Search
Search Results
-
On Determination of Temperature of Attainable Water Superheat: Issues of Experiment Procedure
AbstractThe article focuses on the features of a procedure for determination of the temperature of attainable water superheat (relative to the...
-
Thermal Distortion Testing at Ferrous Superheat Temperatures
As the ever-growing need to produce complex castings increases, so does the complexity of cores and molds. In order to accomplish near-net-shape...
-
Effect of Superheat on Microstructure and Mechanical Properties of Al-7Si-2Fe Alloy
Recycling of aluminum (Al) alloys is critical to meet the demands of global net zero emission targets. The major challenge in the recycling of Al...
-
Coupling Enhancement Effect of the Magnetic Field and Wall Superheat on Boiling Heat Transfer Characteristics of Magnetic Nanofluid (MNF) under Reduced Gravity
How to reduce or even eliminate the influence of gravity on boiling heat transfer, how to restrain the emergence of abnormally large bubbles and how...
-
Design of Particle Swarm Optimized Fuzzy PID Controller and Its Application in Superheat Degree Control
Heat pump system operation is often accompanied by strong coupling, large time lag and nonlinear characteristics, strong coupling will lead to more... -
Thin-film evaporation characteristics of molten magnesium and magnesium chloride in a microchannel of titanium sponge
To optimize the distillation process and evaluate evaporation in the production of titanium sponge using the magnesiothermic method, it is necessary...
-
Influence of Surface Unevenness on Enhancement of Heat Transfer During Saturated Pool Boiling of Acetone
The present investigation focuses on an experimental pool boiling of acetone over flat stainless steel surface under saturated atmospheric pressure.... -
Parameters Optimization for Superheated Steam Huff and Puff and Superheated Steam Flooding with Horizontal Wells in Heavy Oil Reservoir
The optimized parameters suitable for general wet steam huff and puff and steam flooding will not apply to superheated steam because its quality... -
Energy and exergy analysis of waste heat recovery from pressurized hot smothering steel slag by solar organic Rankine cycle
In this study, the energy and exergy of the organic Rankine cycle driven by steel slag waste heat and solar energy were analyzed for various system...
-
Pool Boiling Heat Transfer Enhancement Using Nanoparticle Coating on Copper Substrate
Nanomaterial deposition is a very promising technique used in enhancing the heat transfer performance used for various application such as cooling... -
Study on the Effect of SEMS on the As-Cast Structure of Steel in Thin Slab Continuous Casting Using an Equiaxed-Columnar Solidification Model
Strand electromagnetic stirring (SEMS) is widely applied in thin slab continuous casting to improve the equiaxed crystal ratio (ECR) of steel. To...
-
Demystifying the Mushroom Formation Mechanism in BOF Steelmaking Using Physical Modeling Approach and Plant Trial
Bottom stirring in steel making BOF furnaces have become popular due to better mixing and achieving desired end blow chemistry. However, active life...
-
Experimental Study of Onset of Nucleate Boiling from Submerged Ribbon Heaters of Varying Width
In a heat transfer system, the point of onset of nucleate boiling (ONB) is important as it distinguishes boiling regime from the natural convection... -
Pool Boiling Crisis, Critical Heat Flux and Film Boiling
In Chap. 6, we have seen that during nucleate boiling the heat flux increases with wall superheat. However, the Nukiyama curve (Fig. 6.9) clearly... -
Effects of Superheat and Solute Additions on the Grain Size in Binary Copper Alloys
By utilizing data from the literature, we examine the effects of superheat and solute additions on the grain size (as measured by columnar grain...
-
Power and Refrigeration
This chapter covers two engineering applications of thermodynamics of great importance for humanity, namely power production by external and internal... -
Effect of dense packed micro-/nano-porous thin film surfaces developed by a combined method of etching, electrochemical deposition and sintering on pool boiling heat transfer performance
The transportation of quick latent heat during phase change heat transfer (boiling) guides its prospective application in various heat transfer...
-
Application of PLC and HMI in the CO2 transcritical refrigeration experimental platform
The paper adopted SIMATIC PLC as the control center and cooperates with SIMATIC KTP900 basic touch screen and GRM533YW-C IOT module to design a CO 2 ...
-
Pool Boiling Heat Transfer Enhancement Using Nanoparticle Coating on Copper Substrate
Nanomaterial deposition is a very promising technique used in enhancing the heat transfer performance used for various application such as cooling... -
Numerical-and-Experimental Substantiation of Deep Unloading of an E-420-13.8-560GM Boiler
AbstractOne of the main characteristics of the maneuverability of power equipment is whether the load may be reduced to the minimum allowable level....