Search
Search Results
-
Tensile Fracture Property of Concrete Affected by Interfacial Transition Zone
As a weak link between aggregate and mortar in concrete, interfacial transition zone (ITZ) usually plays a key role in concrete fracture. To...
-
Effect of oxide inclusions on MnS precipitates and tensile mechanical property of high-strength low-alloy steel
The key role of oxide inclusions on the microstructure and mechanical property of a high-strength low-alloy steel was investigated. The field...
-
Effect of Cooling Rates on Solidification Microstructures and Tensile Property of a Novel Wrought Superalloy
The effects of cooling rates on solidification behaviors, segregation characteristics and tensile property of GH4151 alloy were investigated using...
-
Effect of Heat Treatment on Gradient Microstructure and Tensile Property of Laser Powder Bed Fusion Fabricated 15-5 Precipitation Hardening Stainless Steel
This work investigated the gradient microstructure evolution and tensile property of LPBF fabricated 15-5 precipitation hardening stainless steel in...
-
Effect of slow shot speed on externally solidified crystal, porosity and tensile property in a newly developed high-pressure die-cast Al-Si alloy
The effect of slow shot speed on externally solidified crystal (ESC), porosity and tensile property in a newly developed high-pressure die-cast Al-Si...
-
Tensile Testing
Tensile or tension testing is a fundamental and most commonly used test for the characterization of the mechanical behavior of materials. The test... -
Tensile Property Evaluation of Additively Manufactured Ti–6Al–4V/Yttria-Stabilized Zirconia Composite Using Absolute Nonlinear Ultrasonic Technique
Directed energy deposition (DED), which is used to fabricate 3D metal components layer-by-layer, is a form of additive manufacturing....
-
Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment
The CrMnFeCoNi high-entropy alloy (HEA) has attracted extensive attention due to its excellent ductility and fracture toughness. However, this kind...
-
Investigation of Tensile and Flexural Property of 316L Stainless Steel-Coated Polylactic Acid Parts
Additive manufacturing (AM) has emerged as a globally adopted, powerful tool of manufacturing over traditional manufacturing techniques owing to its...
-
High Temperature Tensile Property and Fracture Behavior of Directionally Solidified Fe-Al-Ta Eutectic Composites
Fe-Al-Ta eutectic composites with solidification rates of 6, 20, 30, 80 and 200μm/s were obtained by a modified Bridgman directional solidification...
-
Improvement of tensile strength and anti-oxidation property of graphite electrode for electric arc furnace through heterogenization of binder pitch
This study involved the heterogenization of a binder pitch (BP) using a small amount of nanocarbon to improve physical properties of the resulting...
-
Hot Compression Behavior and Tensile Property of a Novel Ni–Co-Based Superalloy Prepared by Electron Beam Smelting Layered Solidification Technology
The hot compression behavior and tensile strength after compression of a new Ni–Co-based superalloy produced using electron beam smelting layered...
-
Evolution characteristics of engineered cementitious composite pore structure and its correlation with the tensile property under simulated traffic vibrations at an early age
The repair construction of bridge decks typically involves the method of half-width traffic and half-width construction, where traffic vibrations...
-
Effects of Bi Inclusion on Tensile Mechanical Property and Deformation Mechanism of Nanopolycrystalline Fe: A Molecular Dynamics study
AbstractThe effects of bismuth inclusion on the mechanical properties and deformation mechanisms of nanopolycrystalline iron under uniaxial tensile...
-
Effects of Aging Hardenability and Microporosity Variation on the Quality Index of the Tensile Property of Al-6Si-xMg Casting Alloys
The relative contribution of aging hardenability to the overall dependence of tensile properties on microporosity variation in Al-6Si casting alloys...
-
Microstructure and Tensile Property of Al3Zr/Al-Cu-Ni-V Composite Prepared by In Situ Reaction
In this work, the high-temperature stable D0 23 -Al 3 Zr was introduced to an Al-Cu-Ni-V alloy to improve the HT (350 °C) mechanical properties by the...
-
Effect of Beam Oscillation on Microstructure and Tensile Property of Electron Beam-Welded Commercially Pure (CP) Titanium
In the present study, electron beam welding of commercially pure titanium has been carried out at an accelerating voltage of 60 kV, current of 40 mA,...
-
Evaluating Tensile Fractures in Rigid Clasts with Very High Aspect Ratio
AbstractWe investigate how a highly elliptical and mechanically rigid clast embedded in an infinite rock mass respond to the far-field stresses. The...
-
Fabrication of lightweight, tough polypropylene composite foams: effects of nucleating agent structure on the foaming behavior and tensile property of polypropylene foams
The type and structure of nucleating agents have an important influence on the properties of the final foam as well as on the nucleation of the...
-
Tensile failure and acoustic emission characteristics of rock salt under different tensile testing conditions
The tensile strength of rock salt is an important parameter in the salt cavern gas storage project. Due to the high requirements for experimental...