Search
Search Results
-
Simultaneously enhanced interfacial shear strength and tensile strength of heterocyclic aramid fiber by graphene oxide
Heterocyclic aramid fibers, a typical kind of high-performance fibers, have been widely used in aerospace and protection fields because of their...
-
The Tensile Strength of Polymer Fibres
A theory of the tensile strength of oriented polymer fibres is presented. From an analysis of the observed fracture envelope it is shown that the...
-
Investigating the effect of tensile shear strength of resistance spot welding using a neuro fuzzy control system
Resistance spot welding (RSW) stands out as a widely adopted method, especially in the automotive sector, for joining thin sheets of various...
-
Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints
The reliable use of ultrasonic metal welding requires a thorough understanding of the relevant bonding mechanisms. This article presents an approach...
-
Influences of Joint Persistence on the Compressive-Shear and Tensile-Shear Failure Behavior of Jointed Rock Mass: An Experimental and Numerical Study
The non-persistent jointed rock mass is prone to compressive-shear and tensile-shear failures. Tensile-shear failure has been studied less than...
-
Numerical simulation study on shear resistance of anchorage joints considering tensile–shear fracture criterion of 2G-NPR bolt
2G-NPR bolt (the 2nd generation Negative Poisson’s Ratio bolt) is a new type of bolt with high strength, high toughness and no yield platform. It has...
-
Study on prediction of tensile-shear strength of weld spot based on an improved neural network algorithm
Spot welding is one of the main connection methods of automobile parts. The tensile-shear strength of spot welding joint is the most important...
-
Acoustic emission characteristics in tensile-shear failure of non-persistent jointed rocks with different undulation angles
Tensile-shear failure commonly occurs during the construction of deep in-situ tunnels. In this paper, direct tensile-shear tests were conducted on...
-
Determining Concrete Tensile Strength in ASR-Damaged Slabs and Shells Without Transverse Reinforcement
This study addresses the crucial issue of determining the tensile strength in alkali-silica reaction (ASR)-damaged concrete slabs and shells without...
-
Laboratory Shear Behavior of Tensile- and Shear-Induced Fractures in Sandstone: Insights from Acoustic Emission
The distinction between the shear behavior of tensile- and shear-induced fractures is critical to understanding the deformation and failure of...
-
A Method for Tensile Strength Prediction of Composite Laminates
From the perspective of engineering application, a method to predict the tensile strength of the carbon fiber reinforced polymer (CFRP) was proposed...
-
Experimental Study on Performance of Bolted Joints Under Tensile–Shear Loads
Bolt support is an effective method to improve the shear resistance of jointed rock mass, and is widely used in the reinforcement of fractured rock...
-
The Uniaxial Tensile Strength of Compacted Expansive Soils
Desiccation cracks are the most prevalent cause of engineering geological problems with expansive soils, and tensile strength is the major...
-
Workmanship Impact on Raw Earth Masonry Tensile Strength
Earthen masonry has observed a resurgence of interest in recent years with the urgent need to address climate change. However, its use can be...
-
A novel method of predicting shear strength of fiber-reinforced high-strength concrete based on cube specimens: part-1
Shear failure in concrete structures is sudden and catastrophic. From past few decades, the shear behavior of concrete of various kinds is studied...
-
Tensile, flexural and interlaminar shear strength of carbon fiber reinforced epoxy composites modified by graphene
In order to investigate the effects of different functional groups on graphene on the mechanical behavior of carbon fiber reinforced epoxy composites...
-
Investigating the Effect of Electrode Pressure on Nugget Size, Microstructure and Tensile Shear Strength of Resistance Spot Welded Advanced High Strength Dual Phase Steel Joints
The main objective of this investigation is to study the effect of electrode pressure on nugget formation, microstructural features and tensile shear...
-
Modeling of Independent Versus Dependent Tensile–Frictional Strength Behavior of Jointed Rocks
The failure mechanisms of non-persistent jointed rocks are crucial in understanding rock mass behaviour. This paper investigates the relationship...
-
Shear strength and failure criterion analysis of steel fiber reinforced concrete exposed to elevated temperature under combined compression–shear loading
Adding steel fiber to concrete preparation to enhance residual strength and ductility is a potential solution to improve reliability of specific...
-
Shear strength characteristics of basalt fiber-reinforced loess
Loess owns the characteristics of collapsibility, disintegration and solubility, which pose a challenge to engineering construction. To examine the...
