Abstract
Mechanical theories show that properties of alloys are strongly dependent on the morphological parameters of their strengthening precipitates. However, accurate measurement of precipitates microstructure parameters is still a challenging task. In this article, we develop a quantitative electron tomography method by combining computer vision technology to accurately characterize the three-dimensional microstructure parameters, such as volume fractions, sizes and distributions, of the T1 and δ′/θ′/δ′ precipitates in Al–Cu–Li(–Mg) alloys. Since they have extremely large aspect-ratios in shape and large numbers in density upon formation in the Al matrix, these thin plate-like precipitates are difficult to be characterized quantitatively without the assistance of computer vision technology. It is shown that the property difference between two peak-aged states of the alloy can be well explained with the quantitative precipitate parameters correctly measured. Using these correct precipitate data, we also tested the validity of current mechanical models for projecting the contribution of precipitates to the strengths of the alloy, demonstrating that quantitative relations between strength and microstructure parameters still need to be refined.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig2_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig5_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig6_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig7_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig8_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig9_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40195-022-01411-9/MediaObjects/40195_2022_1411_Fig10_HTML.png)
Similar content being viewed by others
References
G.H. Wu, C.C. Shi, L. Zhang, W.C. Liu, A.T. Chen, W.J. Ding, Acta Metall. Sin. -Engl. Lett. 33, 1243 (2020)
B. Decreus, A. Deschamps, F. De Geuser, P. Donnadieu, C. Sigli, M. Weyland, Acta Mater. 61, 2207 (2013)
E. Gumbmann, F. De Geuser, C. Sigli, A. Deschamps, Acta Mater. 133, 172 (2017)
R.J. Rioja, J. Liu, Metall. Mater. Trans. A 43, 3325 (2012)
H.G. Li, J. Ling, Y.W. Xu, Z.G. Sun, H.B. Liu, X.W. Zheng, J. Tao, Acta Metall. Sin. -Engl. Lett. 28, 671 (2015)
J.F. Li, Z.H. Ye, D.Y. Liu, Y.L. Chen, X.H. Zhang, X.Z. Xu, Z.Q. Zheng, Acta Metall. Sin. -Engl. Lett. 30, 133 (2017)
Z. Gao, J.Z. Liu, J.H. Chen, S.Y. Duan, Z.R. Liu, W.Q. Ming, C.L. Wu, J. Alloys Compd. 624, 22 (2015)
Z. Gao, J.H. Chen, S.Y. Duan, X.B. Yang, C.L. Wu, Acta Metall. Sin. -Engl. Lett. 29, 94 (2016)
J.Z. Liu, S.S. Yang, S.B. Wang, J.H. Chen, C.L. Wu, J. Alloys Compd. 613, 139 (2014)
Y.Q. Chen, Z.Z. Zhang, Z. Chen, A. Tsalanidis, M. Weyland, S. Findlay, L.J. Allen, J.H. Li, N.V. Medhekar, L. Bourgeois, Acta Mater. 125, 340 (2017)
L. Bourgeois, C. Dwyer, M. Weyland, J.F. Nie, B.C. Muddle, Acta Mater. 59, 7043 (2011)
I. Häusler, C. Schwarze, M.U. Bilal, D.V. Ramirez, W. Hetaba, R.D. Kamachali, B. Skrotzki, Materials 10, 117 (2017)
S. Wang, C. Zhang, X. Li, J. Wang, J. Mater. Sci. 56, 10092 (2021)
S. Wang, C. Zhang, X. Li, H. Huang, J. Wang, J. Mater. Sci. Technol. 58, 205 (2020)
S.Y. Duan, C.L. Wu, Z. Gao, L.M. Cha, T.W. Fan, J.H. Chen, Acta Mater. 129, 352 (2017)
S.Y. Duan, Z. Le, Z.K. Chen, Z. Gao, J.H. Chen, W.Q. Ming, S.Y. Li, C.L. Wu, N. Yan, Mater Charact. 121, 207 (2016)
S.Y. Li, Q. Wang, J.H. Chen, C.L. Wu, Mater. Charact. 176, 111123 (2021)
F.J. Niu, J.H. Chen, C.L. Wu, J. Wu, X.D. Xu, P. **e, X.W. Yu, Acta Metall. Sin. -Engl. Lett. 33, 1527 (2020)
X.W. Yu, J.H. Chen, W.Q. Ming, X.B. Yang, T.T. Zhao, R.H. Shen, Y.T. He, C.L. Wu, Acta Metall. Sin. -Engl. Lett. 33, 1518 (2020)
X.P. Gong, S.F. Luo, S.Y. Li, C.L. Wu, Acta Metall. Sin. -Engl. Lett. 34, 597 (2021)
J.F. Nie, B.C. Muddle, I.J. Polmear, Mater. Sci. Forum 217–222, 1257 (1996)
Y. Yang, G. He, Y. Liu, K. Li, W. Wu, C. Huang, J. Mater. Sci. 56, 18368 (2021)
J.F. Nie, B.C. Muddle, Mater. Sci. Eng. A 319–321, 448 (2001)
T. Dorin, A. Deschamps, F. De Geuser, C. Sigli, Acta Mater. 75, 134 (2014)
T. Dorin, A. Deschamps, F. De Geuser, W. Lefebvre, C. Sigli, Philos. Mag. 94, 1012 (2014)
J.F. Nie, B.C. Muddle, JPE 19, 543 (1998)
B.I. Rodgers, P.B. Prangnell, Acta Mater. 108, 55 (2016)
F. De Geuser, F. Bley, A. Deschamps, J. Appl. Cryst. 45, 1208 (2012)
H. Zhao, B. Gault, D. Ponge, D. Raabe, F. De Geuser, Scr. Mater. 154, 106 (2018)
Y.X. Lai, T.W. Fan, M.J. Yin, C.L. Wu, J.H. Chen, J. Mater. Sci. Technol. 41, 127 (2020)
Y. Liu, Y.X. Lai, Z.Q. Chen, S.L. Chen, P. Gao, J.H. Chen, J. Alloys Compd. 885, 160942 (2021)
B.M. Gable, A.W. Zhu, A.A. Csontos, E.A. Starke Jr., J. Light Met. 1, 1 (2001)
C. Kübel, A. Voigt, R. Schoenmakers, M. Otten, D. Su, T.C. Lee, A. Carlsson, J. Bradley, Microsc. Microanal. 11, 378 (2005)
S.K. Malladi, Q. Xu, M.A. van Huis, F.D. Tichelaar, K.J. Batenburg, E. Yücelen, B. Dubiel, A. Czyrska-Filemonowicz, H.W. Zandbergen, Nano Lett. 14, 384 (2014)
R.H. Shen, Y.T. He, W.Q. Ming, Y. Zhang, X.D. Xu, J.H. Chen, J. Mater. Sci. Technol. 100, 75 (2022)
D. Wolf, A. Lubk, H. Lichte, Ultramicroscopy 136, 15 (2014)
C. Dwyer, M. Weyland, L.Y. Chang, B.C. Muddle, Appl. Phys. Lett. 98, 201909 (2011)
P. Viola, M.J. Jones, Int. J. Comput. Vis. 57, 137 (2004)
C.D. Marioara, S.J. Andersen, H.W. Zandbergen, R. Holmestad, Metall. Mater. Trans. A 36, 691 (2005)
F. Jiang, S. Takaki, T. Masumura, R. Uemori, H. Zhang, T. Tsuchiyama, Int. J. Plast. 129, 102700 (2020)
K. Ma, H. Wen, T. Hu, T.D. Top**, D. Isheim, D.N. Seidman, E.J. Lavernia, J.M. Schoenung, Acta Mater. 62, 141 (2014)
Acknowledgements
This work is financially supported by the National Natural Science Foundation of China (Nos. 51831004, 52171006 and 11427806).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors state that there are no conflicts of interest to disclose.
Supplementary Information
Below is the link to the electronic supplementary material.
Supplementary file2 (MP4 1705 kb)
Supplementary file3 (MP4 1150 kb)
Supplementary file4 (MP4 2112 kb)
Supplementary file5 (MP4 1536 kb)
Supplementary file6 (MP4 2457 kb)
Supplementary file7 (MP4 1303 kb)
Supplementary file8 (MP4 6389 kb)
Supplementary file9 (MP4 10233 kb)
Rights and permissions
About this article
Cite this article
Li, SY., Shen, RH., He, YT. et al. Quantitative Electron Tomography for Accurate Measurement of Precipitates Microstructure Parameters in Al–Cu–Li Alloys. Acta Metall. Sin. (Engl. Lett.) 35, 1882–1894 (2022). https://doi.org/10.1007/s40195-022-01411-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-022-01411-9