Abstract
The need for corporations to expand or functionally alter their existing multi-story buildings increases because of rapid changes in the competitive environment. However, limited by building structures and the availability of space, when planning cross-level material handling, effective article transfer equipment integration becomes an important issue. The complexity and difficulty is far greater than that for traditional article transfer operations on a single-level floor area. Therefore, based on the concept of personal computers being able to replace IBM mainframes in the market, this paper proposed a smaller and more mobile multi-level device for article transfers that has the capacity to integrate other plant equipment to replace the conventional conveying device. This paper will make suggestions for cross-level article transfer device applications for use in different environments and industries. The structure of this facility is simple and its modularized design allows flexible expansion to accommodate corporate growth. This is a well-planed system that can serve as a reference for corporations intending to implement multi-level article transfer systems.
Similar content being viewed by others
References
Sue DR (1994) Manufacturing facilities: location, planning, and design. PWS, Boston
Francis RL, McGinnis LF, White JA (1992) Facility layout and location: an analytical approach. Prentice-Hall, New York
Mahajan S, Rao BV, Peters BA (1998) Retrieval sequencing heuristic for miniload end-of-aisle automated storage/retrieval systems. Int J Prod Res 36(6):1715–1731
Daniels RL, Flummel JL, Schantz R (1998) Model for warehouse order picking. Eur J Oper Res 105(1):1–17
Hwang H, Song J-Y (1993) Sequencing picking operations and travel time models for man-on-board storage and retrieval warehousing system. Int J Prod Econ 29(1):75–88
De Koster MBM, Van Der Poort ES, Wolters M (1999) Efficient order batching methods in warehouses. Int J Prod Res 37(7):1479–1504
Chew E-P, Tang L-C (1999) Travel time analysis for general item location assignment in a rectangular warehouse. Eur J Oper Res 112(3):582–597
De Koster R, Van Der Poort E (1998) Routing order pickers in a warehouse: a comparison between optimal and heuristic solutions. IIE Trans 30(5):469–480
Malmborg CJ (2001) Rule of thumb heuristics for configuring storage racks in automated storage and retrieval systems design. Int J Prod Res 39(3):511–527
Vaughan TS, Petersen CG (1999) Effect of warehouse cross aisles on order picking efficiency. Int J Prod Res 37(4):881–897
Hesen PMC, Renders PJJ, Rooda JE (2001) Application of a layout/material handling design method to a furnace area in a 300 mm wafer fab. Int J Adv Manuf Technol 17(3):216–220
Lee GH (2001) Design of components and layout of machines for material handling. Int J Adv Manuf Technol 17(5):371–382
Moon S-W, Hwang H (1999) Determination of unit load sizes of AGV in multi-product multi-line assembly production systems. Int J Prod Res 37(15): 3565–3581
Yang TH, Su CT, Hsu YR (2000) Systematic layout planning: a study on semiconductor wafer fabrication facilities. Int J Oper Prod Manage 20(11–12):1360–1372
Castillo I, Peters BA (2002) Unit load and material-handling considerations in facility layout design. Int J Prod Res 40(13):2955–2989
Chan FTS (2002) Design of material handling equipment selection system: an integration of expert system with analytic hierarchy process
Ting J-H, Tanchoco JMA (2001) Optimal bidirectional spine layout for overhead material handling systems. IEEE Trans Semiconduct Manuf 14(1):57–64
Bagdahn J, Knoll H, Wiemer M, Petzold M (2003) A new approach for handling and transferring of thin semiconductor materials. Microsyst Technol 9(3):204–209 approach. Integr Manuf Syst 13(1):58–68
Zhou Z, Li L (2003) Single hoist cyclic scheduling with multiple tanks: a material handling solution. Comput Oper Res 30(6):811–819
Jawahar N, Aravindan P, Ponnambalam SG, Suresh RK (1998) AGV schedule integrated with production in flexible manufacturing systems. Int J Adv Manuf Technol 14(6):428–440
Lindsay C, Bright G, Hippner M (2000) Advanced material handling system for computer integrated manufacturing. Robot Comput Integr Manuf 16(6): 437–441
Mireles J, Lewis FL (2001) Intelligent material handling: Development and implementation of a matrix-based discrete-event controller. IEEE Trans Ind Electr 48(6):1087–1097
Lee S, Lee KC, Lee MH, Harashima F (2002) Integration of mobile vehicles for automated material handling using Profibus and IEEE 802.11 networks. IEEE Trans Ind Electr 49(3):693–701
Berman S, Edan Y, Jamshidi M (2003) Navigation of decentralized autonomous automatic guided vehicles in material handling. IEEE Trans Robot Automat 19(4):743–749
Chang T-S, Hsieh Y-A, Yang C-H (2000) Warehousing system having a conveying device for transferring articles between two levels of a multistory building, U.S. Patent No. 06113336
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chang, TS., Fu, HP. & Hsu, RC. The innovative conveying device application for transferring articles between two-levels of a multi-story building. Int J Adv Manuf Technol 28, 197–204 (2006). https://doi.org/10.1007/s00170-004-2346-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-004-2346-6