their advantages of simple and stable structure. In this study, n-type Ag2Te and p-type Bi0.5Sb1.5Te3 (BiS...
-
Article
One-step synthesis of Li2Mg2Mo3O12-(Li1/2Bi1/2)MoO4 composite ceramics with a stable temperature coefficient for ULTCC applications
Dielectric materials with near-zero τf values are needed to enhance the thermal stability of devices and ensure their stability during temperatures changes. In this study, the introduction of the (Li1/2Bi1/2)MoO4
-
Article
Ultraviolet photodetectors based on wide bandgap semiconductor: a review
Ultraviolet (UV) photodetectors (PDs) are effective devices that convert UV radiation energy into electrical signals, and they are widely used in aerospace, chip manufacturing and other fields. At present, the...
-
Article
A temperature monitoring and fever alarm system composed of printing flexible electronics
Wearable electronic sensor technologies have gained extensive interest in recent years owing to the potential application in health care. However, the existing wearable electronic devices have low reproducibil...
-
Article
Low-temperature lead-free SnBiIn solder for electronic packaging
In pursuit of functionality and miniaturization in electronics, 3D integrated packaging requires low-temperature solders. This study explores a novel low-temperature lead-free SnBiIn solder. The solder has an ...
-
Article
Comparison of the Microstructural Characteristics and the Electrothermal Fracture Mechanism of Au-Pd-Coated Copper Wire and Cu-Ti Micro-alloyed Wire
This study compared the Au-Pd-coated copper (CPA) with the micro-alloyed copper wires (MAC) without a coating layer. Results have shown that heat treatment can improve the electrical properties of the wire, bu...
-
Article
Enhanced energy storage performance of silver niobate-based antiferroelectric ceramics by two-step sintering mothed
AgNbO3 lead-free antiferroelectric (AFE) ceramics are attractive candidates for energy storage applications and power electronic systems. In this study, AgNbO3 ceramics are synthesized by single-step sintering (S...
